Related references
Note: Only part of the references are listed.Enhancing interfacial performance of epoxy resin composites via in-situ nucleophilic addition polymerization modification of carbon fibers with hyperbranched polyimidazole
Longlong Shi et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2021)
Micro- and Nanocellulose in Polymer Composite Materials: A Review
Abdoulhdi A. Borhana Omran et al.
POLYMERS (2021)
Biomimetic porous polypropylene foams with special wettability properties
Pengke Huang et al.
COMPOSITES PART B-ENGINEERING (2020)
Strong and super thermally insulating in-situ nanofibrillar PLA/PET composite foam fabricated by high-pressure microcellular injection molding
Guilong Wang et al.
CHEMICAL ENGINEERING JOURNAL (2020)
Recent advancements in manufacturing technologies of microcellular polymers: a review
Rupesh Dugad et al.
JOURNAL OF POLYMER RESEARCH (2020)
Enhanced dielectric properties and energy storage density of PVDF nanocomposites by co-loading of BaTiO3 and CoFe2O4 nanoparticles
Qingmin Wang et al.
ADVANCED COMPOSITES AND HYBRID MATERIALS (2020)
The effect of water immersion and fibre content on properties of corn husk fibres reinforced thermoset polyester composite
Nasmi Herlina Sari et al.
POLYMER TESTING (2020)
Establishment of multistage gradient modulus intermediate layer between fiber and matrix via designing double rigid-flexible structure to improve interfacial and mechanical properties of carbon fiber/resin composites
Peifeng Feng et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2020)
Printed hydrogel nanocomposites: fine-tuning nanostructure for anisotropic mechanical and conductive properties
Weiwei Zhao et al.
ADVANCED COMPOSITES AND HYBRID MATERIALS (2020)
Preparation of Microcellular Injection-Molded Foams Using Different Types of Low-Pressure Gases via a New Foam Injection Molding Technology
Long Wang et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2019)
Fabrication of macroporous carbon monoliths with controllable structure via supercritical CO2 foaming of polyacrylonitrile
Jie Gong et al.
JOURNAL OF CO2 UTILIZATION (2019)
High performance and low floating fiber glass fiber-reinforced polypropylene composites realized by a facile coating method
Peiqi Xu et al.
ADVANCED COMPOSITES AND HYBRID MATERIALS (2019)
Lightweight and tough nanocellular PP/PTFE nanocomposite foams with defect-free surfaces obtained using in situ nanofibrillation and nanocellular injection molding
Guilong Wang et al.
CHEMICAL ENGINEERING JOURNAL (2018)
Unusual Fabrication of Lightweight Injection-Molded Polypropylene Foams by Using Air as the Novel Foaming Agent
Long Wang et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2018)
Preparation of open microcellular polylactic acid foams with a microfibrillar additive using coreback foam injection molding processes
Shota Ishihara et al.
JOURNAL OF CELLULAR PLASTICS (2018)
Foaming of polymers with supercritical fluids and perspectives on the current knowledge gaps and challenges
Ernesto Di Maio et al.
JOURNAL OF SUPERCRITICAL FLUIDS (2018)
Evolution of cellular morphologies and crystalline structures in high-expansion isotactic polypropylene/cellulose nanofiber nanocomposite foams
Long Wang et al.
RSC ADVANCES (2018)
Injection-molded microcellular PLA/graphite nanocomposites with dramatically enhanced mechanical and electrical properties for ultra-efficient EMI shielding applications
Guilong Wang et al.
JOURNAL OF MATERIALS CHEMISTRY C (2018)
Ultralow-Threshold and Lightweight Biodegradable Porous PLA/MWCNT with Segregated Conductive Networks for High-Performance Thermal Insulation and Electromagnetic Interference Shielding Applications
Guilong Wang et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
A new microcellular foam injection-molding technology using non-supercritical fluid physical blowing agents
Atsushi Yusa et al.
POLYMER ENGINEERING AND SCIENCE (2017)
In-situ visualization of PLA crystallization and crystal effects on foaming in extrusion
Alireza Tabatabaei et al.
EUROPEAN POLYMER JOURNAL (2017)
Development of a Simplified Foam Injection Molding Technique and Its Application to the Production of High Void Fraction Polypropylene Foams
Long Wang et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2017)
Visualization of polypropylene's strain-induced crystallization under the influence of supercritical CO2 in extrusion
Alireza Tabatabaei et al.
POLYMER (2017)
Fabrication of lightweight microcellular foams in injection-molded polypropylene using the synergy of long-chain branches and crystal nucleating agents
Long Wang et al.
POLYMER (2017)
High thermal insulation and compressive strength polypropylene foams fabricated by high-pressure foam injection molding and mold opening of nano-fibrillar composites
Jinchuan Zhao et al.
MATERIALS & DESIGN (2017)
Effects of hydrophobic-modified cellulose nanofibers (CNFs) on cell morphology and mechanical properties of high void fraction polypropylene nanocomposite foams
Long Wang et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)
Unprecedented Development of Ultrahigh Expansion Injection-Molded Polypropylene Foams by Introducing Hydrophobic-Modified Cellulose Nanofibers
Long Wang et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Fundamental Influences of Induced Crystallization and Phase Separation on the Foaming Behavior of Poly(lactic acid)/Polyethylene Glycol Blends Blown with Compressed CO2
Qian Ren et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2016)
Fabrication of High Expansion Microcellular Injection-Molded Polypropylene Foams by Adding Long-Chain Branches
Long Wang et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2016)
Insights into polymer crystallization and melting from fast scanning chip calorimetry
Akihiko Toda et al.
