Related references
Note: Only part of the references are listed.Investigation on the Effect of Stirring Process Parameters on the Dispersion of SiC Particles Inside Melting Crucible
Vishal R. Mehta et al.
METALS AND MATERIALS INTERNATIONAL (2021)
Evaluation of Mechanical and Microstructure Properties of Mg-Modified Aluminum Matrix Composite by Vortical Casting Method
Saeed Pashmforoosh et al.
METALS AND MATERIALS INTERNATIONAL (2021)
Studies on the Influence of Stirrer Blade Design on the Microstructure and Mechanical Properties of a Novel Aluminum Metal Matrix Composite
Pradeep Kumar Krishnan et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2021)
Mo-enhanced chemical stability of TiC nanoparticles in molten Al
Shuaihang Pan et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
High - temperature interaction of molten Fe-C-O-Cr alloys with corundum
Lenka Rehackova et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
Wettability and joining of SiC by Sn-Ti: Microstructure and mechanical properties
Wei Fu et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)
Effect of titanium binder addition on the interface structure and three-body abrasive wear behavior of ZTA ceramic particles-reinforced high chromium cast iron
Baochao Zheng et al.
CERAMICS INTERNATIONAL (2020)
A study on the impact and fatigue failure of AZ91E-Ni coated alumina composites
D. Sameer Kumar et al.
CANADIAN METALLURGICAL QUARTERLY (2020)
Fatgiue behavior of metal matrix nanocomposites
Massoud Malaki et al.
CERAMICS INTERNATIONAL (2020)
The role of accumulative roll bonding after stir casting process to fabricate high-strength and nanostructured AA2024-(SiO2+TiO2) hybrid nanocomposite
Mehrdad Shayan et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Fabrication of AA2024-TiO2 nanocomposites through stir casting process
Mehrdad Shayan et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2020)
Wettability-enabling coating on oxide particles through controlled milling
J. M. Auger et al.
POWDER TECHNOLOGY (2019)
Advanced Metal Matrix Nanocomposites
Massoud Malaki et al.
METALS (2019)
Roles of alloying elements in wetting of SiC by Al
Qin An et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Wettability and interaction mechanism for Ni-modified ZTA particles reinforced iron matrix composites
Juanjian Ru et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Synthesis of AA2024-(SiO2np + TiO2np) hybrid nanocomposite via stir casting process
Mehrdad Shayan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Air-isolated stir casting of homogeneous Al-SiC composite with no air entrapment and Al4C3
W. Y. Zhang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)
Nanoparticulate dispersion, microstructure refinement and strengthening mechanisms in Ni-coated SiCp/Al-Cu nanocomposites
Jian-Feng Xie et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Study on Interface Behavior of SiC/SiO2/Al and SiC/Ni/Al
Xiaohong Wang et al.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2019)
Tribological behavior of A356-CNT nanocomposites fabricated by various casting techniques
Benyamin Abbasipour et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2019)
Improved sintering ability of SiC ceramics from SiC@Al2O3 core-shell nanoparticles prepared by a slow precipitation method
Yiteng Liu et al.
CERAMICS INTERNATIONAL (2019)
The Effect of Electromagnetic Stirrer on the Size and Morphology of Intermetallic Particles in Al-Si Metal Matrix Composite
Mohsen Ostad Shabani et al.
SILICON (2019)
Effect of metal coating of reinforcements on the microstructure and mechanical properties of Al-Al2O3 nanocomposites
Shirin Pourhosseini et al.
MATERIALS SCIENCE AND TECHNOLOGY (2018)
Investigation of impeller design and flow structures in mechanical stirring of molten aluminum
Takuya Yamamoto et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
Effect of TiC Nanoparticles Supported by Ti Powders on the Solidification Behavior and Microstructure of Pure Aluminum
Bingyi Zhao et al.
METALS AND MATERIALS INTERNATIONAL (2018)
Effects of Pd ion implantation and Si addition on wettability of Al/SiC system
Zhikun Huang et al.
SURFACE & COATINGS TECHNOLOGY (2018)
Modification of ZTA particles with Ni coating by electroless deposition
J. Ru et al.
SURFACE ENGINEERING (2017)
Investigation on the Tensile Strength and Microhardness of AA6061/TiC Composites by Stir Casting
J. Jebeen Moses et al.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2017)
The influence of nickel coating on the interface of pressureless infiltrated with vibration Al-SiC composites
Setare Elahinejad et al.
MATERIALS RESEARCH EXPRESS (2017)
The role of reactivity in wetting by liquid metals: a review
N. Eustathopoulos et al.
JOURNAL OF MATERIALS SCIENCE (2016)
Dry sliding wear characteristics of in situ synthesized Al-TiC composites
Abhishek Kumar et al.
