Related references
Note: Only part of the references are listed.Direct Ink Writing of Mineral Materials: A review
Liang Hao et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2021)
BIM-enabled computerized design and digital fabrication of industrialized buildings: A case study
Rui He et al.
JOURNAL OF CLEANER PRODUCTION (2021)
Material Extrusion Additive Manufacturing of Metal Powder-Based Inks Enabled by Carrageenan Rheology Modifier
Robert Cody Pack et al.
ADVANCED ENGINEERING MATERIALS (2021)
Global research on carbon footprint: A scientometric review
Shaoqing Shi et al.
ENVIRONMENTAL IMPACT ASSESSMENT REVIEW (2021)
Vat photopolymerization 3D printing for advanced drug delivery and medical device applications
Xiaoyan Xu et al.
JOURNAL OF CONTROLLED RELEASE (2021)
Mechanical and dielectric properties of direct ink writing Si2N2O composites
Haize Jin et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)
Direct ink writing of TiC-316L metal matrix composites with an epoxy resin-absolute ethanol system
Tao Lin et al.
RARE METALS (2021)
Linking thermoset ink rheology to the stability of 3D-printed structures
Stian K. Romberg et al.
ADDITIVE MANUFACTURING (2021)
Dual 3D printing for vascularized bone tissue regeneration
Sung Yun Hann et al.
ACTA BIOMATERIALIA (2021)
3D and 4D printing in dentistry and maxillofacial surgery: Printing techniques, materials, and applications
Danial Khorsandi et al.
ACTA BIOMATERIALIA (2021)
3D bioprinting of mechanically tuned bioinks derived from cardiac decellularized extracellular matrix
Yu Jung Shin et al.
ACTA BIOMATERIALIA (2021)
Polyphenol-Induced Adhesive Liquid Metal Inks for Substrate-Independent Direct Pen Writing
Md Arifur Rahim et al.
ADVANCED FUNCTIONAL MATERIALS (2021)
Direct Ink Writing of Li1.3Al0.3Ti1.7(PO4)3-Based Solid-State Electrolytes with Customized Shapes and Remarkable Electrochemical Behaviors
Zixian Liu et al.
SMALL (2021)
Fabrication of Drug-Eluting Nano-Hydroxylapatite Filled Polycaprolactone Nanocomposites Using Solution-Extrusion 3D Printing Technique
Pang-Yun Chou et al.
POLYMERS (2021)
3D-printed nanoporous ceramics: Tunable feedstock for direct ink write and projection microstereolithography
Alyssa L. Troksa et al.
MATERIALS & DESIGN (2021)
Viscoelastic and high strain rate response of anisotropic graphene-polymer nanocomposites fabricated with stereolithographic 3D printing
Chang Quan Lai et al.
ADDITIVE MANUFACTURING (2021)
Roles of artificial intelligence in construction engineering and management: A critical review and future trends
Yue Pan et al.
AUTOMATION IN CONSTRUCTION (2021)
Predication of the in-plane mechanical properties of continuous carbon fibre reinforced 3D printed polymer composites using classical laminated-plate theory
Khalid Saeed et al.
COMPOSITE STRUCTURES (2021)
Different-structured nanoclays incorporated composites: Computational and experimental analysis on mechanical properties
Zixuan Chen et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2021)
3D printing restorative materials using a stereolithographic technique: a systematic review
Alvaro Della Bona et al.
DENTAL MATERIALS (2021)
Design Approach for Additive Manufacturing in Spare Part Supply Chains
Filipe Marinho de Brito et al.
IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS (2021)
Parameters Characterization of Dielectric Materials Samples in Microwave and Millimeter-Wave Bands
Mario Perez-Escribano et al.
IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES (2021)
Microfluidics for nanomedicines manufacturing: An affordable and low-cost 3D printing approach
Mattia Tiboni et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2021)
Critical evaluation of construction and demolition waste and associated environmental impacts: A scientometric analysis
Kunyang Chen et al.
