☆ 4.6 Article

Surface Treatment of Zn-Mn-Mg Alloys by Micro-Arc Oxidation in Silicate-Based Solutions with Different NaF Concentrations

MATERIALS (2021)

Related references

Note: Only part of the references are listed.

Article Engineering, Biomedical

Development of a high-strength Zn-Mn-Mg alloy for ligament reconstruction fixation

Jiang Sun et al.

Summary: A high-strength Zn-0.8Mn-0.4Mg alloy was developed for ligament reconstruction fixation, showing good biocompatibility and promising osteogenic effect. Compared to Ti6Al4V, the Zn alloy screws significantly accelerated new bone formation and promoted tendon-bone integration in ACL reconstruction, contributing to early joint function recovery and rehabilitation training.

ACTA BIOMATERIALIA (2021)

Add to Collection

Article Materials Science, Coatings & Films

Improved biodegradability of zinc and its alloys by sandblasting treatment

Ping Li et al.

Summary: The study investigated the effect of sandblasting surface treatment with two different sizes of Al2O3 particles on the degradation rates of zinc and its alloys. The results showed that the sandblasting treatment significantly increased the degradation rates, but the particle size was associated with cytotoxicity effects.

SURFACE & COATINGS TECHNOLOGY (2021)

Add to Collection

Review Chemistry, Physical

Functionalization treatment of micro-arc oxidation coatings on magnesium alloys: a review

Zhensheng Lin et al.

Summary: The review discusses the functionalization treatment of MAO coatings on Mg alloys, aiming to enhance their antibacterial properties, corrosion resistance, biocompatibility, and bioactivity. By incorporating antibacterial metallic elements and covering with biopolymer or calcium phosphate coatings, biofunctional MAO coatings with improved corrosion resistance can be achieved.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Review Chemistry, Physical

A review on wear-resistant coating with high hardness and high toughness on the surface of titanium alloy

Haiqiang Bai et al.

Summary: The design and development of high hardness, high toughness and wear-resistant coatings are of great significance for expanding the application of titanium alloy. Current research focuses on the design concept of multi-phase, multi-level and multi-scale hybrid reinforcement to achieve high-performance wear-resistant coatings.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Review Materials Science, Ceramics

Tribological mechanism of micro-arc oxidation coatings prepared by different electrolyte systems in artificial seawater

Huixia Guo et al.

Summary: Adding silicate can increase the density of the coating, and phosphate-aluminate ceramic layer exhibits the lowest wear rate in various environments. The friction coefficient and wear rate of MAO coating in seawater are lower than those in ambient air due to the boundary lubrication effect of seawater, with the presence of divalent metal salts making seawater more lubricous than other salt solutions.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Mechanical characteristics and in vitro degradation of biodegradable Zn-Al alloy

Cui Liu et al.

Summary: In this study, a Zn-5wt.%Al alloy tube was prepared, showing high elongation to failure and medium strength. The superplasticity of the alloy is attributed to its unique microstructure. Additionally, the extruded alloy exhibited a higher corrosion rate in the corrosion test.

MATERIALS LETTERS (2021)

Add to Collection

Review Chemistry, Physical

Protection of magnesium alloys: From physical barrier coating to smart self-healing coating

Dongdong Zhang et al.

Summary: Magnesium and its alloys have promising mechanical properties and biodegradability, making them potential candidates in industrial and biomedical fields. Surface modification is an effective way to prevent corrosion, with the necessity for smart self-healing capabilities in complex service environments. This article reviews recent advances in physical barrier coatings and smart self-healing coatings on magnesium alloys.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Chemistry, Physical

Surface Modification of Biomedical MgCa4.5 and MgCa4.5Gd0.5 Alloys by Micro-Arc Oxidation

Piotr Sakiewicz et al.

Summary: The research characterized the structure and corrosion properties of MgCa4.5(Gd-0.5) alloys treated by micro-arc oxidation (MAO), finding that the addition of Gd and different voltages during the MAO process influenced the coating structure and surface pores, resulting in higher corrosion susceptibility of MgCa4.5Gd0.5 alloys. The MgCa4.5 alloy with the MAO coating established at voltage 140 V demonstrated the best anticorrosion properties.

MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Synchronous Growth of Porous MgO and Half-Embedded Nano-Ru on a Mg Plate: A Monolithic Catalyst for Fast Hydrogen Production

Xiaoqing Cao et al.

Summary: The study developed a structured Ru/MgO catalyst with an on-off feature by growing nano-Ru-embedded MgO coating layer on a Mg substrate via instant high-temperature plasma oxidation. The monodisperse Ru nanoparticles with ultrasmall size demonstrated high catalytic activity for sodium borohydride hydrolysis, achieving a high hydrogen generation rate and excellent stability. The catalyst also showed potential for practical applications with the ability to accurately control hydrogen generation through on-off functionality.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Preparation of Coating on the Titanium Surface by Micro-Arc Oxidation to Improve Corrosion Resistance

Yulong Hu et al.

Summary: The study found that MAO treatment can significantly enhance the corrosion resistance of TA2. However, increasing the thickness of the MAO coating does not further improve the corrosion resistance. Additionally, due to the increase in effective surface area, the MAO treatment may enhance the cathode action of TA2, promoting the corrosion of more negative metals in a galvanic cell.

COATINGS (2021)

Add to Collection

Review Engineering, Biomedical

Recent research and progress of biodegradable zinc alloys and composites for biomedical applications: Biomechanical and biocorrosion perspectives

Humayun Kabir et al.

Summary: Biodegradable metals (BMs) are gradually degrading in vivo, with magnesium-based BMs undergoing the most clinical trials, iron-based BMs exhibiting slower degradation rates, and zinc-based BMs considered a new class with intermediate degradation rates. Further research is needed to validate the suitability of zinc-based BMs for biomedical applications.

BIOACTIVE MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Reactive pulsed DC magnetron sputtering deposition of vanadium oxide thin films: Role of pulse frequency on the film growth and properties

Xiang Dong et al.

Summary: This study explored the effects of pulse frequency on the properties of VOx films prepared by reactive pulsed DC magnetron sputtering. It was found that adjusting the pulse frequency can influence the microstructure, surface morphology, and composition of the films. The temperature-dependent electrical properties of the films can also be tailored for specific applications by adjusting the pulse frequency.

APPLIED SURFACE SCIENCE (2021)

Add to Collection

Article Chemistry, Physical

Textural evolution and improved ductility in Zn-0.2Mg-0.8Mn (wt%) alloys at different extrusion temperatures

Dongfang Lou et al.

Summary: By decreasing the extrusion temperature, Zn-0.2Mg-0.8Mn alloys exhibited fully dynamic recrystallization, with a texture transformation contributing to an increase in elongation. The refined grain size and second phases also contributed to the high yield strength of the alloy.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Biochemistry & Molecular Biology

Bioactivity Performance of Pure Mg after Plasma Electrolytic Oxidation in Silicate-Based Solutions

Yevheniia Husak et al.

Summary: The research aimed to develop a stable oxidative coating on Mg alloy using plasma electrolytic oxidation (PEO) in silicate-based solutions. The addition of Ca(OH)2 in the electrolyte was crucial for the formation of biocompatible oxide coatings with enhanced surface properties.

MOLECULES (2021)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Effect of NaOH concentration on microstructure and corrosion resistance of MAO coating on cast Al-Li alloy

Ying Qin et al.

Summary: Ceramic coating was prepared on cast Al-Cu-Li alloy by micro-arc oxidation in a silicate electrolyte solution with additives including Na2WO4 and NaOH. The addition of NaOH promoted the formation of oxides, increased layer thickness, and improved the corrosion resistance of the coated alloy. The best corrosion resistance was achieved with an alumina coating formed in the electrolyte containing 7 g/L NaOH.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2021)

Add to Collection

Article Chemistry, Physical

New Zn3Mg-xY Alloys: Characteristics, Microstructural Evolution and Corrosion Behavior

Catalin Panaghie et al.

Summary: Adding the third element yttrium to zinc-based alloys can significantly improve their mechanical properties and corrosion resistance, as well as increase microhardness and indentation Young Modulus. The formation of the YZn12 intermetallic phase elements with a more noble potential than pure zinc has been established, showing a correlation between the appearance of new yttrium phases and aggressive galvanic corrosion.

MATERIALS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Corrosion and wear resistance of micro-arc oxidation coating on glass microsphere reinforced Mg alloy composite

Lin Liu et al.

