Related references
Note: Only part of the references are listed.A Topology Optimization Method for Hybrid Subtractive-Additive Remanufacturing
Jikai Liu et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2020)
Review on direct metal laser deposition manufacturing technology for the Ti-6Al-4V alloy
P. N. Sibisi et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
A new method for assessing the recyclability of powders within Powder Bed Fusion process
Nima E. Gorji et al.
MATERIALS CHARACTERIZATION (2020)
Closed loop supply chain network for local and distributed plastic recycling for 3D printing: a MILP-based optimization approach
Pavlo Santander et al.
RESOURCES CONSERVATION AND RECYCLING (2020)
Friction Stir Processing of Magnesium Alloys: A Review
Wen Wang et al.
ACTA METALLURGICA SINICA-ENGLISH LETTERS (2020)
Characterization of AISI 304L stainless steel powder recycled in the laser powder-bed fusion process
Austin T. Sutton et al.
ADDITIVE MANUFACTURING (2020)
Material Reuse in Laser Powder Bed Fusion: Side Effects of the Laser-Metal Powder Interaction
Eleonora Santecchia et al.
METALS (2020)
Characterisation of 17-4PH metallic powder recycling to optimise the performance of the selective laser melting process
Pablo Zapico et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Study of powder recycling and its effect on printed parts during laser powder-bed fusion of 17-4 PH stainless steel
Farid Ahmed et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)
Cellular, Mineralized, and Programmable Cellulose Composites Fabricated by 3D Printing of Aqueous Pastes Derived from Paper Wastes and Microfibrillated Cellulose
Benjamin Stolz et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2020)
Plastic recycling in additive manufacturing: A systematic literature review and opportunities for the circular economy
Fabio A. Cruz Sanchez et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Technical pathways for distributed recycling of polymer composites for distributed manufacturing: Windshield wiper blades
Samantha C. Dertinger et al.
RESOURCES CONSERVATION AND RECYCLING (2020)
Processing techniques of polymeric materials and their reinforced composites
Ranvijay Kumar et al.
ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES (2020)
Utilization of recycled glass for 3D concrete printing: rheological and mechanical properties
Guan Heng Andrew Ting et al.
JOURNAL OF MATERIAL CYCLES AND WASTE MANAGEMENT (2019)
New Poly(lactide-urethane-isocyanurate) Foams Based on Bio-Polylactide Waste
Joanna Paciorek-Sadowska et al.
POLYMERS (2019)
3D Printing of Ground Tire Rubber Composites
Faez Alkadi et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2019)
Recycling of additively printed rare-earth bonded magnets
Kinjal Gandha et al.
WASTE MANAGEMENT (2019)
Mechanical Properties and Applications of Recycled Polycarbonate Particle Material Extrusion-Based Additive Manufacturing
Matthew J. Reich et al.
MATERIALS (2019)
Additive Manufacturing with Liquid Latex and Recycled End-of-Life Rubber
Miguel A. Quetzeri-Santiago et al.
3D PRINTING AND ADDITIVE MANUFACTURING (2019)
Exploring the potential of additive manufacturing for product design in a circular economy
Marita Sauerwein et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Effect of Powder Recycling in Electron Beam Melting on the Surface Chemistry of Alloy 718 Powder
Hans Gruber et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2019)
Selective laser sintering and multi jet fusion: Process-induced modification of the raw materials and analyses of parts performance
Francesco Sillani et al.
ADDITIVE MANUFACTURING (2019)
Investigation of Closed-Loop Manufacturing with Acrylonitrile Butadiene Styrene over Multiple Generations Using Additive Manufacturing
Mazher Iqbal Mohammed et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)
Sustainable Production in a Circular Economy: A Business Model for Re-Distributed Manufacturing
Chris Turner et al.
SUSTAINABILITY (2019)
Application of Directed Energy Deposition-Based Additive Manufacturing in Repair
Abdollah Saboori et al.