JOURNAL OF CLEANER PRODUCTION (2021)
Micro-electromechanical systems-based technologies for leak detection and localization in water supply networks: A bibliometric and systematic review
Salman Tariq et al.
JOURNAL OF CLEANER PRODUCTION (2021)
Improved inkjet printability of dye-based inks through enhancing the interaction of dye molecules and polymer nanospheres
Yawei Song et al.
JOURNAL OF MOLECULAR LIQUIDS (2021)
Hierarchically porous alumina catalyst carrier with biomimetic vein structure prepared by direct ink writing
Cunbao Huo et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)
Additive manufacturing of advanced ceramic materials
Y. Lakhdar et al.
PROGRESS IN MATERIALS SCIENCE (2021)
Evaluation of the geometrical discontinuity effect on mixed-mode I/II fracture load of FDM 3D-printed parts
B. Ameri et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2021)
Bonding widths of Deposited Polymer Strands in Additive Manufacturing
Cheng Luo et al.
MATERIALS (2021)
Evaluation of Biodegradable PVA-Based 3D Printed Carriers during Dissolution
Balint Basa et al.
MATERIALS (2021)
Development, characterization, and applications of multi-material stereolithography bioprinting
Bagrat Grigoryan et al.
SCIENTIFIC REPORTS (2021)
Additive Manufacturing of Polymer Materials: Progress, Promise and Challenges
Saad Saleh Alghamdi et al.
POLYMERS (2021)
A Review of Vat Photopolymerization Technology: Materials, Applications, Challenges, and Future Trends of 3D Printing
Marek Pagac et al.
POLYMERS (2021)
A Scientometric Review of Research Status on Unfrozen Soil Water
Shuna Feng et al.
WATER (2021)
Silicone/epoxy hybrid resins with tunable mechanical and interfacial properties for additive manufacture of soft robots
Vincent Sebastian Joseph et al.
APPLIED MATERIALS TODAY (2021)
Densification, microstructure, and mechanical properties of heat-treated MAR-M247 fabricated by Binder Jetting
T. Dahmen et al.
ADDITIVE MANUFACTURING (2021)
Direct-ink writing of strong and biocompatible titanium scaffolds with bimodal interconnected porosity
M. Coffigniez et al.
ADDITIVE MANUFACTURING (2021)
In situ monitoring for fused filament fabrication process: A review
Yanzhou Fu et al.
ADDITIVE MANUFACTURING (2021)
A parametric modelling strategy for the numerical simulation of 3D concrete printing with complex geometries
Ticho Ooms et al.
ADDITIVE MANUFACTURING (2021)
Direct Ink Writing of Moldable Electrochemical Energy Storage Devices: Ongoing Progress, Challenges, and Prospects
Quanhai Zhang et al.
ADVANCED ENGINEERING MATERIALS (2021)
Silicon carbide whiskers reinforced SiOC ceramics through digital light processing 3D printing technology
Jinhua Yang et al.
CERAMICS INTERNATIONAL (2021)
Mechanical properties for long fibre reinforced fused deposition manufactured composites
Jorge Guillermo Diaz-Rodriguez et al.
COMPOSITES PART B-ENGINEERING (2021)
Development of microcellular thermoplastic polyurethane honeycombs with tailored elasticity and energy absorption via CO2 foaming
Bin Hu et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)
Ex Vivo and In Vivo Analyses of Novel 3D-Printed Bone Substitute Scaffolds Incorporating Biphasic Calcium Phosphate Granules for Bone Regeneration
Franciska Oberdiek et al.
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2021)
Singularity analysis of cracks in hybrid CNT reinforced carbon fiber composites using finite element asymptotic expansion and XFEM
S. Hamed Ebrahimi
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2021)
Direct generation of 3D structures by laser polymer deposition
Magnus Thiele et al.
JOURNAL OF LASER APPLICATIONS (2021)
Influence of random and designed porosities on 3D printed tricalcium phosphate-bioactive glass scaffolds
Susmita Bose et al.
ADDITIVE MANUFACTURING (2021)
Integrating digital light processing with direct ink writing for hybrid 3D printing of functional structures and devices
Xirui Peng et al.
