☆ 4.1 Article

Thermal and Mechanical Properties of Vinyl Ester Hybrid Composites with Carbon Black and Glass Reinforcement

ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2021)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

Determination of Non-Recrystallization Temperature for Niobium Microalloyed Steel

Mohammad Nishat Akhtar et al.

Summary: The study identified the non-recrystallization temperature (T-NR) of niobium-microalloyed steel to plan rolling schedules, showing that T-NR is influenced by alloying elements and deformation parameters, determined through multiple-hit deformation tests.

MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Influence of the Fly Ash Material Inoculants on the Tensile and Impact Characteristics of the Aluminum AA 5083/7.5SiC Composites

Santhosh Nagaraja et al.

Summary: This study aims to explore the appropriate composition and particle size of fly ash for grain refinement of aluminum composites, enhancing their tensile and impact strength. The research found that fly ash as a material inoculant significantly increases the strength of the composites, but beyond 2% content, it leads to a decrease in tensile and impact characteristics.

MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Synthesis and Characterization of Mechanical Properties and Wire Cut EDM Process Parameters Analysis in AZ61 Magnesium Alloy + B4C + SiC

Thanikodi Sathish et al.

Summary: This study utilized WCEDM process to machine magnesium alloy with reinforcements, and specimens were prepared through stir casting technique. An orthogonal array was used to investigate the effects of WCEDM process parameters on material removal rate and surface roughness.

MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Microstructure, Mechanical Properties, and Corrosion Behavior of Boron Carbide Reinforced Aluminum Alloy (Al-Fe-Si-Zn-Cu) Matrix Composites Produced via Powder Metallurgy Route

M. Meignanamoorthy et al.

Summary: In this study, AA8079 matrix composites with varying weight percentages of B4C were synthesized using powder metallurgy. The impact of sintering parameters on the properties of the composites was investigated, with higher sintering temperatures and pressures leading to improved density, hardness, compressive strength, and corrosion resistance. Characterization techniques such as XRD, EDAX, and SEM confirmed the uniform dispersion of B4C reinforcement within the AA8079 matrix.

MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Multi Ceramic Particles Inclusion in the Aluminium Matrix and Wear Characterization through Experimental and Response Surface-Artificial Neural Networks

Ballupete Nagaraju Sharath et al.

Summary: The research incorporated ceramics such as Gr and B4C into the manufacturing of AMMCs through stir casting, showing that the reinforced matrix was harder and had improved wear resistance. The microstructure and worn surface observed through SEM revealed the formation of mechanically mixed layers of B4C and Gr, which effectively protected the sample surface from wear. A response surface analysis and neural network methodology were utilized to optimize weight loss and identify wear parameters' significance.

MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Experimental Investigation of the Friction Stir Weldability of AA8006 with Zirconia Particle Reinforcement and Optimized Process Parameters

Thanikodi Sathish et al.

Summary: The study aims to reduce the welding cost of the Aluminium 8006 alloy while maintaining joint quality through friction stir welding. By utilizing zirconia as a reinforcement agent, the performance of the AA8006 alloy in FSW is improved. Through experimental trials, optimal process parameters are identified to enhance the quality of the weld.

MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Investigation of Mechanical and Physical Properties of Big Sheep Horn as an Alternative Biomaterial for Structural Applications

Tajammul Hussain M. Mysore et al.

Summary: This study investigates the physical and mechanical properties of bighorns of Deccani breed sheep native from Karnataka, India. The results suggest that the mechanical properties of the horn are significantly affected by the presence of water content, showing anisotropy and depending more on water content than coupon orientation. Wet conditioned specimens exhibited a significant loss in mechanical properties compared to dry specimens.

MATERIALS (2021)

Add to Collection

Review Materials Science, Coatings & Films

Contemporary applications of carbon black-filled polymer composites: An overview of essential aspects

Ayesha Kausar

JOURNAL OF PLASTIC FILM & SHEETING (2018)

Add to Collection

Proceedings Paper Engineering, Manufacturing

Experimental and numerical investigation of mode II failure behavior evaluation using three point bend, end notched flexure test

R. Nikhil et al.

INTERNATIONAL CONFERENCE ON RESEARCH IN MECHANICAL ENGINEERING SCIENCES (RIMES 2017) (2018)

Add to Collection

Article Materials Science, Coatings & Films

Shape memory properties of electrically conductive multi-walled carbon nanotube-filled polyurethane/modified polystyrene blends

Naveed Ahmed et al.

JOURNAL OF PLASTIC FILM & SHEETING (2016)

Add to Collection

Article Physics, Applied

A comparison between physical properties of carbon black-polymer and carbon nanotubes-polymer composites

B. J. -P. Adohi et al.

JOURNAL OF APPLIED PHYSICS (2010)

Add to Collection

Article Automation & Control Systems

Experimental analysis on tensile properties of FRP with nano clay

S. Sundaram et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2008)

Add to Collection

Article Mechanics

Mechanical properties of epoxy-based composites using nanoclays

Man-Wai Ho et al.

COMPOSITE STRUCTURES (2006)

Add to Collection

Article Materials Science, Composites

Epoxy-layered silicate nanocomposites as matrix in glass fibre-reinforced composites

X Kornmann et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2005)

Add to Collection

Article Materials Science, Composites

S2-glass/epoxy polymer nanocomposites: Manufacturing, structures, thermal and mechanical properties

A Haque et al.

JOURNAL OF COMPOSITE MATERIALS (2003)

Add to Collection

© Peeref 2019-2024. All rights reserved.