COMPOSITE INTERFACES (2016)
On the Mechanism of Ultrasound-Driven Deagglomeration of Nanoparticle Agglomerates in Aluminum Melt
Olga Kudryashova et al.
JOM (2016)
Wettability and Reactivity of ZrB2 Substrates with Liquid Al
R. Nowak et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2016)
Strengthening Al-Bi-TiC0.7N0.3 nanocomposites by Cu addition and grain refinement
Chezheng Cao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Wettability of zirconium-coated alumina by molten aluminum
Qian-Gang Xu et al.
SURFACE & COATINGS TECHNOLOGY (2016)
Effect of Ca addition on interface formation in Al(Ca)/Al2O3 composites prepared by gas pressure assisted infiltration
M. Nosko et al.
MATERIALS & DESIGN (2016)
Influence of SiC surface polarity on the wettability and reactivity in an Al/SiC system
Ping Shen et al.
APPLIED SURFACE SCIENCE (2015)
Wetting and interfacial behavior of molten Cu on Co-Si(Mo) coated SiC
S. T. Zhao et al.
CERAMICS INTERNATIONAL (2015)
A comparison study of applying metallic coating on SiC particles for manufacturing of cast aluminum matrix composites
R. Taherzadeh Mousavian et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
Aluminum-Based Cast In Situ Composites: A Review
S. L. Pramod et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2015)
Effects of reinforcement surface modification on the microstructures and tensile properties of SiCp/Al2014 composites
Long-Jiang Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Processing and properties of magnesium containing a dense uniform dispersion of nanoparticles
Lian-Yi Chen et al.
NATURE (2015)
In situ observation and analysis of ultrasonic capillary effect in molten aluminium
I. Tzanakis et al.
ULTRASONICS SONOCHEMISTRY (2015)
Wetting of polycrystalline SiC by molten Al and Al-Si alloys
Xiao-Shuang Cong et al.
APPLIED SURFACE SCIENCE (2014)
Surface characterization of Mo-implanted 6H-SiC by high temperature non-reactive wetting tests with the Ni-56Si alloy
S. T. Zhao et al.
CERAMICS INTERNATIONAL (2014)
A New Approach to Ultrasonic Degassing to Improve the Mechanical Properties of Aluminum Alloys
H. Puga et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2014)
Effects of continuous and discontinuous ultrasonic treatments on mechanical properties and microstructural characteristics of cast Al413-SiCnp nanocomposite
M. R. Dehnavi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Effects of Cu interlayer on the wettability of aluminum on carbon
Young Jin Ko et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2013)
Mechanical characterization of copper coated carbon nanotubes reinforced aluminum matrix composites
Adnan Maqbool et al.
MATERIALS CHARACTERIZATION (2013)
Recent progress in the development and properties of novel metal matrix nanocomposites reinforced with carbon nanotubes and graphene nanosheets
Sie Chin Tjong
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2013)
Metallurgical and mechanical characterization of stir cast AA6061-T6-AlNp composite
B. Ashok Kumar et al.
MATERIALS & DESIGN (2012)
On the impact of ultrasonic cavitation bubbles
A. Abdullah et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2012)
Properties of magnesium alloys reinforced with nanoparticles and carbon nanotubes: a review
Hajo Dieringa
JOURNAL OF MATERIALS SCIENCE (2011)
The wettability and interface thermal resistance of copper/graphite system with an addition of chromium
Zechao Tao et al.
MATERIALS CHEMISTRY AND PHYSICS (2011)
Microstructure and mechanical properties of Al-Al2O3 micro and nano composites fabricated by stir casting
S. A. Sajjadi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Fabrication and characterization of Al/SiCp composites by CAR process
Sajjad Amirkhanlou et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Wettability of Ni-Cr filler on SiC ceramic and interfacial reactions for the SiC/Ni-51Cr system
Yangwu Mao et al.
SCRIPTA MATERIALIA (2011)
Surface tension of liquid metals and alloys - Recent developments
I. Egry et al.
ADVANCES IN COLLOID AND INTERFACE SCIENCE (2010)
Survey on wetting of SiC by molten metals
G. W. Liu et al.
CERAMICS INTERNATIONAL (2010)
The effect of strontium on the microstructure and wear properties of A356-10%B4C cast composites
H. R. Lashgari et al.
MATERIALS & DESIGN (2010)
The effect of Fe, Mn and Sr on the microstructure and tensile properties of A356-10% SiC composite
K. Abedi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Effect of magnesium addition on the wetting of alumina by aluminium
Ali Sangghaleh et al.