APPLIED SCIENCES-BASEL (2019)
The re-usability of heat-exposed poly (ethylene terephthalate) powder for laser sintering
Hao Gu et al.
ADDITIVE MANUFACTURING (2019)
Recycling of fiberglass wind turbine blades into reinforced filaments for use in Additive Manufacturing
Amirmohammad Rahimizadeh et al.
COMPOSITES PART B-ENGINEERING (2019)
A Deep Look at Metal Additive Manufacturing Recycling and Use Tools for Sustainability Performance
Ana E. Oros Daraban et al.
SUSTAINABILITY (2019)
Additive Manufacturing for Repair and Restoration in Remanufacturing: An Overview from Object Design and Systems Perspectives
Rahito et al.
PROCESSES (2019)
On the additive manufacturing of an energy storage device from recycled material
Rupinder Singh et al.
COMPOSITES PART B-ENGINEERING (2019)
Evaluation of cement paste containing recycled stainless steel powder for sustainable additive manufacturing
Bharath Melugiri-Shankaramurthy et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Revealing the Effects of Powder Reuse for Selective Laser Melting by Powder Characterization
Laura Cordova et al.
JOM (2019)
Development and Evaluation of a Distributed Recycling System for Making Filaments Reused in Three-Dimensional Printers
Dongoh Lee et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2019)
A barrier analysis for distributed recycling of 3D printing waste: Taking the maker movement perspective
Bob Peeters et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Exploring Industry 4.0 technologies to enable circular economy practices in a manufacturing context A business model proposal
Daniel Luiz Mattos Nascimento et al.
JOURNAL OF MANUFACTURING TECHNOLOGY MANAGEMENT (2019)
A comparison between mechanical properties of specimens 3D printed with virgin and recycled PLA
Antonio Lanzotti et al.
12TH CIRP CONFERENCE ON INTELLIGENT COMPUTATION IN MANUFACTURING ENGINEERING (2019)
Recycled polypropylene blends as novel 3D printing materials
Nicole E. Zander et al.
ADDITIVE MANUFACTURING (2019)
Evolution of 316L stainless steel feedstock due to laser powder bed fusion process
Michael J. Heiden et al.
ADDITIVE MANUFACTURING (2019)
Materials Selection of 3D Printing Filament and Utilization of Recycled Polyethylene Terephthalate (PET) in a Redesigned Breadboard
Mark Keanu James E. Exconde et al.
29TH CIRP DESIGN CONFERENCE 2019 (2019)
Rheological properties of two stainless steel 316L powders for additive manufacturing
Haijun Gong et al.
6TH INTERNATIONAL CONFERENCE ON MECHANICAL, MATERIALS AND MANUFACTURING (2019)
Development and characterisation of 3D printing finishing process applying recycled plastic waste
Marlon Wesley Machado Cunico et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2019)
Recyclability of stainless steel (316 L) powder within the additive manufacturing process
Nima E. Gorji et al.
MATERIALIA (2019)
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Tuan D. Ngo et al.
COMPOSITES PART B-ENGINEERING (2018)
Progress in electrochemical flow reactors for laboratory and pilot scale processing
Frank C. Walsh et al.
ELECTROCHIMICA ACTA (2018)
Effects of Reusing Ti-6Al-4V Powder in a Selective Laser Melting Additive System Operated in an Industrial Setting
Oscar A. Quintana et al.
JOM (2018)
Closed-loop recycling of polyamide12 powder from selective laser sintering into sustainable composites
Lu Wang et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Close-looped recycling of polylactic acid used in 3D printing: An experimental investigation and life cycle assessment
Peng Zhao et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Additive manufacturing: scientific and technological challenges, market uptake and opportunities
Syed A. M. Tofail et al.
MATERIALS TODAY (2018)
Recent advances in sulfonated resin catalysts for efficient biodiesel and bio-derived additives production
Valeria Trombettoni et al.
PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2018)
Tightening the loop on the circular economy: Coupled distributed recycling and manufacturing with recyclebot and RepRap 3-D printing
Shan Zhong et al.
RESOURCES CONSERVATION AND RECYCLING (2018)
Reprocessable thermosets for sustainable three-dimensional printing
Biao Zhang et al.
NATURE COMMUNICATIONS (2018)
Recycled Sm-Co bonded magnet filaments for 3D printing of magnets
Helena A. Khazdozian et al.
AIP ADVANCES (2018)
The expected contribution of Industry 4.0 technologies for industrial performance
Lucas Santos Dalenogare et al.
INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS (2018)
Fused Particle Fabrication 3-D Printing: Recycled Materials' Optimization and Mechanical Properties
Aubrey L. Woern et al.
MATERIALS (2018)
Polyurethane Foams: Past, Present, and Future
Nuno V. Gama et al.
MATERIALS (2018)
Three-Dimensional-Printed Sustainable Biochar-Recycled PET Composites
Mohanad Idrees et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2018)
Transformation of E-Waste Plastics into Sustainable Filaments for 3D Printing
Vaibhav Gaikwad et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2018)
Environment-friendly and reusable ink for 3D printing of metallic structures
Chao Xu et al.
MATERIALS & DESIGN (2018)
Secondary use of ABS co-polymer recyclates for the manufacture of structural elements using the FFF technology
Piotr Czyzewski et al.
RAPID PROTOTYPING JOURNAL (2018)
Policies and Motivations for the CO2 Valorization through the Sabatier Reaction Using Structured Catalysts. A Review of the Most Recent Advances
Juan C. Navarro et al.
CATALYSTS (2018)
Characterization of Polystyrene Wastes as Potential Extruded Feedstock Filament for 3D Printing
Irina Turku et al.
RECYCLING (2018)
Recycling of polymer waste with SiC/Al2O3 reinforcement for rapid tooling applications
Narinder Singh et al.
MATERIALS TODAY COMMUNICATIONS (2018)
Local and recyclable materials for additive manufacturing: 3D printing with mussel shells
M. Sauerwein et al.
MATERIALS TODAY COMMUNICATIONS (2018)
Roadmap to sustainable plastic additive manufacturing
Sanjay Kumar et al.
MATERIALS TODAY COMMUNICATIONS (2018)
Sustainability of additive manufacturing: An overview on its energy demand and environmental impact
Tao Peng et al.
ADDITIVE MANUFACTURING (2018)
The effect of powder recycling on the mechanical properties and microstructure of electron beam melted Ti-6Al-4 V specimens
Vladimir V. Popov et al.
ADDITIVE MANUFACTURING (2018)
A Technical Assessment of Product/Component Re-manufacturability for Additive Remanufacturing
Yahya Lahrour et al.
25TH CIRP LIFE CYCLE ENGINEERING (LCE) CONFERENCE (2018)
Feasibility study on additive manufacturing of recyclable objects for space applications
Miranda Fateri et al.
ADDITIVE MANUFACTURING (2018)
Impact of Industrialization on Environment and Sustainable Solutions - Reflections from a South Indian Region
Rasmi Patnaik
2017 5TH INTERNATIONAL CONFERENCE ON ENVIRONMENT POLLUTION AND PREVENTION (ICEPP 2017) (2018)
Recycling meal-ready-to-eat (MRE) pouches into polymer filament for material extrusion additive manufacturing
Kevin R. Hart et al.
ADDITIVE MANUFACTURING (2018)
Recycled polyethylene terephthalate as a new FFF feedstock material
Nicole E. Zander et al.
ADDITIVE MANUFACTURING (2018)
Physical Characterization and Pre-assessment of Recycled High-Density Polyethylene as 3D Printing Material
Siewhui Chong et al.