Summary: In this study, MAO coatings were prepared on a novel glass microsphere reinforced Mg alloy composite to retard degradation in Cl- containing liquid environment. The current density significantly influenced the thickness and structure of the coatings, subsequently impacting their properties. Suitable current density improved corrosion and wear resistance of the coatings, while excessive current density led to increased friction coefficient and deteriorated corrosion resistance.

JOURNAL OF MATERIALS SCIENCE (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of hydrogen peroxide on Cr oxide formation of additive manufactured CoCr alloys during plasma electrolytic polishing

Bosung Seo et al.

Summary: Hydrogen peroxide was used as a strong oxidizing agent to accelerate the oxidation of cobalt-chromium alloy during plasma electrolytic polishing, resulting in the growth of a chromium oxide layer. The increased thickness of the oxide film composed of only Cr2O3 was observed, indicating improved corrosion resistance due to decreased defects and increased charge transfer resistance.

MATERIALS LETTERS (2021)

Add to Collection

Article Materials Science, Coatings & Films

Effect of brush plating process variables on the microstructures of Cd and ZnNi coatings and hydrogen embrittlement

Priyadarshi Behera et al.

Summary: Evaluation of brush plated ZnNi coating as a replacement for Cd coating in repairing sacrificial coatings on high strength steel components reveals the importance of plating parameters, surface preparation, and anode type. The microstructure of the coating plays a crucial role in mitigating internal hydrogen embrittlement (IHE) risk. Controlled deposition voltage, surface treatment, and anode selection can effectively reduce the risk of IHE by manipulating the coating microstructure.

SURFACE & COATINGS TECHNOLOGY (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Elucidation of the thickness inside the niobium anodic oxide film and its effect on adhesion to polyimide film

Munenori Yoshida et al.

Summary: Niobium oxide films prepared via anodic oxidation exhibit various colors influenced by the applied voltage. This study aims to clarify the relationship between the oxidation state inside the anodized film and its thickness, and successfully anodized a flexible resin material, PI film.

VACUUM (2021)

Add to Collection

Article Chemistry, Physical

Plasma electrolytic oxidation of zinc alloy in a phosphate-aluminate electrolyte

C. Blawert et al.

APPLIED SURFACE SCIENCE (2020)

Add to Collection

Article Multidisciplinary Sciences

Alloying design of biodegradable zinc as promising bone implants for load-bearing applications

Hongtao Yang et al.

NATURE COMMUNICATIONS (2020)

Add to Collection

Article Materials Science, Biomaterials

Effect of ultrasonic micro-arc oxidation on the antibacterial properties and cell biocompatibility of Ti-Cu alloy for biomedical application

Jiali Hu et al.

MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2020)

Add to Collection

Article Chemistry, Physical

Investigating local corrosion behavior and mechanism of MAO coated 7075 aluminum alloy

Shengnan Wang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Add to Collection

Article Engineering, Biomedical

In vitro degradation and cytocompatibility of a low temperature in-situ grown self-healing Mg-Al LDH coating on MAO-coated magnesium alloy AZ31

Chang-Yang Li et al.

BIOACTIVE MATERIALS (2020)

Add to Collection

Article Materials Science, Coatings & Films

Functionalization of pure titanium MAO coatings by surface modifications for biomedical applications

Shu-Chuan Liao et al.

SURFACE & COATINGS TECHNOLOGY (2020)

Add to Collection

Article Chemistry, Physical

Bioactive Coatings Formed on Titanium by Plasma Electrolytic Oxidation: Composition and Properties

Dmitry V. Mashtalyar et al.

MATERIALS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of V2O5Additive on Micro-Arc Oxidation Coatings Fabricated on Magnesium Alloys with Different Loading Voltages

Zhanying Wang et al.

METALS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Comparative Studies on Degradation Behavior of Pure Zinc in Various Simulated Body Fluids

Xiao Liu et al.

JOM (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Improvement of biodegradable and antibacterial properties by solution treatment and micro-arc oxidation (MAO) of a magnesium alloy with a trace of copper

Xudong Yan et al.

CORROSION SCIENCE (2019)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Biodegradation Behavior of Coated As-Extruded Mg-Sr Alloy in Simulated Body Fluid

Ming-Chun Zhao et al.

