Related references
Note: Only part of the references are listed.Performance of fiber metal laminate composites embedded with AL and CU wire mesh
Prabu Krishnasamy et al.
JOURNAL OF INDUSTRIAL TEXTILES (2022)
Effect of hydrolysis time on the morphological, physical, chemical, and thermal behavior of sugar palm nanocrystalline cellulose (Arenga pinnata (Wurmb.) Merr)
R. A. Ilyas et al.
TEXTILE RESEARCH JOURNAL (2021)
Improving the flame retardancy and mechanical properties of epoxy composites using flame retardants with red mud waste
Sefa Kusakli et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2021)
Mechanical characterisation of kenaf/PALF reinforced composite-metal laminates: Effects of hybridisation and weaving architectures
Ng Lin Feng et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2021)
The Effects of Unbleached and Bleached Nanocellulose on the Thermal and Flammability of Polypropylene-Reinforced Kenaf Core Hybrid Polymer Bionanocomposites
Fatimah Athiyah Sabaruddin et al.
POLYMERS (2021)
Micro- and Nanocellulose in Polymer Composite Materials: A Review
Abdoulhdi A. Borhana Omran et al.
POLYMERS (2021)
Dynamic mechanical behaviour of kenaf cellulosic fibre biocomposites: a comprehensive review on chemical treatments
M. R. M. Asyraf et al.
CELLULOSE (2021)
Comparison of Static and Long-term Creep Behaviors between Balau Wood and Glass Fiber Reinforced Polymer Composite for Cross-arm Application
M. R. M. Asyraf et al.
FIBERS AND POLYMERS (2021)
A Review on Natural Fiber Reinforced Polymer Composite for Bullet Proof and Ballistic Applications
N. M. Nurazzi et al.
POLYMERS (2021)
Utilization of Bracing Arms as Additional Reinforcement in Pultruded Glass Fiber-Reinforced Polymer Composite Cross-Arms: Creep Experimental and Numerical Analyses
Muhammad Rizal Muhammad Asyraf et al.
POLYMERS (2021)
Potential of Natural Fiber Reinforced Polymer Composites in Sandwich Structures: A Review on Its Mechanical Properties
S. Alsubari et al.
POLYMERS (2021)
Sustainability Assessment and Techno-Economic Analysis of Thermally Enhanced Polymer Tube for Multi-Effect Distillation (MED) Technology
Furqan Tahir et al.
POLYMERS (2021)
Investigation of natural fibre metal laminate as car front hood
Noordiana Mohd Ishak et al.
MATERIALS RESEARCH EXPRESS (2021)
Effects of the liquid natural rubber (LNR) on mechanical properties and microstructure of epoxy/silica/kenaf hybrid composite for potential automotive applications
C. N. Aiza Jaafar et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)
Flammability, morphological and mechanical properties of sugar palm fiber/polyester yarn-reinforced epoxy hybrid biocomposites with magnesium hydroxide flame retardant filler
M. J. Suriani et al.
TEXTILE RESEARCH JOURNAL (2021)
Kenaf Fiber/Pet Yarn Reinforced Epoxy Hybrid Polymer Composites: Morphological, Tensile, and Flammability Properties
M. J. Suriani et al.
POLYMERS (2021)
Delamination and Manufacturing Defects in Natural Fiber-Reinforced Hybrid Composite: A Review
M. J. Suriani et al.
POLYMERS (2021)
Synergistic Effects of Graphene and Ammonium Polyphosphate Modified with Vinyltrimethoxysilane on the Properties of High-Impact Polystyrene Composites
Xianghui Shi et al.
POLYMERS (2021)
Potential of Honeycomb-Filled Composite Structure in Composite Cross-Arm Component: A Review on Recent Progress and Its Mechanical Properties
Abd Latif Amir et al.
POLYMERS (2021)
Flammability, Tensile, and Morphological Properties of Oil Palm Empty Fruit Bunches Fiber/Pet Yarn-Reinforced Epoxy Fire Retardant Hybrid Polymer Composites
M. J. Suriani et al.
POLYMERS (2021)
Processing and Characterisation of Banana Leaf Fibre Reinforced Thermoplastic Cassava Starch Composites
Ridhwan Jumaidin et al.
POLYMERS (2021)
Fabrication, Functionalization, and Application of Carbon Nanotube-Reinforced Polymer Composite: An Overview
Norizan Mohd Nurazzi et al.
