4.7 Review

Structural Design Strategies of Polymer Matrix Composites for Electromagnetic Interference Shielding: A Review

Related references

Note: Only part of the references are listed.
Article Chemistry, Multidisciplinary

Multifunctional Ti3C2Tx MXene Composite Hydrogels with Strain Sensitivity toward Absorption-Dominated Electromagnetic- Interference Shielding

Yunyi Zhu et al.

Summary: In this study, a hydrogel-type shielding material incorporating MXene and poly(acrylic acid) was successfully fabricated through a biomineralization-inspired assembly route. The composite hydrogel exhibits excellent stretchability, recyclability, high shielding performance, and fast self-healing capability, making it suitable for electromagnetic interference shielding in terahertz technologies. The sensitive deformation responses of the hydrogel also allow for its use as an on-skin sensor. This work provides an alternative strategy for designing next-generation EMI shielding materials and a highly efficient method for fabricating MXene composites on a macroscopic scale.

ACS NANO (2021)

Article Chemistry, Multidisciplinary

Hierarchical Porous Film with Layer-by-Layer Assembly of 2D Copper Nanosheets for Ultimate Electromagnetic Interference Shielding

Ho Kwang Choi et al.

Summary: Research has shown that hierarchical porous Cu foils assembled from Cu nanosheets exhibit outstanding EMI shielding performance, suggesting that Cu nanosheets and their layer-by-layer assembly are a promising technology for practical electronic applications.

ACS NANO (2021)

Article Engineering, Environmental

Wearable, ultrathin and transparent bacterial celluloses/MXene film with Janus structure and excellent mechanical property for electromagnetic interference shielding

Chang Ma et al.

Summary: A novel Janus bacterial cellulose/MXene film with excellent flexibility, transparency, and conductivity was demonstrated, showing potential for skin-contactable materials. The thin and light film exhibited high tensile strength, folding-endurance, and specific shielding effectiveness, making it a promising candidate for wearable devices, military technology, and human electronic equipment.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Engineering, Manufacturing

Lightweight polymethacrylimide@copper/nickel composite foams for electromagnetic shielding and monopole antennas

Jianwei Li et al.

Summary: A composite copper and nickel-plated polymethacrylimide foam was prepared through electroless plating method, showing high surface electrical conductivity and electromagnetic interface shielding effectiveness. The metallized foam-based antennas demonstrated remarkable radiation performances and significant weight reduction compared to traditional metal-based antennas, facilitating lightweight design of portable telecommunication devices.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)

Article Engineering, Manufacturing

Excellent thermally conducting modified graphite nanoplatelets and MWCNTs/poly(phenylene sulfone) composites for high-performance electromagnetic interference shielding effectiveness

Qingxia He et al.

Summary: In this study, mussel-inspired modification of graphite nanoplatelets (GnPs@PDA) was combined with multi-walled carbon nanotubes (MWCNTs) to create a well-dispersed hybrid filler, which was then incorporated into poly(phenylene sulfone) (PPSU) to produce thermally conducting composites with excellent electromagnetic shielding efficiency. The composites exhibited significantly increased thermal conductivity and electrical conductivity, along with remarkable EMI effectiveness and thermal stability, making them promising alternatives for multifunctional applications in electronics, thermal management, and EMI protection at high temperatures.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)

Article Nanoscience & Nanotechnology

Lotus Leaf-Derived Gradient Hierarchical Porous C/MoS2 Morphology Genetic Composites with Wideband and Tunable Electromagnetic Absorption Performance

Fei Pan et al.

Summary: Lotus leaf-derived gradient hierarchical porous C/MoS2 morphology genetic composites were successfully fabricated with excellent electromagnetic absorption performance. A brand-new dielectric sum-quotient model was proposed to analyze the electromagnetic performance of the non-magnetic material system. By considering the dielectric constant and specific sum and quotient of permittivity, suitable materials with designable electromagnetic absorption performance could be sought through material genetic engineering.