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2017)
Parameter optimization and experimental study of the sprocket repairing using laser cladding
Huaming Liu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Development of filaments using selective laser sintering waste powder
Sanjay Kumar et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Recycling and remanufacturing of 3D printed continuous carbon fiber reinforced PLA composites
Xiaoyong Tian et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Towards zero waste manufacturing: A multidisciplinary review
Sunpreet Singh et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Comparative Energy, Resource and Recycling Lifecycle Analysis of the Industrial Repair Process of Gas Turbine Burners Using Conventional Machining and Additive Manufacturing
Frank Walachowicz et al.
JOURNAL OF INDUSTRIAL ECOLOGY (2017)
Mechanical Properties of Specimens 3D Printed with Virgin and Recycled Polylactic Acid
Isabelle Anderson
3D PRINTING AND ADDITIVE MANUFACTURING (2017)
Experiencing closed loop manufacturing in a learning environment
Max Juraschek et al.
7TH CONFERENCE ON LEARNING FACTORIES (CLF 2017) (2017)
An overview of powder granulometry on feedstock and part performance in the selective laser melting process
Jun Hao Tan et al.
ADDITIVE MANUFACTURING (2017)
Polymer recycling in an open-source additive manufacturing context: Mechanical issues
Fabio A. Cruz Sanchez et al.
ADDITIVE MANUFACTURING (2017)
An additive manufacturing solution to produce big green parts from tires and recycled plastics
J. Domingues et al.
INTERNATIONAL CONFERENCE ON SUSTAINABLE AND INTELLIGENT MANUFACTURING (RESIM 2016) (2017)
Paper-based chemical and biological sensors: Engineering aspects
Snober Ahmed et al.
BIOSENSORS & BIOELECTRONICS (2016)
Investigation for dimensional accuracy of AMC prepared by FDM assisted investment casting using nylon-6 waste based reinforced filament
Rupinder Singh et al.
MEASUREMENT (2016)
The role of laser additive manufacturing methods of metals in repair, refurbishment and remanufacturing - enabling circular economy
Maija Leino et al.
LASER ASSISTED NET SHAPE ENGINEERING 9 INTERNATIONAL CONFERENCE ON PHOTONIC TECHNOLOGIES PROCEEDINGS OF THE LANE 2016 (2016)
Reverse logistics and closed-loop supply chain: A comprehensive review to explore the future
Kannan Govindan et al.
EUROPEAN JOURNAL OF OPERATIONAL RESEARCH (2015)
Life cycle analysis of distributed recycling of post-consumer high density polyethylene for 3-D printing filament
M. A. Kreiger et al.
JOURNAL OF CLEANER PRODUCTION (2014)
Advanced Shape Memory Technology to Reshape Product Design, Manufacturing and Recycling
Wen Guang Yang et al.
POLYMERS (2014)
Circular Economy: Questions for Responsible Minerals, Additive Manufacturing and Recycling of Metals
Damien Giurco et al.
RESOURCES-BASEL (2014)
Energy for economic growth, industrialization, environment and natural resources: Living with just enough
Syeda Rabab Mudakkar et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2013)
Additive manufacturing: technology, applications and research needs
Nannan Guo et al.
FRONTIERS OF MECHANICAL ENGINEERING (2013)
THE CONSEQUENCES OF INDUSTRIALIZATION: EVIDENCE FROM WATER POLLUTION AND DIGESTIVE CANCERS IN CHINA
Avraham Ebenstein
REVIEW OF ECONOMICS AND STATISTICS (2012)
Effects of urbanization and industrialization on agricultural land use in Shandong Peninsula of China
Qingshui Lu et al.
ECOLOGICAL INDICATORS (2011)
The PRISMA statement for reporting systematic reviews and meta-analyses of studies that evaluate health care interventions: explanation and elaboration
Alessandro Liberati et al.
JOURNAL OF CLINICAL EPIDEMIOLOGY (2009)
A typology of reviews: an analysis of 14 review types and associated methodologies
Maria J. Grant et al.
HEALTH INFORMATION AND LIBRARIES JOURNAL (2009)
Share Paper