POLYMERS (2021)
Polylactic Acid (PLA) Biocomposite: Processing, Additive Manufacturing and Advanced Applications
R. A. Ilyas et al.
POLYMERS (2021)
Performance of water mist system with base injection in extinguishing small container fires
Harshad Shrigondekar et al.
JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2021)
Characteristic of composite bioplastics from tapioca starch and sugarcane bagasse fiber: Effect of time duration of ultrasonication (Bath-Type)
Mochamad Asrofi et al.
MATERIALS TODAY-PROCEEDINGS (2021)
Development of metal matrix composites using recycled secondary raw materials from aluminium wastes
Ciprian Bulei et al.
MATERIALS TODAY-PROCEEDINGS (2021)
Characterization, Thermal and Antimicrobial Properties of Hybrid Cellulose Nanocomposite Films with in-Situ Generated Copper Nanoparticles in Tamarindus indica Nut Powder
T. Senthil Muthu Kumar et al.
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2021)
Sugar palm (Arenga pinnata [Wurmb.] Merr) starch films containing sugar palm nanofibrillated cellulose as reinforcement: Water barrier properties
R. A. Ilyas et al.
POLYMER COMPOSITES (2020)
Highly transparent and antimicrobial PVA based bionanocomposites reinforced by ginger nanofiber
Hairul Abral et al.
POLYMER TESTING (2020)
Transparent and antimicrobial cellulose film from ginger nanofiber
Hairul Abral et al.
FOOD HYDROCOLLOIDS (2020)
Enhanced flame retardancy of unsaturated polyester resin composites containing ammonium polyphosphate and metal oxides
Wei Gao et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2020)
Thermal, Biodegradability and Water Barrier Properties of Bio-Nanocomposites Based on Plasticised Sugar Palm Starch and Nanofibrillated Celluloses from Sugar Palm Fibres
R. A. Ilyas et al.
JOURNAL OF BIOBASED MATERIALS AND BIOENERGY (2020)
Effect of Magnesium Hydroxide and Aluminum Hydroxide on the Thermal Stability, Latent Heat and Flammability Properties of Paraffin/HDPE Phase Change Blends
Ru Zhou et al.
POLYMERS (2020)
Synergy effect between quaternary phosphonium ionic liquid and ammonium polyphosphate toward flame retardant PLA with improved toughness
Yun-Wan Jia et al.
COMPOSITES PART B-ENGINEERING (2020)
Conceptual design of multi-operation outdoor flexural creep test rig using hybrid concurrent engineering approach
M. R. M. Asyraf et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Woods and composites cantilever beam: A comprehensive review of experimental and numerical creep methodologies
M. R. M. Asyraf et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Electrical properties of sugar palm nanocrystalline cellulose reinforced sugar palm starch nanocomposites
M. D. Hazrol et al.
POLIMERY (2020)
Integration of TRIZ, morphological chart and ANP method for development of FRP composite portable fire extinguisher
M. R. M. Asyraf et al.
POLYMER COMPOSITES (2020)
Flame retardant polymeric nanocomposites through the combination of nanomaterials and conventional flame retardants
Wentao He et al.
PROGRESS IN MATERIALS SCIENCE (2020)
Synthesis and characterisation of sulphonamide (Schiff base) ligand and its copper metal complex and their efficiency in polyurethane varnish as flame retardant and antimicrobial surface coating additives
H. Abd El-Wahab et al.
PROGRESS IN ORGANIC COATINGS (2020)
Evaluation of Design and Simulation of Creep Test Rig for Full-Scale Crossarm Structure
M. R. M. Asyraf et al.
ADVANCES IN CIVIL ENGINEERING (2020)
The rise of MOFs and their derivatives for flame retardant polymeric materials: A critical review
Ye-Tang Pan et al.
COMPOSITES PART B-ENGINEERING (2020)
Characterization Study of Empty Fruit Bunch (EFB) Fibers Reinforcement in Poly(Butylene) Succinate (PBS)/Starch/Glycerol Composite Sheet
Rafiqah S. Ayu et al.
POLYMERS (2020)
The Effects of Reprocessing and Fiber Treatments on the Properties of Polypropylene-Sugarcane Bagasse Biocomposites
Juan P. Correa-Aguirre et al.