ADDITIVE MANUFACTURING (2021)
Designing 3D printable polypropylene: Material and process optimisation through rheology
M. Bertolino et al.
ADDITIVE MANUFACTURING (2021)
An investigation to study the combined effect of different infill pattern and infill density on the impact strength of 3D printed polylactic acid parts
Pradeep Kumar Mishra et al.
COMPOSITES COMMUNICATIONS (2021)
Conductive 3D printed PLA composites: On the interplay of mechanical, electrical and thermal behaviours
I Tirado-Garcia et al.
COMPOSITE STRUCTURES (2021)
Emb e dde d direct ink writing of freeform ceramic components
Kai Huang et al.
APPLIED MATERIALS TODAY (2021)
Additive manufacturing (3D printing) for analytical chemistry
Harsshit Agrawaal et al.
TALANTA OPEN (2021)
State of the art direct ink writing (DIW) and experimental trial on DIW of HAp bio-ceramics
A. J. Ashwin et al.
MATERIALS TODAY-PROCEEDINGS (2021)
Trends and developments in oral health literacy: a scientometric research study (1991-2020)
Yue Sun et al.
BDJ OPEN (2021)
Direct ink writing of recyclable and in situ repairable photothermal polyurethane for sustainable 3D printing development
Mingyue Zheng et al.
JOURNAL OF MATERIALS CHEMISTRY A (2021)
Effect of printing temperature on microstructure, thermal behavior and tensile properties of 3D printed nylon using fused deposition modeling
Sofiane Guessasma et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2021)
An update on applications of 3D printing technologies used for processing polymers used in implant dentistry
Marta Revilla-Leon et al.
ODONTOLOGY (2020)
A review of fabrication polymer scaffolds for biomedical applications using additive manufacturing techniques
Patrycja Szymczyk-Ziolkowska et al.
BIOCYBERNETICS AND BIOMEDICAL ENGINEERING (2020)
The impact on the mechanical properties of multi-material polymers fabricated with a single mixing nozzle and multi-nozzle systems via fused deposition modeling
David Baca et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
Development of Propellant Compositions for Vat Photopolymerization Additive Manufacturing
Michiel H. Straathof et al.
PROPELLANTS EXPLOSIVES PYROTECHNICS (2020)
Cryopolymerization enables anisotropic polyaniline hybrid hydrogels with superelasticity and highly deformation-tolerant electrochemical energy storage
Le Li et al.
NATURE COMMUNICATIONS (2020)
Integrated laser-based powder bed fusion and fused filament fabrication for three-dimensional printing of hybrid metal/polymer objects
Yuan-Hui Chueh et al.
ADDITIVE MANUFACTURING (2020)
Solvent-Free Approaches for the Processing of Scaffolds in Regenerative Medicine
Victor Santos-Rosales et al.
POLYMERS (2020)
Development and design of low volatile waterborne disperse ink using LF-NMR
Chengyong Gao et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2020)
Fiber reinforced GelMA hydrogel to induce the regeneration of corneal stroma
Bin Kong et al.
NATURE COMMUNICATIONS (2020)
Tensile Mechanical Behaviour of Multi-Polymer Sandwich Structures via Fused Deposition Modelling
David Moises Baca Lopez et al.
POLYMERS (2020)
Multi-Material 3D and 4D Printing: A Survey
Mohammad Rafiee et al.
ADVANCED SCIENCE (2020)
3D printing of multi-material composites with tunable shape memory behavior
Chao Yuan et al.
MATERIALS & DESIGN (2020)
High speed 3D material-jetting additive manufacturing of viscous graphene-based ink with high electrical conductivity
Elahe Jabari et al.
ADDITIVE MANUFACTURING (2020)
Recent Progress on Polymer Materials for Additive Manufacturing
Lisa Jiaying Tan et al.
ADVANCED FUNCTIONAL MATERIALS (2020)
Direct Ink Writing Technology (3D Printing) of Graphene-Based Ceramic Nanocomposites: A Review
Nestor Washington Solis Pinargote et al.
