Related references
Note: Only part of the references are listed.Recent Trends in the Use of Pectin from Agro-Waste Residues as a Natural-Based Biopolymer for Food Packaging Applications
Cristina Mellinas et al.
MATERIALS (2020)
FDM 3D Printing of Polymers Containing Natural Fillers: A Review of their Mechanical Properties
Valentina Mazzanti et al.
POLYMERS (2019)
Three-dimensional printing of poly(lactic acid) bio-based composites with sugarcane bagasse fiber: Effect of printing orientation on tensile performance
Hao Liu et al.
POLYMERS FOR ADVANCED TECHNOLOGIES (2019)
Effect of protective coatings on the water absorption and mechanical properties of 3D printed PLA
Carlos M. S. Vicente et al.
FRATTURA ED INTEGRITA STRUTTURALE (2019)
Towards the design of high-performance plant fibre composites
Alain Bourmaud et al.
PROGRESS IN MATERIALS SCIENCE (2018)
Investigation of ABS-rice straw composite feedstock filament for FDM
Mohammed Ali Osman et al.
RAPID PROTOTYPING JOURNAL (2018)
Cork-PLA composite filaments for fused deposition modelling
Fugen Daver et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2018)
Composites from renewable and sustainable resources: Challenges and innovations
Amar K. Mohanty et al.
SCIENCE (2018)
Polylactic acid-agave fiber biocomposites produced by rotational molding: A comparative study with compression molding
Erick Omar Cisneros-Lopez et al.
ADVANCES IN POLYMER TECHNOLOGY (2018)
Effect of Agave Fiber Surface Treatment on the Properties of Polyethylene Composites Produced by Dry-Blending and Compression Molding
E. O. Cisneros-Lopez et al.
POLYMER COMPOSITES (2017)
Effect of agave fiber content in the thermal and mechanical properties of green composites based on polyhydroxybutyrate or poly(hydroxybutyrate-co-hydroxyvalerate)
Erika V. Torres-Tello et al.
INDUSTRIAL CROPS AND PRODUCTS (2017)
Designing of PLA scaffolds for bone tissue replacement fabricated by ordinary commercial 3D printer
Ales Gregor et al.
JOURNAL OF BIOLOGICAL ENGINEERING (2017)
Additive manufacturing of PLA structures using fused deposition modelling: Effect of process parameters on mechanical properties and their optimal selection
J. M. Chacon et al.
MATERIALS & DESIGN (2017)
Characterization of residual stress and deformation in additively manufactured ABS polymer and composite specimens
Wei Zhang et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2017)
Coffee grounds as filler for pectin: Green composites with competitive performances dependent on the UV irradiation
Vincenzo Alessandro Cataldo et al.
CARBOHYDRATE POLYMERS (2017)
Development and Application of Wood Flour-Filled Polylactic Acid Composite Filament for 3D Printing
Yubo Tao et al.
MATERIALS (2017)
Production and 3D printing processing of bio-based thermoplastic filament
Eleni Gkartzou et al.
MANUFACTURING REVIEW (2017)
Effect of Coupling Agent Content and Water Absorption on the Mechanical Properties of Coir-Agave Fibers-Reinforced Polyethylene Hybrid Composites
Aida A. Perez-Fonseca et al.
POLYMER COMPOSITES (2016)
Bleached extruder chemi-mechanical pulp fiber-PLA composites: Comparison of mechanical, thermal, and rheological properties with those of wood flour-PLA bio-composites
Zhaozhe Yang et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2016)
Effect of thermal annealing on the mechanical and thermal properties of polylactic acid-cellulosic fiber biocomposites
A. A. Perez-Fonseca et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2016)
Interfacial mechanical behavior of 3D printed ABS
Daniel P. Cole et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2016)
Development of rapid tooling using fused deposition modeling: a review
Kamaljit Singh Boparai et al.
RAPID PROTOTYPING JOURNAL (2016)
Influence of Different Treated Cellulose Fibers on the Mechanical and Thermal Properties of Poly(lactic acid)
Atul P. Johari et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2016)
Mechanical behaviour of ABS: An experimental study using FDM and injection moulding techniques
Michael Dawoud et al.