POLYMER (2016)
Effect of cooling rate on crystal polymorphism in beta-nucleated isotactic polypropylene as revealed by a combined WAXS/FSC analysis
Alicyn Marie Rhoades et al.
POLYMER (2016)
Visualization of polypropylene crystallites formed from a stressed melt in extrusion
Alireza Tabatabaei et al.
POLYMER (2016)
Water-assisted compounding of cellulose nanocrystals into polyamide 6 for use as a nucleating agent for microcellular foaming
Jun Peng et al.
POLYMER (2016)
Crystallization of Polyethylene at Large Undercooling
Evgeny Zhuravlev et al.
ACS MACRO LETTERS (2016)
Poly(lactic acid)-Based in Situ Microfibrillar Composites with Enhanced Crystallization Kinetics, Mechanical Properties, Rheological Behavior, and Foaming Ability
Adel Ramezani Kakroodi et al.
BIOMACROMOLECULES (2015)
The effect of strain-hardening on the morphology and mechanical and dielectric properties of multi-layered PP foam/PP film
Sangjin Lee et al.
POLYMER (2015)
A novel method of producing lightweight microcellular injection molded parts with improved ductility and toughness
Xiaofei Sun et al.
POLYMER (2015)
Characterization of the Structure, Acoustic Property, Thermal Conductivity, and Mechanical Property of Highly Expanded Open-Cell Polycarbonate Foams
Davoud Jahani et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2015)
Superhydrophobic and Oleophilic Open-Cell Foams from Fibrillar Blends of Polypropylene and Polytetrafluoroethylene
Ali Rizvi et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
Polypropylene/carbon nanotube nano/microcellular structures with high dielectric permittivity, low dielectric loss, and low percolation threshold
A. Ameli et al.
CARBON (2014)
Development of high void fraction polylactide composite foams using injection molding: Mechanical and thermal insulation properties
A. Ameli et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2014)
Preparation of Micro/NanoCellular Polypropylene Foam With Crystal Nucleating Agents
Ryoma Miyamoto et al.
POLYMER ENGINEERING AND SCIENCE (2014)
Poly (lactic acid) foaming
Mohammadreza Nofar et al.
PROGRESS IN POLYMER SCIENCE (2014)
Solid State Foaming of Poly(lactic acid) Blown with Compressed CO2: Influences of Long Chain Branching and Induced Crystallization on Foam Expansion and Cell Morphology
Qian Ren et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2013)
In situ fibrillation of CO2-philic polymers: Sustainable route to polymer foams in a continuous process
Ali Rizvi et al.
POLYMER (2013)
Effects of long chain branches on the crystallization and foaming behaviors of polypropylene-g-poly(ethylene-co-1-butene) graft copolymers with well-defined molecular structures
Lu Wang et al.
POLYMER (2012)
Tough Graphene-Polymer Microcellular Foams for Electromagnetic Interference Shielding
Hao-Bin Zhang et al.
ACS APPLIED MATERIALS & INTERFACES (2011)
Broad-band electrical conductivity of carbon nanofibre-reinforced polypropylene foams
Marcelo Antunes et al.
CARBON (2011)
Phase Separation of DMDBS from PP: Effect of Polymer Molecular Weight and Tacticity
K. Sreenivas et al.
MACROMOLECULES (2011)
Cell Structure Evolution and the Crystallization Behavior of Polypropylene/Clay Nanocomposites Foams Blown in Continuous Extrusion
Wentao Zhai et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2010)
Use of Nanoparticles for Improving the Foaming Behaviors of Linear PP
W. G. Zheng et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2010)
Oriented crystallization in polypropylene fibers induced by a sorbitol-based nucleator
Jonathan Lipp et al.
MACROMOLECULES (2008)
Mechanism of strength improvement of foamed plastics having fine cell
Minoru Shimbo et al.
JOURNAL OF CELLULAR PLASTICS (2007)
Fibril formation of 1,3: 2,4-di(3,4-dimethylbenzylidene) sorbitol in a polypropylene melt
Jonathan Lipp et al.
LANGMUIR (2006)
Rheological and electrical properties of polycarbonate/multi-walled carbon nanotube composites
Y. T. Sung et al.
POLYMER (2006)
Rheological and dielectrical characterization of melt mixed polycarbonate-multiwalled carbon nanotube composites
P Pötschke et al.
POLYMER (2004)
Strain hardening in polypropylenes and its role in extrusion foaming
P Spitael et al.
POLYMER ENGINEERING AND SCIENCE (2004)
The binary system isotactic polypropylene/bis(3,4-dimethylbenzylidene)sorbitol: Phase behavior, nucleation, and optical properties
M Kristiansen et al.
MACROMOLECULES (2003)
Foam processing and cellular structure of polypropylene/clay nanocomposites
PH Nam et al.
POLYMER ENGINEERING AND SCIENCE (2002)
Rheological behavior of multiwalled carbon nanotube/polycarbonate composites
P Pötschke et al.
POLYMER (2002)
Biaxial flow-induced alignment of silicate layers in polypropylene/clay nanocomposite foam
M Okamoto et al.
NANO LETTERS (2001)
Share Paper
