Related references
Note: Only part of the references are listed.Effects of cutting temperature and process optimization in drilling of GFRP composites
A. Tamer Erturk et al.
JOURNAL OF COMPOSITE MATERIALS (2021)
Development of an artificial neural network for predicting energy absorption capability of thermoplastic commingled composites
R. M. Di Benedetto et al.
COMPOSITE STRUCTURES (2021)
Mechanical model for predicting thrust force with tool wear effects in drilling of unidirectional CFRP
Yu Bai et al.
COMPOSITE STRUCTURES (2021)
Experimental and statistical analysis of strength of glass fiber reinforced polymer composite for different fiber architecture
Hitesh Jariwala et al.
POLYMER COMPOSITES (2021)
Study on dedicated drill bit design for carbon fiber reinforced polymer drilling with improved cutting mechanism
Liming Shu et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)
Effect of chopped carbon fiber on interfacial behaviors of ICCP-SS system
Wan-qian Li et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Novel fiber fracture criteria for revealing forming mechanisms of burrs and cracking at hole-exit in drilling Carbon Fiber Reinforced Plastic
Boyu Zhang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)
Novel chip-breaking structure of step drill for drilling damage reduction on CFRP/Al stack
Fu-ji Wang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)
On the analysis of temperatures, surface morphologies and tool wear in drilling CFRP/Ti6Al4V stacks under different cutting sequence strategies
Jinyang Xu et al.
COMPOSITE STRUCTURES (2020)
Effect of adding a woven glass ply at the exit of the hole of CFRP laminates on delamination during drilling
P. Rahme et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)
Multi-margin drill structure for improving hole quality and dimensional consistency in drilling Ti/CFRP stacks
Zhen-yuan Jia et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)
Innovative joining technology for the production of hybrid components from FRP and metals
U. Reisgen et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)
Determination of delamination in drilling of carbon fiber reinforced carbon matrix composites/Al 6013-T651 stacks
Senol Bayraktar et al.
MEASUREMENT (2020)
A new approach to control the delamination and thrust force during drilling of polymer nanocomposites reinforced by graphene oxide/carbon fiber
Jogendra Kumar et al.
COMPOSITE STRUCTURES (2020)
Mechanistic force modelling in drilling of AFRP composite considering the chisel edge extrusion
Sinan Liu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
Analytical study of delamination damage and delamination-free drilling method of CFRP composite
Zhenyuan Jia et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)
Cutting Processes of Natural Fiber-Reinforced Polymer Composites
Fathi Masoud et al.
POLYMERS (2020)
Optimized selection of process parameters based on reasonable control of axial force and hole-exit temperature in drilling of CFRP
Boyu Zhang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
Orthogonal Experimental Analysis and Mechanism Study on Electrochemical Catalytic Treatment of Carbon Fiber-Reinforced Plastics Assisted by Phosphotungstic Acid
Chun Pei et al.
POLYMERS (2020)
Mechanical Joining of Fibre Reinforced Polymer Composites to Metals-A Review. Part I: Bolted Joining
Anna Galinska
POLYMERS (2020)
Augmentation of the Delamination Factor in Drilling of Carbon Fibre-Reinforced Polymer Composites (CFRP)
Sharizal Ahmad Sobri et al.
POLYMERS (2020)
Experimental and numerical analysis of the influence of drill point angle when drilling biocomposites
A. Diaz-Alvarez et al.
COMPOSITE STRUCTURES (2019)
Effect of machining parameters and cutting tool coating on hole quality in dry drilling of fibre metal laminates
K. Giasin et al.
COMPOSITE STRUCTURES (2019)
Delamination formation, evaluation and suppression during drilling of composite laminates: A review
Daxi Geng et al.
COMPOSITE STRUCTURES (2019)
Critical thrust force and critical feed rate in drilling flax fibre composites: A comparative study of various thrust force models
Aiman Akmal Abdul Nasir et al.