POLYMERS (2020)
Potential Application of Green Composites for Cross Arm Component in Transmission Tower: A Brief Review
M. R. M. Asyraf et al.
INTERNATIONAL JOURNAL OF POLYMER SCIENCE (2020)
Influence of CaCO3 in pultruded glass fiber/unsaturated polyester resin composite on flexural creep behavior using conventional and time-temperature superposition principle methods
A. N. Johari et al.
POLIMERY (2020)
Recent Advances in Preparation, Mechanisms, and Applications of Thermally Conductive Polymer Composites: A Review
Hao Zhang et al.
JOURNAL OF COMPOSITES SCIENCE (2020)
The Effects of Silver Nanoparticles Compositions on the Mechanical, Physiochemical, Antibacterial, and Morphology Properties of Sugar Palm Starch Biocomposites for Antibacterial Coating
A. Rozilah et al.
POLYMERS (2020)
The effect of water immersion and fibre content on properties of corn husk fibres reinforced thermoset polyester composite
Nasmi Herlina Sari et al.
POLYMER TESTING (2020)
Alkali treated coir/pineapple leaf fibres reinforced PLA hybrid composites: Evaluation of mechanical, morphological, thermal and physical properties
R. Siakeng et al.
EXPRESS POLYMER LETTERS (2020)
Flame-retardant wood polymer composites (WPCs) as potential fire safe bio-based materials for building products: Preparation, flammability and mechanical properties
Ehsan N. Kalali et al.
FIRE SAFETY JOURNAL (2019)
PLA-coated sisal fibre-reinforced polyester composite: Water absorption, static and dynamic mechanical properties
M. K. Gupta et al.
JOURNAL OF COMPOSITE MATERIALS (2019)
Influence of surface flame-retardant layer containing ammonium polyphosphate and expandable graphite on the performance of jute/polypropylene composites
Boyuan Guo et al.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2019)
Cellulose nanofibers isolation and characterization from ramie using a chemical-ultrasonic treatment
Edi Syafri et al.
JOURNAL OF NATURAL FIBERS (2019)
Sugar palm nanofibrillated cellulose (Arenga pinnata (Wurmb.) Merr): Effect of cycles on their yield, physic-chemical, morphological and thermal behavior
R. A. Ilyas et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2019)
Effect of different size-modified expandable graphite and ammonium polyphosphate on the flame retardancy, thermal stability, physical, and mechanical properties of rigid polyurethane foam
Xiu-Yan Pang et al.
POLYMER ENGINEERING AND SCIENCE (2019)
Physical and thermal properties of treated sugar palm/glass fibre reinforced thermoplastic polyurethane hybrid composites
A. Atiqah et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)
Effect of sugar palm nanofibrillated cellulose concentrations on morphological, mechanical and physical properties of biodegradable films based on agro-waste sugar palm (Arenga pinnata (Wurmb.) Merr) starch
R. A. Ilyas et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)
Cu(0) and Cu(II) decorated graphene hybrid on improving fireproof efficiency of intumescent flame-retardant epoxy resins
Tao-Ping Ye et al.
COMPOSITES PART B-ENGINEERING (2019)
Degradation and physical properties of sugar palm starch/sugar palm nanofibrillated cellulose bionanocomposite
M. S. N. Atikah et al.
POLIMERY (2019)
Conceptual design of creep testing rig for full-scale cross arm using TRIZ-Morphological chart-analytic network process technique
M. R. M. Asyraf et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)
Effect of sonication time on the thermal stability, moisture absorption, and biodegradation of water hyacinth (Eichhornia crassipes) nanocellulose-filled bengkuang (Pachyrhizus erosus) starch biocomposites
Edi Syafri et al.
Journal of Materials Research and Technology-JMR&T (2019)
Hemp hurd and alfalfa as particle filler to improve the thermo-mechanical and fire retardant properties of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate)
Daniele Battegazzore et al.
POLYMER COMPOSITES (2019)
Effect of Zinc Borate on Flammability of PET Woven Fabrics
Mustafa E. Ureyen et al.