NANO-MICRO LETTERS (2021)

Article Materials Science, Multidisciplinary

Flexible, stretchable and magnetic Fe3O4@Ti3C2Tx/elastomer with supramolecular interfacial crosslinking for enhancing mechanical and electromagnetic interference shielding performance

Quancheng Song et al.

Summary: In this study, flexible FMDE materials with excellent electromagnetic shielding performance were prepared by designing nanostructures and regulating interface interactions, demonstrating outstanding mechanical properties.

SCIENCE CHINA-MATERIALS (2021)

Article Materials Science, Composites

MXenes for polymer matrix electromagnetic interference shielding composites: A review

Ping Song et al.

Summary: The review discusses the basic properties of MXenes as EMI shielding materials, and the influence of their precursor MAX and preparation methods on MXenes properties. It also focuses on the preparation methods of MXenes and their MXenes/polymer EMI shielding composites and their latest research progress.

COMPOSITES COMMUNICATIONS (2021)

Article Materials Science, Composites

Lightweight, flexible and highly sensitive segregated microcellular nanocomposite piezoresistive sensors for human motion detection

Zhonglei Ma et al.

Summary: The segregated microcellular nanocomposite piezoresistive sensors exhibit low mass density, good flexibility, high electrical conductivity, and high sensitivity, making them suitable for various applications including wearable electronics, artificial intelligence, human-computer interaction, and soft robotics.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

Article Nanoscience & Nanotechnology

Ultrathin, Lightweight, and Flexible CNT Buckypaper Enhanced Using MXenes for Electromagnetic Interference Shielding

Rongliang Yang et al.

Summary: In this study, an ultrathin, lightweight, and flexible carbon nanotube (CNT) buckypaper enhanced with MXenes (Ti3C2Tx) was successfully synthesized using a simple electrophoretic deposition process, demonstrating outstanding EMI shielding effectiveness for application in electronic devices and wireless communications.

NANO-MICRO LETTERS (2021)

Article Nanoscience & Nanotechnology

High-Performance and Reliable Silver Nanotube Networks for Efficient and Large-Scale Transparent Electromagnetic Interference Shielding

Chengming Jiang et al.

Summary: A high-performance silver nanotube network with stable and integrated interconnects is prepared using physical depositing technology, achieving one order higher conductivity than previous studies and maintaining <10% variation with random deformations. The manufactured transparent EMI shielding film, less than 1 mm in thickness, can be easily transferred to arbitrary surfaces with commercial EMI shielding effectiveness of about 35 dB, showing great potential for future flexible and transparent scenarios.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Nanoscience & Nanotechnology

Superhydrophobic and Flexible Silver Nanowire-Coated Cellulose Filter Papers with Sputter-Deposited Nickel Nanoparticles for Ultrahigh Electromagnetic Interference Shielding

Yanhu Zhan et al.

Summary: The study fabricates multifunctional papers by incorporating silver nanowires, sputter-deposited nickel nanoparticles, and a fluorine-containing coating onto cellulose filter papers, which exhibit superior EMI shielding performance, mechanical robustness, and chemical durability. The resultant papers show outstanding EMI shielding effectiveness, high hydrophobicity, and stability even after exposure to various harsh environments.

ACS APPLIED MATERIALS & INTERFACES (2021)

Review Chemistry, Multidisciplinary

Diverse Metal-Organic Framework Architectures for Electromagnetic Absorbers and Shielding

Jin-Cheng Shu et al.

Summary: Metal-organic frameworks (MOFs) and their derivatives have unique 3D microstructures and enhanced electromagnetic properties, showing vast potential in electromagnetic functional materials and devices, drawing significant attention from both domestic and foreign researchers. Research focuses on the design strategy of MOF monomers and systematically analyzing the electromagnetic response mechanism, with an emphasis on their applications in microwave absorption and electromagnetic interference shielding. A clear insight into the rapidly growing field is provided, along with a summary and prediction of current challenges and future research directions.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Chemistry, Physical

Smart MXene-Based Janus films with multi-responsive actuation capability and high electromagnetic interference shielding performances

Lulu Li et al.

