☆ 4.6 Article

Design of V-Substituted TiFe-Based Alloy for Target Pressure Range and Easy Activation

MATERIALS (2021)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

Understanding first cycle hydrogenation properties of Ti-Fe-Zr ternary alloys

Mohammad Faisal et al.

Summary: The study confirms that Zr-added TiFe alloy is easily activated at room temperature, forming ternary phases that aid hydrogen storage. These ternary phases can store 1.8-1.9 wt% of hydrogen, demonstrating their potential as hydrogen storage materials.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Add to Collection

Article Chemistry, Physical

Activation of Ti-Fe-Cr alloys containing identical AB2 fractions

Hayoung Kim et al.

Summary: TiFe-based alloys with a secondary AB(2) phase can address the activation issue, leading to improved practical application potential. Adjusting the Cr concentration in the Ti-Fe-Cr alloys can enable activation at room temperature and optimize reversible capacity.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Chemistry, Physical

Tailoring the equilibrium hydrogen pressure of TiFe via vanadium substitution

Jee Yun Jung et al.

Summary: The equilibrium hydrogen pressure of titanium iron (TiFe) alloy can be tailored by alloying with vanadium, with different effects depending on whether vanadium replaces Ti or Fe sublattices. This highlights the significance of vanadium as a versatile alloying element that modifies the hydrogen storage property of TiFe.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Chemistry, Physical

Effect of Cr addition on room temperature hydrogenation of TiFe alloys

Jee Yun Jung et al.

Summary: The effect of the AB2 (Ti(Cr, Fe)2) phase on the hydrogenation properties of Ti-Fe-Cr alloys was discussed. Increasing the Cr content led to an increase in the fraction of the Ti(Cr, Fe)2 phase, improving hydrogenation kinetics. However, an increase in the fraction of the Ti(Cr, Fe)2 phase resulted in a decrease in total hydrogen storage capacity.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Density functional theory study on the role of ternary alloying elements in TiFe-based hydrogen storage alloys

Won-Seok Ko et al.

Summary: The study investigated the role of additional ternary alloying elements on the performance of stationary TiFe-based hydrogen storage alloys through first-principles density functional theory calculations. The research focused on the formation enthalpies of hydrides and several physical properties, and proposed candidate alloying elements to maximize grain boundary embrittlement for enhanced initial activation of TiFe-based hydrogen storage alloys.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Add to Collection

Article Chemistry, Physical

Fundamental hydrogen storage properties of TiFe-alloy with partial substitution of Fe by Ti and Mn

Erika Michela Dematteis et al.

Summary: TiFe intermetallic compound is extensively studied due to its low cost, good volumetric hydrogen density, and the ability to tailor hydrogenation thermodynamics through elemental substitution. Increasing titanium content and substituting manganese can improve hydrogen storage performance, with titanium-rich alloys showing enhanced storage capacities as long as a limited amount of beta-Ti is formed.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of Fe substitution by Mn and Cr on first hydrogenation kinetics of air-exposed TiFe-based hydrogen storage alloy

Ki Beom Park et al.

Summary: This study investigated the effects of substituting Fe with Mn and Cr on the microstructure and first hydrogenation kinetics of a TiFe-based hydrogen storage alloy. Thermodynamic calculations and microstructure analysis were used to predict phase formation behaviors and observe trends in the first hydrogenation kinetics. It was found that both the microstructure and the percentage/composition of Laves phases in the alloys significantly influenced the first hydrogenation kinetics.

MATERIALS CHARACTERIZATION (2021)

Add to Collection

Article Engineering, Chemical

Study of the Microstructural and First Hydrogenation Properties of TiFe Alloy with Zr, Mn and V as Additives

Abhishek Kumar Patel et al.

Summary: Adding Zr + V or Zr + V + Mn to TiFe alloy can improve its microstructure and hydrogen storage properties, promoting the occurrence of the first hydrogenation. The presence of secondary phases similar to Ti2Fe acts as a gateway for hydrogen, resulting in fast hydrogenation and high capacity in the alloy. The rate-limiting step in the hydrogenation process is found to be 3D growth, diffusion controlled with decreasing interface velocity.

PROCESSES (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Substitutional effects in TiFe for hydrogen storage: a comprehensive review

Erika M. Dematteis et al.

Summary: This work provides a comprehensive review of chemical substitution in TiFe-based compounds for guiding compound design and materials selection in current and future hydrogen storage applications, with a focus on manganese substitution. Mono- and multi-substituted compounds modify TiFe thermodynamics and are beneficial for many hydrogenation properties.

MATERIALS ADVANCES (2021)

Add to Collection

Article Chemistry, Physical

Effect of chromium, manganese and yttrium on microstructure and hydrogen storage properties of TiFe-based alloy

Tai Yang et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)

Add to Collection

Article Chemistry, Physical

Hydrogen storage properties of TiFe-based ternary mechanical alloys with cobalt and niobium. A thermochemical approach

E. A. Berdonosova et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)

Add to Collection

Article Thermodynamics

Experimental investigation of phase equilibria in the Ti-Fe-Zr system

Lijun Zeng et al.

CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY (2018)

Add to Collection

Article Thermodynamics

Hydrogenation improvement of TiFe by adding ZrMn2

Peng Lv et al.

ENERGY (2017)

Add to Collection

Article Chemistry, Physical

Effects of Ce on the hydrogen storage properties of TiFe0.9Mn0.1 alloy

Haiyan Leng et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)

Add to Collection

Article Physics, Applied

First hydrogenation enhancement in TiFe alloys for hydrogen storage

Catherine Gosselin et al.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2017)

Add to Collection

Article Chemistry, Physical

Hydrogen storage properties of Ti0.95FeZr0.05, TiFe0.95Zr0.05 and TiFeZr0.05 alloys

Peng Lv et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)

Add to Collection

Article Chemistry, Physical

Effect of Zr, Ni and Zr7Ni10 alloy on hydrogen storage characteristics of TiFe alloy

Pragya Jain et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2015)

Add to Collection

Article Chemistry, Physical

Effects of Co introduction on hydrogen storage properties of Ti-Fe-Mn alloys

Haiqin Qu et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2015)

Add to Collection

Article Chemistry, Physical

Hydrogenation Properties of TiFe Doped with Zirconium

Catherine Gosselin et al.

MATERIALS (2015)

Add to Collection

Article Chemistry, Physical

Mechanical alloying of nanocrystalline intermetallic compound TiFe doped by aluminum and chromium

V. Yu Zadorozhnyy et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2014)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Phase equilibria in the Fe-Ti-V system

Blaise Massicot et al.

INTERNATIONAL JOURNAL OF MATERIALS RESEARCH (2010)

Add to Collection

Article Chemistry, Physical

Improvement of the hydrogen storage properties of Ti-Cr-V-Fe BCC alloy by Ce addition

X. P. Liu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2009)

Add to Collection

Article Chemistry, Physical

Effect of Ce on the structure and hydrogen storage properties of V55Ti22.5Cr16.1Fe6.4

Yigang Yan et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2007)

Add to Collection

Article Chemistry, Physical

Hydrogen storage properties of TixFe+y wt.% La and its use in metal hydride hydrogen compressor

Xinhua Wang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2006)

Add to Collection

Article Chemistry, Physical

Hydrogen storage properties of FeTi1.3 plus x wt%Mm (x=0.0, 1.5, 3.0, 4.5, 6.0) hydrogen storage alloys

JX Ma et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.