Related references
Note: Only part of the references are listed.A review of topology optimization for additive manufacturing: Status and challenges
Jihong Zhu et al.
CHINESE JOURNAL OF AERONAUTICS (2021)
The Slugs-test for extrusion-based additive manufacturing: Protocol, analysis and practical limits
Nicolas Ducoulombier et al.
CEMENT & CONCRETE COMPOSITES (2021)
Development of 3D printed orthotic device for flat foot problem
S. Koteswari et al.
MATERIALS TODAY-PROCEEDINGS (2021)
Current state and future scope of additive manufacturing technologies via vat photopolymerization
Ribin Varghese Pazhamannil et al.
MATERIALS TODAY-PROCEEDINGS (2021)
Dot-patterned hybrid magnetorheological elastomer developed by 3D printing
A. K. Bastola et al.
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2020)
An Overview of Additive Manufacturing of Polymers and Associated Composites
Shukantu Dev Nath et al.
POLYMERS (2020)
Graded lattice structures: Simultaneous enhancement in stiffness and energy absorption
H. Niknam et al.
MATERIALS & DESIGN (2020)
Optimization of energy absorption performance of polymer honeycombs by density gradation
Oyindamola Rahman et al.
COMPOSITES PART C: OPEN ACCESS (2020)
A review on recent advancements in fused deposition modeling
V. Dhinakaran et al.
MATERIALS TODAY-PROCEEDINGS (2020)
Additive Manufacturing Technologies: An Overview about 3D Printing Methods and Future Prospects
Mariano Jimenez et al.
COMPLEXITY (2019)
Polymers for additive manufacturing and 4D-printing: Materials, methodologies, and biomedical applications
Carmen M. Gonzalez-Henriquez et al.
PROGRESS IN POLYMER SCIENCE (2019)
Additive manufacturing: Challenges, trends, and applications
Osama Abdulhameed et al.
ADVANCES IN MECHANICAL ENGINEERING (2019)
Design and evaluation of 3D printed polymeric cellular materials for dynamic energy absorption
Fatah Habib et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Functional gradient structural design of customized diabetic insoles
Lei Tang et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2019)
Mechanical characteristics of wood, ceramic, metal and carbon fiber-based PLA composites fabricated by FDM
Zhaobing Liu et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)
Energy absorption of muscle-inspired hierarchical structure: Experimental investigation
H. H. Tsang et al.
COMPOSITE STRUCTURES (2019)
Polymer Design for 3D Printing Elastomers: Recent Advances in Structure, Properties, and Printing
Jana Herzberger et al.
PROGRESS IN POLYMER SCIENCE (2019)
A 3D printed melt-compounded antibiotic loaded thermoplastic polyurethane heart valve ring design: an integrated framework of experimental material tests and numerical simulations
Emanuele Gasparotti et al.
INTERNATIONAL JOURNAL OF POLYMERIC MATERIALS AND POLYMERIC BIOMATERIALS (2019)
Evaluation of the Mechanical Properties of Porous Thermoplastic Polyurethane Obtained by 3D Printing for Protective Gear
Hyojeong Lee et al.
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2019)
Additive Manufacturing With Soft TPU - Adhesion Strength in Multimaterial Flexible Joints
Conor G. Harris et al.
FRONTIERS IN MECHANICAL ENGINEERING-SWITZERLAND (2019)
Feasibility of force detection in 3D printed flexible material using embedded sensors
Robert Ponder et al.
SENSORS AND SMART STRUCTURES TECHNOLOGIES FOR CIVIL, MECHANICAL, AND AEROSPACE SYSTEMS 2019 (2019)
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Tuan D. Ngo et al.
COMPOSITES PART B-ENGINEERING (2018)
3D printing of functional anatomical insoles
Miguel Davia-Aracil et al.
COMPUTERS IN INDUSTRY (2018)
The effect of additive manufacturing on global energy demand: An assessment using a bottom-up approach
Leendert A. Verhoef et al.
ENERGY POLICY (2018)
Additive manufacturing: scientific and technological challenges, market uptake and opportunities
Syed A. M. Tofail et al.
MATERIALS TODAY (2018)
FDM process parameters influence over the mechanical properties of polymer specimens: A review
Diana Popescu et al.
POLYMER TESTING (2018)
Effect of process parameters on tensile strength of FDM printed PLA part
Shilpesh R. Rajpurohit et al.
RAPID PROTOTYPING JOURNAL (2018)
Fabrication and Characterization of Flexible Medical-Grade TPU Filament for Fused Deposition Modeling 3DP Technology
Agnieszka Harynska et al.
POLYMERS (2018)
Multi-material 3D printing: The relevance of materials affinity on the boundary interface performance
L. R. Lopes et al.
ADDITIVE MANUFACTURING (2018)
3D soft auxetic lattice structures fabricated by selective laser sintering: TPU powder evaluation and process optimization
Shangqin Yuan et al.
MATERIALS & DESIGN (2017)
3D printed thermoplastic polyurethane with isotropic material properties
Cameron Hohimer et al.
BEHAVIOR AND MECHANICS OF MULTIFUNCTIONAL MATERIALS AND COMPOSITES 2017 (2017)
3D-printed upper limb prostheses: a review
Jelle ten Kate et al.
DISABILITY AND REHABILITATION-ASSISTIVE TECHNOLOGY (2017)
A review on composite materials and process parameters optimisation for the fused deposition modelling process
N. Mohan et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2017)
Energy Absorption of Thermoplastic Polyurethane Lattice Structures via 3D Printing: Modeling and Prediction
Fei Shen et al.
INTERNATIONAL JOURNAL OF APPLIED MECHANICS (2016)
3D printed polyurethane honeycombs for repeated tailored energy absorption
Simon R. G. Bates et al.
MATERIALS & DESIGN (2016)
Effect of Infill Parameters on Tensile Mechanical Behavior in Desktop 3D Printing
Miguel Fernandez-Vicente et al.
3D PRINTING AND ADDITIVE MANUFACTURING (2016)
Mechanical properties of FDM and SLA low-cost 3-D prints
Ksawery Szykiedans et al.
20TH INTERNATIONAL CONFERENCE MACHINE MODELING AND SIMULATIONS, MMS 2015 (2016)
Microstructures to Control Elasticity in 3D Printing
Christian Schumacher et al.
ACM TRANSACTIONS ON GRAPHICS (2015)
Elastic Textures for Additive Fabrication
Julian Panetta et al.
ACM TRANSACTIONS ON GRAPHICS (2015)
A review of melt extrusion additive manufacturing processes: II. Materials, dimensional accuracy, and surface roughness
Brian N. Turner et al.
RAPID PROTOTYPING JOURNAL (2015)
Mandibular reconstruction using stereolithographic 3-dimensional printing modeling technology
Adir Cohen et al.
ORAL SURGERY ORAL MEDICINE ORAL PATHOLOGY ORAL RADIOLOGY AND ENDODONTOLOGY (2009)