NANOMATERIALS (2020)
Recent advances in multi-material additive manufacturing: methods and applications
Daehoon Han et al.
CURRENT OPINION IN CHEMICAL ENGINEERING (2020)
3D printing: Principles and pharmaceutical applications of selective laser sintering
Atheer Awad et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)
Case Study of Chosen Sandwich-Structured Composite Materials for Means of Transport
Pavel Kostial et al.
COATINGS (2020)
From digital to sustainable: A scientometric review of smart city literature between 1990 and 2019
Chuanjun Zheng et al.
JOURNAL OF CLEANER PRODUCTION (2020)
A Fabrication Free, 3D Printed, Multi-Material, Self-Sensing Soft Actuator
Travis Hainsworth et al.
IEEE ROBOTICS AND AUTOMATION LETTERS (2020)
Vascular bioprinting with enzymatically degradable bioinks via multi-material projection-based stereolithography
Alexander Thomas et al.
ACTA BIOMATERIALIA (2020)
An interleukin-4-loaded bi-layer 3D printed scaffold promotes osteochondral regeneration
Lin Gong et al.
ACTA BIOMATERIALIA (2020)
Virtual reality applications for the built environment: Research trends and opportunities
Yuxuan Zhang et al.
AUTOMATION IN CONSTRUCTION (2020)
Fabricating 3D printable BIIR/PP TPV via masterbatch and interfacial compatibilization
Jiarui Hou et al.
COMPOSITES PART B-ENGINEERING (2020)
A review of 3D printing processes and materials for soft robotics
Yee Ling Yap et al.
RAPID PROTOTYPING JOURNAL (2020)
On the Effects of Process Parameters and Optimization of Interlaminate Bond Strength in 3D Printed ABS/CF-PLA Composite
Syed Waqar Ahmed et al.
POLYMERS (2020)
A Review of Stereolithography: Processes and Systems
Jigang Huang et al.
PROCESSES (2020)
Prediction of interlayer strength in material extrusion additive manufacturing
Timothy J. Coogan et al.
ADDITIVE MANUFACTURING (2020)
Overview of 3D additive manufacturing (AM) and corresponding AM composites
Yuxuan Wang et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)
An Overview of Additive Manufacturing of Polymers and Associated Composites
Shukantu Dev Nath et al.
POLYMERS (2020)
3D Printing of polymer composites with material jetting: Mechanical and fractographic analysis
Yun Lu Tee et al.
ADDITIVE MANUFACTURING (2020)
Additive manufacturing of hybrid metal/polymer objects via multiple-material laser powder bed fusion
Yuan-Hui Chueh et al.
ADDITIVE MANUFACTURING (2020)
Composite additive manufacturing of morphing aerospace structures
Urban Fasel et al.
MANUFACTURING LETTERS (2020)
3D Printing of Oil Paintings Based on Material Jetting and Its Reduction of Staircase Effect
Jiangping Yuan et al.
POLYMERS (2020)
Direct ink writing advances in multi-material structures for a sustainable future
Victoria G. Rocha et al.
JOURNAL OF MATERIALS CHEMISTRY A (2020)
Nanocellulose-Based Inks for 3D Bioprinting: Key Aspects in Research Development and Challenging Perspectives in Applications-A Mini Review
Xiaoju Wang et al.
BIOENGINEERING-BASEL (2020)
A Dual Approach in Direct Ink Writing of Thermally Cured Shape Memory Rubber Toughened Epoxy
Qiyi Chen et al.
ACS APPLIED POLYMER MATERIALS (2020)
Dental ceramic prostheses by stereolithography-based additive manufacturing: potentials and challenges
Hezhen Li et al.
ADVANCES IN APPLIED CERAMICS (2019)
A review of the process physics and material screening methods for polymer powder bed fusion additive manufacturing
Camden A. Chatham et al.
PROGRESS IN POLYMER SCIENCE (2019)
Building information modelling for off-site construction: Review and future directions
Xianfei Yin et al.
