Related references
Note: Only part of the references are listed.Effects of Nb/Ti additions and heat treatment on the microstructure evolution and hardness of as-cast and directionally solidified NiAl-Cr(Mo) alloy
Zhao Shang et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)
Influence of aging and HIP treatment on the structure and properties of NiAl-based turbine blades manufactured by laser powder bed fusion
Yu Yu Kaplanskii et al.
ADDITIVE MANUFACTURING (2020)
Effect of hot isostatic pressing on structure and properties of intermetallic NiAl-Cr-Mo alloy produced by selective laser melting
M. Khomutov et al.
INTERMETALLICS (2020)
Influence of heat treatment on the structure evolution and creep deformation behavior of a precipitation hardened B2-(Ni, Fe)Al alloy
Yu Yu Kaplanskii et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Oxidation behaviour of NiAl intermetallics with embedded Cr and Mo
Golnar Geramifard et al.
CORROSION SCIENCE (2020)
Reactive elements dependence of elastic properties and stacking fault energies of γ-Ni, γ′-Ni3Al and β-NiAl
Chengchao Hu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Progress in additive manufacturing on new materials: A review
Neng Li et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)
Microstructural evolution and phase transformation of Inconel 718 alloys fabricated by selective laser melting under different heat treatment
Peng Liu et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
Nanocrystalline NiAl intermetallic alloy with high hardness produced by mechanical alloying and hot-pressing consolidation
Marek Krasnowski et al.
ADVANCED POWDER TECHNOLOGY (2019)
Microstructure and mechanical properties of the (Fe,Ni)Al-based alloy produced by SLM and HIP of spherical composite powder
Yu Yu Kaplanskii et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
A comparison of traditional manufacturing vs additive manufacturing, the best method for the job
Tanisha Pereira et al.
DIGITAL MANUFACTURING TRANSFORMING INDUSTRY TOWARDS SUSTAINABLE GROWTH (2019)
NiAl based alloy produced by HIP and SLM of pre-alloyed spherical powders. Evolution of the structure and mechanical behavior at high temperatures
Yu. Yu. Kaplanskii et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
The structure and properties of pre-alloyed NiAl-Cr(Co,Hf) spherical powders produced by plasma rotating electrode processing for additive manufacturing
Yu Yu Kaplanskii et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2018)
Effects of Selective Laser Melting additive manufacturing parameters of Inconel 718 on porosity, microstructure and mechanical properties
K. Moussaoui et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Plasma Spheroidization of Micropowders of a Heat-Resistant Alloy Based on Nickel Monoaluminide
Yu. V. Tsvetkov et al.
DOKLADY CHEMISTRY (2018)
Influence of powder characteristics and additive manufacturing process parameters on the microstructure and mechanical behaviour of Inconel 625 fabricated by Selective Laser Melting
Christopher Pleass et al.
ADDITIVE MANUFACTURING (2018)
Light-weighting in aerospace component and system design
L. Zhu et al.
PROPULSION AND POWER RESEARCH (2018)
Fabrication of Narrow-Fraction Micropowders of NiAl-Based Refractory Alloy CompoNiAl-M5-3
V. V. Kurbatkina et al.
INTERNATIONAL JOURNAL OF SELF-PROPAGATING HIGH-TEMPERATURE SYNTHESIS (2018)
Self-propagating high-temperature synthesis of advanced materials and coatings
E. A. Levashov et al.
INTERNATIONAL MATERIALS REVIEWS (2017)
Topology Topology optimization and additive manufacturing: Comparison of conception methods using industrial codes
Yassine Saadlaoui et al.
JOURNAL OF MANUFACTURING SYSTEMS (2017)
Structure and properties of NiAl-Cr(Co,Hf) alloys prepared by centrifugal SHS casting. Part 1-Room temperature investigations
A. A. Zaitsev et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Structure and properties of NiAl-Cr(Co,Hf) alloys prepared by centrifugal SHS casting followed by vacuum induction remelting. Part 2 Evolution of the structure and mechanical behavior at high temperature
A. A. Zaitsev et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Industrial Additive Manufacturing: A manufacturing systems perspective
Daniel R. Eyers et al.
COMPUTERS IN INDUSTRY (2017)
The role of additive manufacturing in the era of Industry 4.0
Ugur M. Dilberoglu et al.
27TH INTERNATIONAL CONFERENCE ON FLEXIBLE AUTOMATION AND INTELLIGENT MANUFACTURING, FAIM2017 (2017)
Effect of Mo, Ta, and Re on high-temperature oxidation behavior of minor HI doped beta-NiAl alloy
Baohong Han et al.
CORROSION SCIENCE (2016)
Effect of heat treatment on the microstructure and elevated temperature tensile property of Fe-doped NiAl-Cr(Mo)-(Hf,Dy) eutectic alloy
Lei Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Microstructure, fracture toughness and compressive property of as-cast and directionally solidified NiAl-based eutectic composite
Lei Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Investigation into the influence of the remelting temperature on the structural heredity of alloys fabricated by centrifugal SHS metallurgy
V. V. Sanin et al.
RUSSIAN JOURNAL OF NON-FERROUS METALS (2016)
Selective laser melting (SLM) and topology optimization for lighter aerospace componentes
Miguel Seabra et al.
XV PORTUGUESE CONFERENCE ON FRACTURE, PCF 2016 (2016)
The microstructure and ferroelectric property of Nd-doped multiferroic ceramics Bi0.85Nd0.15FeO3
Shizhou Pu et al.
CERAMICS INTERNATIONAL (2015)
Effect of Re content on elastic properties of B2 NiAl from ab initio calculations
A. V. Ponomareva et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
Microstructure evolution and enhancement of fracture toughness of NiAl-Cr(Mo)-(Hf,Dy) alloy with a small addition of Fe during heat treatment
Lei Wang et al.
SCRIPTA MATERIALIA (2014)
Microstructure characteristics and compressive properties of NiAl-based multiphase alloy during heat treatments
L. Y. Sheng et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
First-principles study of NiAl microalloyed with Sc, Y, La and Nd
Jun-Qi He et al.
COMPUTATIONAL MATERIALS SCIENCE (2010)
Microstructural evolution and mechanical properties of new multi-phase NiAl-based alloy during heat treatments
Xie Yi et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2010)
Effect of O impurity on structure and mechanical properties of NiAl intermetallics: A first-principles study
Xue-Lan Hu et al.
INTERMETALLICS (2009)
Oxidation resistance of a Zr-doped NiAl coating thermochemically deposited on a nickel-based superalloy
S. Hamadi et al.
SURFACE & COATINGS TECHNOLOGY (2009)
New generation of Ni-based superalloys designed on the basis of first-principles calculations
I. M. Razumovskii et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Intermetallics: Why is it so difficult to introduce them in gas turbine engines?
Alain Lasalmonie
INTERMETALLICS (2006)
Tensile properties and microstructure of in situ NiAl-Cr (Zr) eutectic composite
JT Guo et al.
COMPOSITE STRUCTURES (2003)
Ductility and fracture toughness issues related to implementation of NiAl for gas turbine applications
R Darolia
INTERMETALLICS (2000)
Elevated temperature compressive behavior of cast NiAl-9Mo(1Hf) eutectic alloys
RS Chen et al.
MATERIALS LETTERS (2000)
Plasticity in multiphase intermetallics
A Misra et al.
INTERMETALLICS (2000)