Summary: Flexible, multi-responsive, and electrically conductive graphene oxide (GO)/MXene Janus film is fabricated with strong obscure interfaces, achieving multiple stimuli responses (humidity, light, and electricity) and high electromagnetic interference (EMI) shielding performances. The film offers an attractive EMI shielding effectiveness of 40 dB at a small thickness of 1.5 mu m, and can be used for smart EMI shielding curtain and stimuli-responsive EMI shielding system.

CARBON (2021)

Article Chemistry, Physical

Ti3C2Tx/rGO porous composite films with superior electromagnetic interference shielding performances

Yali Zhang et al.

Summary: The novel method of preparing Ti3C2Tx-based porous EMI shielding composite films with the assistance of graphene oxide resulted in dense surface and porous inside structure, leading to improved EMI shielding effectiveness. The Ti3C2Tx/rGO porous composite films showed superior thermal stability and electrical conductivity, with the potential for application in ultra-thin, light, and flexible EMI shielding materials.

CARBON (2021)

Article Engineering, Multidisciplinary

MOF-Guest complex derived Cu/C nanocomposites with multiple heterogeneous interfaces for excellent electromagnetic waves absorption

Yingzhi Jiao et al.

Summary: This study reports the synthesis of Cu/C nanocomposites by controlled pyrolysis of a MOF-guest complex, which exhibit excellent EMA performance due to the carbon network and multiple heterogeneous interfaces. The research provides a new idea for designing high-performance EMA nanocomposites by tuning electrical conductivity and interfacial polarization.

COMPOSITES PART B-ENGINEERING (2021)

Article Nanoscience & Nanotechnology

Lightweight, Flexible Cellulose-Derived Carbon Aerogel@Reduced Graphene Oxide/PDMS Composites with Outstanding EMI Shielding Performances and Excellent Thermal Conductivities

Ping Song et al.

Summary: By dissolving cotton in a NaOH/urea solution, cellulose aerogels were obtained and further processed to prepare cellulose carbon aerogels@reduced graphene oxide aerogels. The resulting composites showed excellent EMI shielding effectiveness, thermal stability, and thermal conductivity, making them promising for lightweight and flexible EMI shielding applications.

NANO-MICRO LETTERS (2021)

Article Chemistry, Physical

Highly conductive graphene film with high-temperature stability for electromagnetic interference shielding

Kai Pang et al.

Summary: The study presents a highly conductive copper chloride intercalated graphene film (GF-CuCl2) with high-temperature stability and excellent electrical conductivity for EMI shielding applications, exhibiting significantly improved electrical performance and enhanced shielding effectiveness.

CARBON (2021)

Review Chemistry, Multidisciplinary

Polymer-based EMI shielding composites with 3D conductive networks: A mini-review

Lei Wang et al.

Summary: Polymer-based EMI shielding materials, with their lightweight, high specific strength, and stable properties, have become the mainstream for addressing electromagnetic interference (EMI) issues. The construction of 3D conductive networks has proven to be an effective method for preparing these materials with excellent shielding effectiveness. Future research will focus on solving key scientific and technical issues and exploring the development trends and application prospects of polymer-based EMI shielding materials.

SUSMAT (2021)

Article Materials Science, Multidisciplinary

Modulating surficial oxygen vacancy of the VO2 nanostructure to boost its electromagnetic absorption performance

Siyao Cheng et al.

Summary: The study showed that tuning the surface oxygen vacancy of VO2 through VO2-NaBH4 grinding treatment can affect its electromagnetic absorption properties. The oxygen vacancy content is closely related to the electrical conductivity, and the performance can be adjusted by changing the mass ratio of VO2 and NaBH4.

JOURNAL OF MATERIALS CHEMISTRY C (2021)

Article Materials Science, Multidisciplinary

A TTF-TCNQ complex: an organic charge-transfer system with extraordinary electromagnetic response behavior

Lipeng Wu et al.