AUTOMATION IN CONSTRUCTION (2019)
Multi-material laser direct writing of aerosol jet layered polymers
Ludger Overmeyer et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2019)
Dynamic Photomask-Assisted Direct Ink Writing Multimaterial for Multilevel Triboelectric Nanogenerator
Kaijuan Chen et al.
ADVANCED FUNCTIONAL MATERIALS (2019)
Acetylated Nanocellulose for Single-Component Bioinks and Cell Proliferation on 3D-Printed Scaffolds
Rubina Ajdary et al.
BIOMACROMOLECULES (2019)
Digital light processing (DLP) 3D-printing technology and photoreactive polymers in fabrication of modified-release tablets
Hossam Kadry et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2019)
Automated storage and active cleaning for multi-material digital-light-processing printer
Christopher-Denny Matte et al.
RAPID PROTOTYPING JOURNAL (2019)
FDM 3D Printing of Polymers Containing Natural Fillers: A Review of their Mechanical Properties
Valentina Mazzanti et al.
POLYMERS (2019)
Topology optimization and 3D printing of multimaterial magnetic actuators and displays
Subramanian Sundaram et al.
SCIENCE ADVANCES (2019)
Rapid multi-material 3D printing with projection micro-stereolithography using dynamic fluidic control
Daehoon Han et al.
ADDITIVE MANUFACTURING (2019)
The influence of slicing parameters on the multi-material adhesion mechanisms of FDM printed parts: an exploratory study
Francesco Tamburrino et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2019)
Multi-material 3D printing of a soft pressure sensor
Md Omar Faruk Emon et al.
ADDITIVE MANUFACTURING (2019)
Binder jetting: A review of process, materials, and methods
Mohsen Ziaee et al.
ADDITIVE MANUFACTURING (2019)
Cellulose nanocrystals support material for 3D printing complexly shaped structures via multi-materials-multi-methods printing
Vincent Chi-Fung Li et al.
ADDITIVE MANUFACTURING (2019)
Inter-layer bonding characterisation between materials with different degrees of stiffness processed by fused filament fabrication
A. Khudiakova et al.
ADDITIVE MANUFACTURING (2019)
Mechanical and geometric properties of thermoformed and 3D printed clear dental aligners
Prashant Jindal et al.
AMERICAN JOURNAL OF ORTHODONTICS AND DENTOFACIAL ORTHOPEDICS (2019)
A scientometric analysis and critical review of computer vision applications for construction
Pablo Martinez et al.
AUTOMATION IN CONSTRUCTION (2019)
Voxelated soft matter via multimaterial multinozzle 3D printing
Mark A. Skylar-Scott et al.
NATURE (2019)
Print Me An Organ! Why We Are Not There Yet
Wei Long Ng et al.
PROGRESS IN POLYMER SCIENCE (2019)
Fast-Response, Stiffness-Tunable Soft Actuator by Hybrid Multimaterial 3D Printing
Yuan-Fang Zhang et al.
ADVANCED FUNCTIONAL MATERIALS (2019)
Review: The Impact of Metal Additive Manufacturing on the Aerospace Industry
Shahir Mohd Yusuf et al.
METALS (2019)
The m4 3D printer: A multi-material multi-method additive manufacturing platform for future 3D printed structures
Devin J. Roach et al.
ADDITIVE MANUFACTURING (2019)
Multi-Material Additive Manufacturing of Sustainable Innovative Materials and Structures
Rupinder Singh et al.
POLYMERS (2019)
Printing orientation defines anisotropic mechanical properties in additive manufacturing of upper limb prosthetics
Peter Maroti et al.
MATERIALS RESEARCH EXPRESS (2019)
The effect of viscosity and surface tension on inkjet printed picoliter dots
Sarah Krainer et al.
RSC ADVANCES (2019)
A Novel Monolithic Soft Robotic Thumb for an Anthropomorphic Prosthetic Hand
Hao Zhou et al.
IEEE ROBOTICS AND AUTOMATION LETTERS (2019)
4D printing applications in medical field: A brief review
Mohd Javaid et al.