ADVANCES IN POLYMER TECHNOLOGY (2019)
Thermal Properties of Woven Kenaf/Carbon Fibre-Reinforced Epoxy Hybrid Composite Panels
H. A. Aisyah et al.
INTERNATIONAL JOURNAL OF POLYMER SCIENCE (2019)
Isolation and characterization of nanocrystalline cellulose from sugar palm fibres (Arenga Pinnata)
R. A. Ilyas et al.
CARBOHYDRATE POLYMERS (2018)
Anisotropic thermally conductive flexible polymer composites filled with hexagonal born nitride (h-BN) platelets and ammine carbon nanotubes (CNT-NH2): Effects of the filler distribution and orientation
Zheng Su et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
A review of flammability of natural fibre reinforced polymeric composites
N. K. Kim et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2018)
Influence of Ionic Liquid-Based Metal-Organic Hybrid on Thermal Degradation, Flame Retardancy, and Smoke Suppression Properties of Epoxy Resin Composites
Fei Xiao et al.
JOURNAL OF MATERIALS SCIENCE (2018)
Additive Manufacturing of Metallic and Ceramic Components by the Material Extrusion of Highly-Filled Polymers: A Review and Future Perspectives
Joamin Gonzalez-Gutierrez et al.
MATERIALS (2018)
Development and characterization of sugar palm nanocrystalline cellulose reinforced sugar palm starch bionanocomposites
R. A. Ilyas et al.
CARBOHYDRATE POLYMERS (2018)
Novel fibre metal laminate sandwich composite structure with sisal woven core
Luciano Machado Gomes Vieira et al.
INDUSTRIAL CROPS AND PRODUCTS (2017)
Date palm fibre filled recycled ternary polymer blend composites with enhanced flame retardancy
Khadija M. Zadeh et al.
POLYMER TESTING (2017)
A study on flammability and moisture absorption behavior of sisal/coir fiber reinforced hybrid composites
Akash et al.
2ND INTERNATIONAL CONFERENCE ON MINING, MATERIAL AND METALLURGICAL ENGINEERING (2017)
Scalable Preparation of Multifunctional Fire-Retardant Ultralight Graphene Foams
Chuangang Hu et al.
ACS NANO (2016)
Melamine poly(zinc phosphate) as flame retardant in epoxy resin: Decomposition pathways, molecular mechanisms and morphology of fire residues
Patrick Mueller et al.
POLYMER DEGRADATION AND STABILITY (2016)
Flame Retardant Polymer Composites
Mahadev Bar et al.
FIBERS AND POLYMERS (2015)
Enhanced flame retardancy of polypropylene by melamine-modified graphene oxide
Bihe Yuan et al.
JOURNAL OF MATERIALS SCIENCE (2015)
Thermo-mechanical performance of poly(lactic acid)/flax fibre-reinforced biocomposites
Elias Nassiopoulos et al.
MATERIALS & DESIGN (2015)
Recent advances for microencapsulation of flame retardant
Bibo Wang et al.
POLYMER DEGRADATION AND STABILITY (2015)
Effect of flame retardants on flame retardant, mechanical, and thermal properties of sisal fiber/polypropylene composites
Rachasit Jeencham et al.
COMPOSITES PART B-ENGINEERING (2014)
Flame retardancy and thermal stability of ethylene-vinyl acetate copolymer nanocomposites with alumina trihydrate and montmorillonite
Ming-Kuen Chang et al.
JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2014)
Effect of Amino alcohol functionalized polyethylene as compatibilizer for LDPE/EVA/clay/flame-retardant nanocomposites
R. Lujan-Acosta et al.
MATERIALS CHEMISTRY AND PHYSICS (2014)
Flame retardant effect of boron compounds on red phosphorus containing epoxy resins
Mehmet Dogan et al.
POLYMER DEGRADATION AND STABILITY (2014)
The potential of metal oxalates as novel flame retardants and synergists for engineering polymers
A. F. Holdsworth et al.
POLYMER DEGRADATION AND STABILITY (2014)
Different flame retardancy effects and mechanisms of aluminium phosphinate in PPO, TPU and PP
Hongxia Li et al.
POLYMER DEGRADATION AND STABILITY (2014)
Modification of ramie fabric with a metal-ion-doped flame-retardant coating
Lili Wang et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2013)
Low combustible polypropylene/flax/magnesium hydroxide composites: mechanical, flame retardation characterization and recycling effect
Ahmed El-sabbagh et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2013)
Effect of jute and kapok fibers on properties of thermoplastic cassava starch composites
Jutarat Prachayawarakorn et al.
MATERIALS & DESIGN (2013)
Effect of Agar and Cotton Fiber on Properties of Thermoplastic Waxy Rice Starch Composites
J. Prachayawarakorn et al.
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2012)
The Fabrication, Properties, and Uses of Graphene/Polymer Composites
Jinhong Du et al.