JOURNAL OF MANUFACTURING PROCESSES (2016)
3D printing of wood fibre biocomposites: From mechanical to actuation functionality
A. Le Duigou et al.
MATERIALS & DESIGN (2016)
Three-dimensional printing of continuous-fiber composites by in-nozzle impregnation
Ryosuke Matsuzaki et al.
SCIENTIFIC REPORTS (2016)
Experimental Investigations of Process Parameters Influence on Rheological Behavior and Dynamic Mechanical Properties of FDM Manufactured Parts
Omar Ahmed Mohamed et al.
MATERIALS AND MANUFACTURING PROCESSES (2016)
Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling
Fuda Ning et al.
COMPOSITES PART B-ENGINEERING (2015)
Mechanical and degradation properties of successive alkali treated completely biodegradable sisal fiber reinforced poly lactic acid composites
Gunti Rajesh et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2015)
Structure-mechanical property relationship in fused deposition modelling
H. Rezayat et al.
MATERIALS SCIENCE AND TECHNOLOGY (2015)
Recent advances in 3D printing of biomaterials
Helena N. Chia et al.
JOURNAL OF BIOLOGICAL ENGINEERING (2015)
Agave Americana Leaf Fibers
Ashish Hulle et al.
FIBERS (2015)
Polylactic acid (PLA) biocomposites reinforced with coir fibres: Evaluation of mechanical performance and multifunctional properties
Yu Dong et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)
Thermo-Mechanical and Morphological Properties of Short Natural Fiber Reinforced Poly (Lactic Acid) Biocomposite: Effect of Fiber Treatment
A. K. M. Moshiul Alam et al.
FIBERS AND POLYMERS (2014)
Development and characterization of PLA-based green composites: A review
Pramendra Kumar Bajpai et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2014)
Injection Molded Self-Hybrid Composites Based on Polypropylene and Natural Fibers
A. A. Perez-Fonseca et al.
POLYMER COMPOSITES (2014)
A review of melt extrusion additive manufacturing processes: I. Process design and modeling
Brian N. Turner et al.
RAPID PROTOTYPING JOURNAL (2014)
Morphology and Properties of Injection Molded Solid and Microcellular Polylactic Acid/Polyhydroxybutyrate-Valerate (PLA/PHBV) Blends
Haibin Zhao et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2013)
Structural characteristics of fused deposition modeling polycarbonate material
Walter Castro Smith et al.
POLYMER TESTING (2013)
Green composites from sustainable cellulose nanofibrils: A review
H. P. S. Abdul Khalil et al.
CARBOHYDRATE POLYMERS (2012)
Properties of thermoplastic starch from cassava bagasse and cassava starch and their blends with poly (lactic acid)
Eliangela de M. Teixeira et al.
INDUSTRIAL CROPS AND PRODUCTS (2012)
Comparison of Polylactic Acid/Kenaf and Polylactic Acid/Rise Husk Composites: The Influence of the Natural Fibers on the Mechanical, Thermal and Biodegradability Properties
A. A. Yussuf et al.
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2010)
Poly(lactic acid) modifications
Rahul M. Rasal et al.
PROGRESS IN POLYMER SCIENCE (2010)
Tequila vinasses: generation and full scale treatment processes
Alberto Lopez-Lopez et al.
REVIEWS IN ENVIRONMENTAL SCIENCE AND BIO-TECHNOLOGY (2010)
Effect of fiber surface-treatments on the properties of laminated biocomposites from poly(lactic acid) (PLA) and kenaf fibers
Masud S. Huda et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2008)
Biodegradation of poly(lactic acid)/starch/coir biocomposites under controlled composting conditions
R. Iovino et al.
POLYMER DEGRADATION AND STABILITY (2008)
Water absorption and enzymatic degradation of poly(lactic acid)/rice starch composites
GH Yew et al.
POLYMER DEGRADATION AND STABILITY (2005)
Sustainable bio-composites from renewable resources: Opportunities and challenges in the green materials world
AK Mohanty et al.
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2002)
Effect of layer orientation on mechanical properties of rapid prototyped samples
OS Es-Said et al.
MATERIALS AND MANUFACTURING PROCESSES (2000)
Share Paper
