Related references
Note: Only part of the references are listed.Advances in statistical mechanics of rock masses and its engineering applications
Faquan Wu et al.
JOURNAL OF ROCK MECHANICS AND GEOTECHNICAL ENGINEERING (2021)
A review of the methods to incorporate the geological and geotechnical characteristics of rock masses in blastability assessments for selective blast design
Ebrahim F. Salmi et al.
ENGINEERING GEOLOGY (2021)
A state-of-the-art review of automated extraction of rock mass discontinuity characteristics using three-dimensional surface models
Rushikesh Battulwar et al.
JOURNAL OF ROCK MECHANICS AND GEOTECHNICAL ENGINEERING (2021)
Development and application of UAV-SfM photogrammetry for quantitative characterization of rock mass discontinuities
Deheng Kong et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2021)
Reconstruction of Surficial Rock Blocks by Means of Rock Structure Modelling of 3D TLS Point Clouds: The 2013 Long-Chang Rockfall
Xiujun Dong et al.
ROCK MECHANICS AND ROCK ENGINEERING (2020)
Analysis of Rockfalls by Means of a Fractal Fragmentation Model
R. Ruiz-Carulla et al.
ROCK MECHANICS AND ROCK ENGINEERING (2020)
Applying photogrammetry and semi-automated joint mapping for rock mass characterization
A. Buyer et al.
ENGINEERING GEOLOGY (2020)
Automatic identification and characterization of discontinuities in rock masses from 3D point clouds
Deheng Kong et al.
ENGINEERING GEOLOGY (2020)
Evaluation of Maximum Rockfall Dimensions Based on Probabilistic Assessment of the Penetration of the Sliding Planes into the Slope
O. Mavrouli et al.
ROCK MECHANICS AND ROCK ENGINEERING (2020)
The use of unmanned aerial vehicles (UAVs) for engineering geology applications
Daniele Giordan et al.
BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT (2020)
Assessment of block size distribution in fractured rock mass and its influence on rock mass mechanical behavior
Wenli Yao et al.
AIP ADVANCES (2020)
Fracture Frequency and Block Volume Distribution in Rock Masses
Maria Stavropoulou et al.
ROCK MECHANICS AND ROCK ENGINEERING (2020)
Fragmented Rockfall Volume Distribution from Photogrammetry-Based Structural Mapping and Discrete Fracture Networks
Renato Macciotta et al.
APPLIED SCIENCES-BASEL (2020)
UnBlocksgen: A Python library for 3D rock mass generation and analysis
Leandro Lima Rasmussen
SOFTWAREX (2020)
In Situ Block Size Distribution Aimed at the Choice of the Design Block for Rockfall Barriers Design: A Case Study along Gardesana Road
Gessica Umili et al.
GEOSCIENCES (2020)
Discontinuity modelling and rock block geometry identification to optimize production in dimension stone quarries
Reza Yarahmadi et al.
ENGINEERING GEOLOGY (2018)
Challenges in the characterisation of intact rock bridges in rock slopes
Davide Elmo et al.
ENGINEERING GEOLOGY (2018)
3DmFV: Three-Dimensional Point Cloud Classification in Real-Time Using Convolutional Neural Networks
Yizhak Ben-Shabat et al.
IEEE ROBOTICS AND AUTOMATION LETTERS (2018)
Use of a remotely piloted aircraft system for hazard assessment in a rocky mining area (Lucca, Italy)
Riccardo Salvini et al.
NATURAL HAZARDS AND EARTH SYSTEM SCIENCES (2018)
A fractal fragmentation model for rockfalls
Roger Ruiz-Carulla et al.
LANDSLIDES (2017)
Comparing rockfall scar volumes and kinematically detachable rock masses
Olga Mavrouli et al.
ENGINEERING GEOLOGY (2017)
Automatic extraction of blocks from 3D point clouds of fractured rock
Na Chen et al.
COMPUTERS & GEOSCIENCES (2017)
DBSCAN Revisited, Revisited: Why and How You Should (Still) Use DBSCAN
Erich Schubert et al.