CLINICAL EPIDEMIOLOGY AND GLOBAL HEALTH (2019)
Vat photopolymerization of charged monomers: 3D printing with supramolecular interactions
Emily M. Wilts et al.
POLYMER CHEMISTRY (2019)
A review on fabricating tissue scaffolds using vat photopolymerization
Nicholas A. Chartrain et al.
ACTA BIOMATERIALIA (2018)
Coding Cell Micropatterns Through Peptide Inkjet Printing for Arbitrary Biomineralized Architectures
Jin Guo et al.
ADVANCED FUNCTIONAL MATERIALS (2018)
Microfluidics-Enabled Multimaterial Maskless Stereolithographic Bioprinting
Amir K. Miri et al.
ADVANCED MATERIALS (2018)
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Tuan D. Ngo et al.
COMPOSITES PART B-ENGINEERING (2018)
3D printed hyperelastic bone scaffolds and regional gene therapy: A novel approach to bone healing
Ram Alluri et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2018)
A scientometric review of global research on sustainability and sustainable development
Timothy O. Olawumi et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Additive manufacturing of three-dimensional (3D) microfluidic-based microelectromechanical systems (MEMS) for acoustofluidic applications
Ellen Cesewski et al.
LAB ON A CHIP (2018)
Additive manufacturing of multi-material structures
Amit Bandyopadhyay et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2018)
Printing with mechanically interlocked extrudates using a custom bi-extruder for fused deposition modelling
Mohammad Abu Hasan Khondoker et al.
RAPID PROTOTYPING JOURNAL (2018)
Current and future trends in topology optimization for additive manufacturing
Jikai Liu et al.
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2018)
3D printing of robotic soft actuators with programmable bioinspired architectures
Manuel Schaffner et al.
NATURE COMMUNICATIONS (2018)
Multi-material Additive Manufacturing of Metamaterials with Giant, Tailorable Negative Poisson's Ratios
Da Chen et al.
SCIENTIFIC REPORTS (2018)
3D-printed bioabsordable polycaprolactone stent: The effect of process parameters on its physical features
Antonio J. Guerra et al.
MATERIALS & DESIGN (2018)
A hybrid additive manufacturing method for the fabrication of silicone bio-structures: 3D printing optimization and surface characterization
Farzad Liravi et al.
MATERIALS & DESIGN (2018)
3D printing of soft robotic systems
T. J. Wallin et al.
NATURE REVIEWS MATERIALS (2018)
Single-layer temperature-adjusting transition method to improve the bond strength of 3D-printed PCL/PLA parts
Weiyi Lin et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
High-Efficiency High-Resolution Multimaterial Fabrication for Digital Light Processing-Based Three-Dimensional Printing
Kavin Kowsari et al.
3D PRINTING AND ADDITIVE MANUFACTURING (2018)
Mechanical Analysis of Ceramic/Polymer Composite with Mesh-Type Lightweight Design Using Binder-Jet 3D Printing
Dong-Hyun Kim et al.
MATERIALS (2018)
Additive Manufactured Sandwich Composite/ABS Parts for Unmanned Aerial Vehicle Applications
Athanasios Galatas et al.
POLYMERS (2018)
3D FDM production and mechanical behavior of polymeric sandwich specimens embedding classical and honeycomb cores
Salvatore Brischetto et al.
CURVED AND LAYERED STRUCTURES (2018)
Multiple modulus silicone elastomers using 3D extrusion printing of low viscosity inks
Sijia Zheng et al.
ADDITIVE MANUFACTURING (2018)
Hybrid manufacturing - integrating traditional manufacturers with additive manufacturing (AM) supply chain
Danielle Strong et al.
ADDITIVE MANUFACTURING (2018)
Recent Advances in Biomaterials for 3D Printing and Tissue Engineering
Udayabhanu Jammalamadaka et al.