Summary: A nanostructural TTF-TCNQ complex was prepared and showed good electromagnetic absorption performance with filler-loading ratio impacting its effective bandwidth. An electronic structure, multi-polarization, and conductive network model was used to explain the electromagnetic response behavior of the complex.

JOURNAL OF MATERIALS CHEMISTRY C (2021)

Article Engineering, Environmental

Water-based conductive ink for highly efficient electromagnetic interference shielding coating

Li-Chuan Jia et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Article Nanoscience & Nanotechnology

Ultrastrong and Highly Conductive MXene-Based Films for High-Performance Electromagnetic Interference Shielding

Ji Liu et al.

ADVANCED ELECTRONIC MATERIALS (2020)

Article Chemistry, Physical

Advances in photocatalytic self-cleaning, superhydrophobic and electromagnetic interference shielding textile treatments

Esfandiar Pakdel et al.

ADVANCES IN COLLOID AND INTERFACE SCIENCE (2020)

Article Engineering, Environmental

A lightweight and conductive MXene/graphene hybrid foam for superior electromagnetic interference shielding

Zhimin Fan et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Article Engineering, Environmental

MXene(Ti3C2TX)/graphene/PDMS composites for multifunctional broadband electromagnetic interference shielding skins

Van-Tam Nguyen et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Article Engineering, Manufacturing

Fabrication and investigation on ternary heterogeneous MWCNT@TiO2-C fillers and their silicone rubber wave-absorbing composites

Jia Zhao et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)

Article Engineering, Manufacturing

Multilayer WPU conductive composites with controllable electro-magnetic gradient for absorption-dominated electromagnetic interference shielding

An Sheng et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)

Article Materials Science, Composites

In-situ grown hollow Fe3O4 onto graphene foam nanocomposites with high EMI shielding effectiveness and thermal conductivity

Haoming Fang et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2020)

Review Engineering, Electrical & Electronic

Thermally Conducting Polymer Composites with EMI Shielding: A review

Subhransu S. Pradhan et al.

JOURNAL OF ELECTRONIC MATERIALS (2020)

Article Materials Science, Multidisciplinary

Highly Robust, Flexible, and Large-Scale 3D-Metallized Sponge for High-Performance Electromagnetic Interference Shielding

Sen Lin et al.

ADVANCED MATERIALS TECHNOLOGIES (2020)

Review Chemistry, Multidisciplinary

2D MXenes for Electromagnetic Shielding: A Review

Aamir Iqbal et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Article Chemistry, Multidisciplinary

Scalable Manufacturing of Free-Standing, Strong Ti3C2Tx MXene Films with Outstanding Conductivity

Jizhen Zhang et al.

ADVANCED MATERIALS (2020)

Article Engineering, Multidisciplinary

Multifunctional MXene/natural rubber composite films with exceptional flexibility and durability

Wei Yang et al.

COMPOSITES PART B-ENGINEERING (2020)

Article Green & Sustainable Science & Technology

Honeycomb structural rGO-MXene/epoxy nanocomposites for superior electromagnetic interference shielding performance

Ping Song et al.

SUSTAINABLE MATERIALS AND TECHNOLOGIES (2020)

Review Materials Science, Multidisciplinary

The superior mechanical and physical properties of nanocarbon reinforced bulk composites achieved by architecture design - A review

Xiang Zhang et al.

PROGRESS IN MATERIALS SCIENCE (2020)

Article Materials Science, Multidisciplinary

Lightweight and robust rGO/sugarcane derived hybrid carbon foams with outstanding EMI shielding performance

Lei Wang et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)

Article Engineering, Manufacturing

Multifunctional sponges with flexible motion sensing and outstanding thermal insulation for superior electromagnetic interference shielding

Chaobo Liang et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)

Article Materials Science, Multidisciplinary

Materials for electromagnetic interference shielding

D. D. L. Chung

MATERIALS CHEMISTRY AND PHYSICS (2020)

Review Nanoscience & Nanotechnology

Graphene Foams for Electromagnetic Interference Shielding: A Review

Zhenxin Jia et al.