APPLIED SURFACE SCIENCE (2009)
Processing and properties of copper-coated carbon fibre reinforced aluminium alloy composites
B. Bhav Singh et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
Processing of silicon carbide-boron carbide-aluminium composites
Gursoy Arslan et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2009)
Wettability improvement of carbon ceramic materials by mono and multi energy plasma pulses
M. Barlak et al.
SURFACE & COATINGS TECHNOLOGY (2009)
Anisotropy of Wetting
Dominique Chatain
Annual Review of Materials Research (2008)
An investigation of the effect of SiC reinforcement coating on the wettability of Al/SiC system
C. Tekmen et al.
JOURNAL OF COMPOSITE MATERIALS (2008)
Review of non-reactive and reactive wetting of liquids on surfaces
Girish Kumar et al.
ADVANCES IN COLLOID AND INTERFACE SCIENCE (2007)
Optimization of mixing parameters through a water model for metal matrix composites synthesis
K. R. Ravi et al.
MATERIALS & DESIGN (2007)
Wettability of Co-V, and PdNi-Cr-V system alloys on SiC ceramic and interfacial reactions
Hua-Ping Xiong et al.
SCRIPTA MATERIALIA (2007)
Computational and experimental analysis of particulate distribution during Al-SiC MMC fabrication
S. Naher et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)
Wettability and spreading kinetics of molten aluminum on copper-coated ceramics
C. A. Leon et al.
JOURNAL OF MATERIALS SCIENCE (2006)
Influence of stirring speed and stirring time on distribution of particles in cast metal matrix composite
SB Prabu et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2006)
Reassessment of the binary aluminum-titanium phase diagram
Julius C. Schuster et al.
JOURNAL OF PHASE EQUILIBRIA AND DIFFUSION (2006)
Development and assessment of a new quick quench stir caster design for the production of metal matrix composites
S Naher et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2005)
Reactive wetting in titanium carbide/non-reactive metal systems
N. Frage et al.
CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2005)
Measurement of contact angle and work of adhesion at high temperature
N Eustathopoulos et al.
JOURNAL OF MATERIALS SCIENCE (2005)
Interfacial phenomena in wettability of TiC by Al-Mg alloys
A Contreras et al.
ACTA MATERIALIA (2004)
Effect of Sr addition on an Al-7Si-10 vol.% SiCP cast composites
JA Garcia-Hinojosa et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Wetting, adhesion and adsorption in Al-Si/(01(1)over-bar-2) α-alumina system at 1723 K
P Shen et al.
MATERIALS TRANSACTIONS (2004)
Effect of La on the wettability of Al2O3 by molten aluminum
N Shao et al.
MATERIALS LETTERS (2004)
Simulation of the stir casting process
S Naher et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)
The influence of surface structure on wetting of α-Al2O3 by aluminum in a reduced atmosphere
P Shen et al.
ACTA MATERIALIA (2003)
Production of natural and synthesized aluminum-based composite materials with the aid of ultrasonic (cavitation) treatment of the melt
GI Eskin et al.
ULTRASONICS SONOCHEMISTRY (2003)
Coating of Y2O3 additive on Al2O3 powder and its effect on the wetting behaviour in the system Al2O3p/Al
ZQ Yu et al.
MATERIALS LETTERS (2003)
Wettability of zirconium diboride ceramics by Ag, Cu and their alloys with Zr
ML Muolo et al.
SCRIPTA MATERIALIA (2003)
Wettability and interfacial reaction in SiC/Ni plus Ti system
SJ Li et al.
JOURNAL OF MATERIALS SCIENCE (2002)
Particle distribution in cast metal matrix composites - Part II
J Hashim et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2002)
Oxygen induced interfacial phenomena during wetting of alumina by liquid aluminium
G Levi et al.
ACTA MATERIALIA (2002)
The influence of nickel coating on the wettability of aluminum on ceramics
CA Leon et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2002)
Wettability and phase formation in TiC/Al-alloys assemblies
EA Aguilar et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2002)
The wettability of SiC particles by molten aluminium alloy
J Hashim et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2001)
The enhancement of wettability of SiC particles in cast aluminium matrix composites
J Hashim et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2001)
Wetting angle and surface tension of germanium melts on different substrate materials
N Kaiser et al.
JOURNAL OF CRYSTAL GROWTH (2001)
The role of compound formation in reactive wetting: The Cu/SiC system
C Rado et al.
ACTA MATERIALIA (2000)
The wetting and spontaneous infiltration of ceramics by molten copper
AR Kennedy et al.
JOURNAL OF MATERIALS SCIENCE (2000)
Wetting phenomena in the TiC/(Cu-Al) system
N Froumin et al.
ACTA MATERIALIA (2000)
Performance analysis of axial-flow mixing impellers
J Wu et al.
AICHE JOURNAL (2000)