MACROMOLECULAR CHEMISTRY AND PHYSICS (2012)
Synergistic flame retardant effect of metal hydroxide and nanoclay in EVA composites
Ynh-Yue Yen et al.
POLYMER DEGRADATION AND STABILITY (2012)
Flame retardant biocomposites: Synergism between phosphinate and nanometric metal oxides
E. Gallo et al.
EUROPEAN POLYMER JOURNAL (2011)
Synergistic Effect of Metal Oxides on the Flame Retardancy and Thermal Degradation of Novel Intumescent Flame-Retardant Thermoplastic Polyurethanes
Mo Lin et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2011)
Effects of metal oxides on intumescent flame-retardant polypropylene
Na Wu et al.
POLYMERS FOR ADVANCED TECHNOLOGIES (2011)
The Thermal Property and Flame Retardant Mechanism of Intumescent Flame Retardant Paraffin System with Metal
Ping Zhang et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2010)
A review on flame retardant technology in China. Part 1: development of flame retardants
Li Chen et al.
POLYMERS FOR ADVANCED TECHNOLOGIES (2010)
Mechanical properties and flammability of sisal/PP composites: Effect of flame retardant type and content
Nitinat Suppakarn et al.
COMPOSITES PART B-ENGINEERING (2009)
Recent Development in Natural Fiber Reinforced Polypropylene Composites
Ramakrishna Malkapuram et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2009)
Effects of metal chelates on a novel oligomeric intumescent flame retardant system for polypropylene
Pingan Song et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2008)
A novel halogen-free flame retardant for glass-fiber-reinforced poly(ethylene terephthalate)
Cheng-Shou Zhao et al.
POLYMER DEGRADATION AND STABILITY (2008)
Flame retardancy mechanisms of metal phosphinates and metal phosphinates in combination with melamine cyanurate in glass-fiber reinforced poly(1,4-butylene terephthalate): the influence of metal cation
Ulrike Braun et al.
POLYMERS FOR ADVANCED TECHNOLOGIES (2008)
A novel intumescent flame-retardant system containing metal chelates for polyvinyl alcohol
De-Long Wang et al.
POLYMER DEGRADATION AND STABILITY (2007)
Fire retardancy of a reactively extruded intumescent flame retardant polyethylene system enhanced by metal chelates
De-Yi Wang et al.
POLYMER DEGRADATION AND STABILITY (2007)
A review of recent progress in phosphorus-based flame retardants
Sergei V. Levchik et al.
JOURNAL OF FIRE SCIENCES (2006)
Metal filled high density polyethylene composites - Electrical and tensile properties
Nurazreena et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2006)
Effect of nanoparticles on the improvement in fire-resistant and anti-ageing properties of flame-retardant coating
ZY Wang et al.
SURFACE & COATINGS TECHNOLOGY (2006)
The sensitisation of thermal decomposition of ammonium polyphosphate by selected metal ions and their potential for improved cotton fabric flame retardancy
PJ Davies et al.
POLYMER DEGRADATION AND STABILITY (2005)
Flame retardancy of nanocomposites - from research to technical products
G Beyer
JOURNAL OF FIRE SCIENCES (2005)
Flame retardant and mechanical properties of natural fibre-PP composites containing magnesium hydroxide
M Sain et al.
POLYMER DEGRADATION AND STABILITY (2004)
Flame retardant smoke suppressant protection for poly vinylchloride
SK Sharma et al.
FIRE TECHNOLOGY (2004)
A review of flame retardant polypropylene fibres
S Zhang et al.
PROGRESS IN POLYMER SCIENCE (2003)
Electrical and thermal conductivity of polymers filled with metal powders
YP Mamunya et al.
EUROPEAN POLYMER JOURNAL (2002)
Electrical properties of composites as affected by the degree of mixedness of the conductive filler in the polymer matrix
DM Kalyon et al.
POLYMER ENGINEERING AND SCIENCE (2002)
Flame retardant properties of EVA-nanocomposites and improvements by combination of nanofillers with aluminium trihydrate
G Beyer
FIRE AND MATERIALS (2001)
Mechanical and thermal properties of zinc powder filled high density polyethylene composites
M Rusu et al.
POLYMER TESTING (2001)