ACS APPLIED NANO MATERIALS (2020)

Article Nanoscience & Nanotechnology

Copper-Coated Reduced Graphene Oxide Fiber Mesh-Polymer Composite Films for Electromagnetic Interference Shielding

Mingxin Li et al.

ACS APPLIED NANO MATERIALS (2020)

Review Engineering, Multidisciplinary

A review of multifunctional polymer-matrix structural composites

D. D. L. Chung

COMPOSITES PART B-ENGINEERING (2019)

Article Materials Science, Composites

FeSiAl/metal core shell hybrid composite with high-performance electromagnetic interference shielding

Pradeep Sambyal et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2019)

Review Polymer Science

Electromagnetic Interference Shielding Polymers and Nanocomposites-A Review

Dawei Jiang et al.

POLYMER REVIEWS (2019)

Article Materials Science, Multidisciplinary

Electromagnetic interference shielding effectiveness of sputtered NiFe/Cu multi-layer thin film at high frequencies

JongHwan Park et al.

THIN SOLID FILMS (2019)

Article Engineering, Manufacturing

Fabrication and investigation on the PANI/MWCNT/thermally annealed graphene aerogel/epoxy electromagnetic interference shielding nanocomposites

Yiming Huangfu et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)

Review Materials Science, Multidisciplinary

Recent advances in carbon-based polymer nanocomposites for electromagnetic interference shielding

Hooman Abbasi et al.

PROGRESS IN MATERIALS SCIENCE (2019)

Article Engineering, Manufacturing

Superior electromagnetic interference shielding performances of epoxy composites by introducing highly aligned reduced graphene oxide films

Chaobo Liang et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)

Article Engineering, Multidisciplinary

Fabrication on the annealed Ti3C2Tx MXene/Epoxy nanocomposites for electromagnetic interference shielding application

Lei Wang et al.

COMPOSITES PART B-ENGINEERING (2019)

Review Polymer Science

Transparent polymer nanocomposites: An overview on their synthesis and advanced properties

Julien Loste et al.

PROGRESS IN POLYMER SCIENCE (2019)

Article Nanoscience & Nanotechnology

Solution-Processed Nonvolatile Organic Transistor Memory Based on Semiconductor Blends

Yonghan Park et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Article Materials Science, Composites

Modification of isotactic polypropylene by silica nanocapsules via melt blending method

Chao Liang et al.

POLYMER COMPOSITES (2018)

Review Engineering, Multidisciplinary

A review of porous lightweight composite materials for electromagnetic interference shielding

Ashish Kumar Singh et al.

COMPOSITES PART B-ENGINEERING (2018)

Article Engineering, Electrical & Electronic

Flexible and conductive PP/EPDM/Ni coated glass fiber composite for efficient electromagnetic interference shielding

Hongji Duan et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2018)

Article Engineering, Electrical & Electronic

Facile synthesis of polyaniline nanostructures with effective electromagnetic interference shielding performance

Munan Qiu et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2018)

Review Engineering, Manufacturing

Recent advances in electromagnetic interference shielding properties of metal and carbon filler reinforced flexible polymer composites: A review

Sowmya Sankaran et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)

Review Materials Science, Multidisciplinary

Electrically conductive polymer composites for smart flexible strain sensors: a critical review

Hu Liu et al.

JOURNAL OF MATERIALS CHEMISTRY C (2018)

Article Chemistry, Multidisciplinary

Nanocarbon/polyethylene composites with segregated conductive network for electromagnetic interference shielding

L. Vovchenko et al.

MOLECULAR CRYSTALS AND LIQUID CRYSTALS (2018)

Article Materials Science, Multidisciplinary

Repeatable, room-temperature-processed baroplastic-carbon nanotube composites for electromagnetic interference shielding

Zhi Lv et al.