COMPOSITES PART B-ENGINEERING (2019)
Heat effect on the material removal in the machining of fibre-reinforced polymer composites
Weixing Xu et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2019)
New nonlinear regression modeling and multi-objective optimization of cutting parameters in drilling of GFRE composites to minimize delamination
M. A. Agwa et al.
POLYMER TESTING (2019)
Harnessing Deep-Hole Drilling to Fabricate Air-Structured Polymer Optical Fibres
Eneko Arrospide et al.
POLYMERS (2019)
Influence of the manufacturing technology on impact and flexural properties of GF/PP commingled twill fabric laminates
Antonio Formisano et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)
New Compound Drill Bit for Damage Reduction in Drilling CFRP
Xinyi Qiu et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2019)
Study on chisel edge drilling behavior and step drill structure on delamination in drilling CFRP
Xinyi Qiu et al.
COMPOSITE STRUCTURES (2018)
Drilling of pultruded and liquid composite moulded glass/epoxy thick composites: Experimental and statistical investigation
B. Ramesh et al.
MEASUREMENT (2018)
Drill-exit temperature characteristics in drilling of UD and MD CFRP composites based on infrared thermography
Rao Fu et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2018)
Recent advances in twist drill design for composite machining: A critical review
Sikiru Oluwarotimi Ismail et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2017)
Low-velocity impact of woven CFRE composites under different temperature levels
U. A. Khashaba et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2017)
Drilling analysis of thin woven glass-fiber reinforced epoxy composites
U. A. Khashaba et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
Thermo-mechanical modelling of FRP cross-ply composite laminates drilling: Delamination damage analysis
Sikiru Oluwarotimi Ismail et al.
COMPOSITES PART B-ENGINEERING (2017)
Multi-objective optimization in drilling of CFRP (polyester) composites: Application of a fuzzy embedded harmony search (HS) algorithm
Kumar Abhishek et al.
MEASUREMENT (2016)
Measurement and optimisation of residual tensile strength and delamination damage of drilled flax fibre reinforced composites
A. A. Abdul Nasir et al.
MEASUREMENT (2015)
Critical thrust force predicting modeling for delamination-free drilling of metal-FRP stacks
Zhenchao Qi et al.
COMPOSITE STRUCTURES (2014)
Experimental study of surface quality and damage when drilling unidirectional CFRP composites
Eshetu D. Eneyew et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2014)
Experimental delamination analyses of CFRPs using different drill geometries
T. J. Grilo et al.
COMPOSITES PART B-ENGINEERING (2013)
Application of the central composite design in optimization of machining parameters in drilling hybrid metal matrix composites
Thiagarajan Rajmohan et al.
MEASUREMENT (2013)
Influence of Point Angle on Drill Hole Quality and Machining Forces when Drilling CFRP
Uwe Heisel et al.
FIFTH CIRP CONFERENCE ON HIGH PERFORMANCE CUTTING 2012 (2012)
Experimental investigation and optimisation in drilling of GFRP composites
K. Palanikumar
MEASUREMENT (2011)
Drilling tool geometry evaluation for reinforced composite laminates
Luis Miguel P. Durao et al.
COMPOSITE STRUCTURES (2010)
Machinability analysis in drilling woven GFR/epoxy composites: Part I - Effect of machining parameters
U. A. Khashaba et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2010)
Machinability analysis in drilling woven GFR/epoxy composites: Part II - Effect of drill wear
U. A. Khashaba et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2010)
Optimization of cutting parameters on delamination based on Taguchi method during drilling of GFRP composite
E. Kilickap
EXPERT SYSTEMS WITH APPLICATIONS (2010)
Wear mechanisms and tool life management of WC-Co drills during dry high speed drilling of woven carbon fibre composites
Sanjay Rawat et al.
WEAR (2009)
Analysis of parametric influence on delamination in high-speed drilling of carbon fiber reinforced plastic composites
V. N. Gaitonde et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)
Delamination in drilling GFR-thermoset composites
UA Khashaba
COMPOSITE STRUCTURES (2004)