High Temperature Behavior of Al-7Si-0.4Mg Alloy with Er and Zr Additions

In recent years, many efforts have been devoted to the development of innovative Al-based casting alloys with improved high temperature strength. Research is often oriented to the investigation of the effects of minor element additions to widely diffused casting alloys. The present study focuses on Al-7Si-0.4Mg (A356) alloy with small additions of Er and Zr. Following previous scientific works on the optimization of heat treatment and on tensile strength, creep tests were carried out at 300 degrees C under applied stress of 30 MPa, a reference condition for creep characterization of innovative high-temperature Al alloys. The alloys containing both Er and Zr displayed a lower minimum creep strain rate and a longer time to rupture. Fractographic and microstructural analyses on crept and aged specimens were performed to understand the role played by eutectic silicon, by the coarse intermetallics and by alpha-Al matrix ductility. The creep behavior in tension of the three alloys has been discussed by comparing them to tension and compression creep curves available in the literature for Al-7Si-0.4Mg improved by minor elemental additions.

Automated summary

This study focuses on investigating the creep behavior of Al-7Si-0.4Mg (A356) alloy with small additions of Er and Zr at high temperatures. Alloys containing both Er and Zr displayed improved creep performance. Fractographic and microstructural analyses were performed to understand the role of eutectic silicon, coarse intermetallics, and alpha-Al matrix ductility in the alloys' performance.