JOURNAL OF FUNCTIONAL BIOMATERIALS (2018)
Additive manufacturing tooling for the automotive industry
R. Leal et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Environmental impact assessment of an innovative strategy based on an additive and subtractive manufacturing combination
Van Thao Le et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Increased piezoelectric response in functional nanocomposites through multiwall carbon nanotube interface and fused-deposition modeling three-dimensional printing
Hoejin Kim et al.
MRS COMMUNICATIONS (2017)
3D printed highly elastic strain sensors of multiwalled carbon nanotube/thermoplastic polyurethane nanocomposites
Josef F. Christ et al.
MATERIALS & DESIGN (2017)
A review on composite materials and process parameters optimisation for the fused deposition modelling process
N. Mohan et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2017)
Evaluation of energy density measures and validation for powder bed fusion of polyamide
David Bourell et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2017)
Polymers for 3D Printing and Customized Additive Manufacturing
Samuel Clark Ligon et al.
CHEMICAL REVIEWS (2017)
Comparative Efficacies of Collagen-Based 3D Printed PCL/PLGA/β-TCP Composite Block Bone Grafts and Biphasic Calcium Phosphate Bone Substitute for Bone Regeneration
Kyoung-Sub Hwang et al.
MATERIALS (2017)
Hybrid 3D printing by bridging micro/nano processes
Hae-Sung Yoon et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2017)
Additive manufacturing in unmanned aerial vehicles (UAVs): Challenges and potential
G. D. Goh et al.
AEROSPACE SCIENCE AND TECHNOLOGY (2017)
Laser Sintered Magnesium-Calcium Silicate/Poly-ε-Caprolactone Scaffold for Bone Tissue Engineering
Kuo-Yang Tsai et al.
MATERIALS (2017)
Additive manufacturing technologies: state of the art and trends
Julien Gardan
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2016)
Three-dimensional Printed Scaffolds with Gelatin and Platelets Enhance In vitro Preosteoblast Growth Behavior and the Sustained-release Effect of Growth Factors
Wei Zhu et al.
CHINESE MEDICAL JOURNAL (2016)
Design and optimization of a high temperature microheater for inkjet deposition
Ausitn VanHorn et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Fused-filament 3D printing of drug products: Microstructure analysis and drug release characteristics of PVA-based caplets
Alvaro Goyanes et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2016)
Printing soft matter in three dimensions
Ryan L. Truby et al.
NATURE (2016)
Emergence of 3D Printed Dosage Forms: Opportunities and Challenges
Mohamed A. Alhnan et al.
PHARMACEUTICAL RESEARCH (2016)
Multiprocess 3D printing for increasing component functionality
Eric MacDonald et al.
SCIENCE (2016)
An evolutionary analysis of collaboration networks in scientometrics
Yuehua Zhao et al.
SCIENTOMETRICS (2016)
A review of emerging trends in global PPP research: analysis and visualization
Jinbo Song et al.
SCIENTOMETRICS (2016)
Fabrication of highly conductive graphene flexible circuits by 3D printing
Di Zhang et al.
SYNTHETIC METALS (2016)
3D printing of mineral-polymer bone substitutes based on sodium alginate and calcium phosphate
Aleksey A. Egorov et al.
BEILSTEIN JOURNAL OF NANOTECHNOLOGY (2016)
Enhancing the Hydrophilicity and Cell Attachment of 3D Printed PCL/Graphene Scaffolds for Bone Tissue Engineering
Weiguang Wang et al.
MATERIALS (2016)
Additive manufacturing of concrete in construction: potentials and challenges of 3D concrete printing
Freek Bos et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2016)
Microfluidic Printheads for Multimaterial 3D Printing of Viscoelastic Inks
James O. Hardin et al.
ADVANCED MATERIALS (2015)
Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling
Fuda Ning et al.
COMPOSITES PART B-ENGINEERING (2015)
Experimental and numerical analysis of the selective laser sintering (SLS) of PA12 and PEKK semi-crystalline polymers
Patrice Peyre et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)
Tuning the viscosity of halogen free bulk heterojunction inks for inkjet printed organic solar cells
Callum A. Lamont et al.