ACM TRANSACTIONS ON DATABASE SYSTEMS (2017)
Empirical Assessment of the Mean Block Volume of Rock Masses Intersected by Four Joint Sets
Gian Luca Morelli
ROCK MECHANICS AND ROCK ENGINEERING (2016)
A new method for automated discontinuity trace mapping on rock mass 3D surface model
Xiaojun Li et al.
COMPUTERS & GEOSCIENCES (2016)
Density-ratio based clustering for discovering clusters with varying densities
Ye Zhu et al.
PATTERN RECOGNITION (2016)
Size Distribution for Potentially Unstable Rock Masses and In Situ Rock Blocks Using LIDAR-Generated Digital Elevation Models
O. Mavrouli et al.
ROCK MECHANICS AND ROCK ENGINEERING (2015)
Estimation of rock block size distribution for determination of Geological Strength Index (GSI) using discrete fracture networks (DFNs)
B. -H. Kim et al.
TRANSACTIONS OF THE INSTITUTIONS OF MINING AND METALLURGY SECTION A-MINING TECHNOLOGY (2015)
A new approach for semi-automatic rock mass joints recognition from 3D point clouds
Adrian J. Riquelme et al.
COMPUTERS & GEOSCIENCES (2014)
Terrestrial laser scanning of rock slope instabilities
Antonio Abellan et al.
EARTH SURFACE PROCESSES AND LANDFORMS (2014)
Discontinuity frequency and block volume distribution in rock masses
M. Stavropoulou
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2014)
Integration of three-dimensional laser scanning with discontinuum modelling for stability analysis of tunnels in blocky rockmasses
Stephanie Fekete et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2013)
'Structure-from-Motion' photogrammetry: A low-cost, effective tool for geoscience applications
M. J. Westoby et al.
GEOMORPHOLOGY (2012)
A Method to Estimate In Situ Block Size Distribution
M. K. Elmouttie et al.
ROCK MECHANICS AND ROCK ENGINEERING (2012)
Rockfall hazard and risk assessment: an example from a high promontory at the historical site of Monemvasia, Greece
H. Saroglou et al.
NATURAL HAZARDS AND EARTH SYSTEM SCIENCES (2012)
Terrestrial remote sensing-based estimation of mean trace length, trace intensity and block size/shape
M. Sturzenegger et al.
ENGINEERING GEOLOGY (2011)
Semi-automatic extraction of rock mass structural data from high resolution LIDAR point clouds
Giovanni Gigli et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2011)
Structural analysis of Turtle Mountain (Alberta) using digital elevation model: Toward a progressive failure
Michel Jaboyedoff et al.
GEOMORPHOLOGY (2009)
Optimization of LiDAR scanning and processing for automated structural evaluation of discontinuities in rockmasses
Matt Lato et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2009)
Estimation of block sizes for rock masses with non-persistent joints
B. H. Kim et al.
ROCK MECHANICS AND ROCK ENGINEERING (2007)
Application of a long-range Terrestrial Laser Scanner to a detailed rockfall study at Vall de Nuria (Eastern Pyrenees, Spain)
A. Abellan et al.
ENGINEERING GEOLOGY (2006)
Characterizing block geometry in jointed rockmasses
Katherine S. Kalenchuk et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2006)
Prediction of in-situ block size distributions with reference to armourstone for breakwaters
John-Paul Latham et al.
ENGINEERING GEOLOGY (2006)
Measurements of and correlations between block size and rock quality designation (RQD)
A Palmstrom
TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2005)
Estimation of rock mass deformation modulus and strength of jointed hard rock masses using the GSI system
M Cai et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2004)
Determination of the in situ block size distribution in fractured rock, an approach for comparing in-situ rock with rock sieve analysis
M Jern
ROCK MECHANICS AND ROCK ENGINEERING (2004)
The deformation modulus of rock masses -: comparisons between in situ tests and indirect estimates
A Palmström et al.
TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2001)
Share Paper