ACTA METALLURGICA SINICA-ENGLISH LETTERS (2019)

Add to Collection

Review Engineering, Biomedical

Current status and perspectives of zinc-based absorbable alloys for biomedical applications

David Hernandez-Escobar et al.

ACTA BIOMATERIALIA (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Corrosion and Wear Resistance of Micro-Arc Oxidation Composite Coatings on Magnesium Alloy AZ31-The Influence of Inclusions of Carbon Spheres

Chang-Yang Li et al.

ADVANCED ENGINEERING MATERIALS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Degradation Behaviour of Mg0.6Ca and Mg0.6Ca2Ag Alloys with Bioactive Plasma Electrolytic Oxidation Coatings

Lara Moreno et al.

COATINGS (2019)

Add to Collection

Article Chemistry, Physical

Graphene oxide/waterborne polyurethane composites for fine pattern fabrication and ultrastrong ultraviolet protection cotton fabric via screen printing

Weihua Song et al.

APPLIED SURFACE SCIENCE (2019)

Add to Collection

Article Chemistry, Physical

Effect of alloy cations on corrosion resistance of LDH/MAO coating on magnesium alloy

Junfeng Chen et al.

APPLIED SURFACE SCIENCE (2019)

Add to Collection

Article Materials Science, Biomaterials

Formation Mechanism, Corrosion Behavior, and Cytocompatibility of Microarc Oxidation Coating on Absorbable High-Purity Zinc

Wei Yuan et al.

ACS BIOMATERIALS SCIENCE & ENGINEERING (2019)

Add to Collection

Article Chemistry, Physical

Abnormal thermal stability of sub-10 nm Au nanoparticles and their high catalytic activity

Xiaoqing Cao et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructure and properties of microarc oxidation coating formed on aluminum alloy with compound additives nano-TiO2 and nano-ZnO

Ting-Yi Lin et al.

RARE METALS (2018)

Add to Collection

Review Engineering, Biomedical

Zinc-based alloys for degradable vascular scent applications

Ehsan Mostaed et al.

ACTA BIOMATERIALIA (2018)

Add to Collection

Article Chemistry, Physical

Effect of cumulative strain on the microstructural and mechanical properties of Zn-0.02 wt%Mg alloy wires during room-temperature drawing process

Liqing Wang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

Add to Collection

Article Chemistry, Physical

Degradation mechanism of micro-arc oxidation coatings on biodegradable Mg-Ca alloys: The influence of porosity

Lan-Yue Cui et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Corrosion resistance of a superhydrophobic micro-arc oxidation coating on Mg-4Li-1Ca alloy

Lan-Yue Cui et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2017)

Add to Collection

Article Engineering, Biomedical

Evolution of the degradation mechanism of pure zinc stent in the one-year study of rabbit abdominal aorta model

Hongtao Yang et al.

BIOMATERIALS (2017)

Add to Collection

Article Materials Science, Coatings & Films

Formation and characterization of ZnO films on zinc substrate by plasma electrolytic oxidation

Stevan Stojadinovic et al.

SURFACE & COATINGS TECHNOLOGY (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Micro-alloying with Mn in Zn-Mg alloy for future biodegradable metals application

Xiwei Liu et al.

MATERIALS & DESIGN (2016)

Add to Collection

Article Chemistry, Analytical

Electrochemical behavior of zinc in KOH media at high voltage: Micro-arc oxidation of zinc

Emmanuel Rocca et al.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2015)

Add to Collection

Article Materials Science, Coatings & Films

Formation mechanism of a self-sealing pore micro-arc oxidation film on AM60 magnesium alloy

Kaihui Dong et al.

SURFACE & COATINGS TECHNOLOGY (2015)

Add to Collection

Article Materials Science, Ceramics

Fabrication and characterization of micro-arc oxidized fluoride containing titania films on Cp Ti

K. Venkateswarlu et al.

CERAMICS INTERNATIONAL (2013)

Add to Collection

Article Materials Science, Coatings & Films

Effect of additives on structure and corrosion resistance of plasma electrolytic oxidation coatings on AZ91D magnesium alloy in phosphate based electrolyte

Guo-Hua Lv et al.

SURFACE & COATINGS TECHNOLOGY (2010)

Add to Collection

© Peeref 2019-2024. All rights reserved.