JOURNAL OF MATERIALS CHEMISTRY C (2018)

Article Multidisciplinary Sciences

A highly stretchable, transparent, and conductive polymer

Yue Wang et al.

SCIENCE ADVANCES (2017)

Article Engineering, Manufacturing

Nanopolydopamine coupled fluorescent nanozinc oxide reinforced epoxy nanocomposites

Chaobo Liang et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)

Article Chemistry, Multidisciplinary

Lightweight and Anisotropic Porous MWCNT/WPU Composites for Ultrahigh Performance Electromagnetic Interference Shielding

Zhihui Zeng et al.

ADVANCED FUNCTIONAL MATERIALS (2016)

Article Chemistry, Multidisciplinary

CoNi@SiO2@TiO2 and CoNi@Air@TiO2 Microspheres with Strong Wideband Microwave Absorption

Qinghe Liu et al.

ADVANCED MATERIALS (2016)

Article Nanoscience & Nanotechnology

Compressible Graphene-Coated Polymer Foams with Ultralow Density for Adjustable Electromagnetic Interference (EMI) Shielding

Bin Shen et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Article Materials Science, Composites

3D network porous polymeric composites with outstanding electromagnetic interference shielding

Hui Wang et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2016)

Article Chemistry, Multidisciplinary

Intrinsically Conductive Polymer Fibers from Thermoplastic trans-1,4-Polyisoprene

Peng Han et al.

LANGMUIR (2016)

Article Multidisciplinary Sciences

Electromagnetic interference shielding with 2D transition metal carbides (MXenes)

Faisal Shahzad et al.

SCIENCE (2016)

Review Engineering, Electrical & Electronic

Compressive Sensing in Electromagnetics-A Review

Andrea Massa et al.

IEEE ANTENNAS AND PROPAGATION MAGAZINE (2015)

Article Materials Science, Multidisciplinary

Effect of texture on the electromagnetic shielding property of magnesium alloy

K. Song et al.

MATERIALS LETTERS (2015)

Review Nanoscience & Nanotechnology

Effective Approaches to Improve the Electrical Conductivity of PEDOT:PSS: A Review

Hui Shi et al.

ADVANCED ELECTRONIC MATERIALS (2015)

Article Chemistry, Multidisciplinary

Structured Reduced Graphene Oxide/Polymer Composites for Ultra-Efficient Electromagnetic Interference Shielding

Ding-Xiang Yan et al.

ADVANCED FUNCTIONAL MATERIALS (2015)

Article Chemistry, Multidisciplinary

pH-Responsive Cyanine-Grafted Graphene Oxide for Fluorescence Resonance Energy Transfer-Enhanced Photothermal Therapy

Miao Guo et al.

ADVANCED FUNCTIONAL MATERIALS (2015)

Review Materials Science, Multidisciplinary

Polymer/carbon based composites as electromagnetic interference (EMI) shielding materials

Jean-Michel Thomassin et al.

MATERIALS SCIENCE & ENGINEERING R-REPORTS (2013)

Article Materials Science, Multidisciplinary

Functionalized Graphene-PVDF Foam Composites for EMI Shielding

Varrla Eswaraiah et al.

MACROMOLECULAR MATERIALS AND ENGINEERING (2011)

Article Materials Science, Multidisciplinary

Chemical in situ polymerization of polypyrrole on bacterial cellulose nanofibers

D. Mueller et al.

SYNTHETIC METALS (2011)

Article Chemistry, Physical

Electromagnetic interference shielding of graphene/epoxy composites

Jiajie Liang et al.

CARBON (2009)

Review Polymer Science

EMI Shielding: Methods and Materials-A Review

S. Geetha et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2009)

Article Materials Science, Multidisciplinary

Polyaniline-MWCNT nanocomposites for microwave absorption and EMI shielding

Parveen Saini et al.

MATERIALS CHEMISTRY AND PHYSICS (2009)

Article Engineering, Manufacturing

Electromagnetic interference shielding effectiveness of carbon black and carbon fibre filled EVA and NR based composites

NC Das et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2000)