ORGANIC ELECTRONICS (2015)
A review of melt extrusion additive manufacturing processes: II. Materials, dimensional accuracy, and surface roughness
Brian N. Turner et al.
RAPID PROTOTYPING JOURNAL (2015)
A scientometric review of emerging trends and new developments in recommendation systems
Meen Chul Kim et al.
SCIENTOMETRICS (2015)
3D printing in aerospace and its long-term sustainability
Sunil C. Joshi et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2015)
Emergent trends and passing fads in project management research: A scientometric analysis of changes in the field
Julien Pollack et al.
INTERNATIONAL JOURNAL OF PROJECT MANAGEMENT (2015)
Preferred reporting items for systematic review and meta-analysis protocols (PRISMA-P) 2015 statement
David Moher et al.
SYSTEMATIC REVIEWS (2015)
Combined 3D Printing Technologies and Material for Fabrication of Tactile Sensors
Morteza Vatani et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2015)
Embedded 3D Printing of Strain Sensors within Highly Stretchable Elastomers
Joseph T. Muth et al.
ADVANCED MATERIALS (2014)
A review of melt extrusion additive manufacturing processes: I. Process design and modeling
Brian N. Turner et al.
RAPID PROTOTYPING JOURNAL (2014)
Compatible hybrid 3D printing of metal and nonmetal inks for direct manufacture of end functional devices
Wang Lei et al.
SCIENCE CHINA-TECHNOLOGICAL SCIENCES (2014)
Three-Dimensional Printed Multiphase Scaffolds for Regeneration of Periodontium Complex
Chang H. Lee et al.
TISSUE ENGINEERING PART A (2014)
3D Printing for the Rapid Prototyping of Structural Electronics
Eric Macdonald et al.
IEEE ACCESS (2014)
Novel polymeric support materials for jetting based additive manufacturing processes
M. Fahad et al.
RAPID PROTOTYPING JOURNAL (2013)
Multiple material additive manufacturing - Part 1: a review This review paper covers a decade of research on multiple material additive manufacturing technologies which can produce complex geometry parts with different materials
Mohammad Vaezi et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2013)
Additive manufacturing: technology, applications and research needs
Nannan Guo et al.
FRONTIERS OF MECHANICAL ENGINEERING (2013)
Multi-material stereolithography
Jae-Won Choi et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2011)
Variable property rapid prototyping Inspired by nature, where form is characterized by heterogeneous compositions, the paper presents a novel approach to layered manufacturing entitled variable property rapid prototyping
Neri Oxman
VIRTUAL AND PHYSICAL PROTOTYPING (2011)
Design and Fabrication of Materials with Desired Deformation Behavior
Bernd Bickel et al.
ACM TRANSACTIONS ON GRAPHICS (2010)
A review on stereolithography and its applications in biomedical engineering
Ferry P. W. Melchels et al.
BIOMATERIALS (2010)
Software survey: VOSviewer, a computer program for bibliometric mapping
Nees Jan van Eck et al.
SCIENTOMETRICS (2010)
Mapping knowledge structure by keyword co-occurrence: a first look at journal papers in Technology Foresight
Hsin-Ning Su et al.
SCIENTOMETRICS (2010)
Fire retardancy of clay/carbon nanofiber hybrid sheet in fiber reinforced polymer composites
Zhongfu Zhao et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2009)
Fabrication of three-dimensional polycaprolactone/hydroxyapatite tissue scaffolds and osteoblast-scaffold interactions in vitro
Lauren Shor et al.
BIOMATERIALS (2007)
Bending behavior of shape memory polymer based laminates
Chun-Sheng Zhang et al.
COMPOSITE STRUCTURES (2007)
Layered manufacturing of tissue engineering scaffolds via multi-nozzle deposition
YN Yan et al.
MATERIALS LETTERS (2003)
The literature of bibliometrics, scientometrics, and informetrics
WW Hood et al.
SCIENTOMETRICS (2001)
Is it possible to measure science? V. V. Nalimov's research in scientometrics
YV Granovsky
SCIENTOMETRICS (2001)