Related references
Note: Only part of the references are listed.Fly-Ash-Based Geopolymers Reinforced by Melamine Fibers
Barbara Kozub et al.
MATERIALS (2021)
Investigation on Flexural Behavior of Geopolymer-Based Carbon Textile/Basalt Fiber Hybrid Composite
Chi Hiep Le et al.
POLYMERS (2021)
From casting to 3D printing geopolymers: A proof of concept
Vera Voney et al.
CEMENT AND CONCRETE RESEARCH (2021)
Mechanical and fracture properties of geopolymer concrete with basalt fiber using digital image correlation
Yamin Wang et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2021)
Rheological characterization of 3D printable geopolymers
Navid Ranjbar et al.
CEMENT AND CONCRETE RESEARCH (2021)
Foamed Geopolymer Composites with the Addition of Glass Wool Waste
Barbara Kozub et al.
MATERIALS (2021)
Printing Parameter Requirements for 3D Printable Geopolymer Materials Prepared from Industrial Side Streams
Qaisar Munir et al.
MATERIALS (2021)
Geopolymer Foams-Will They Ever Become a Viable Alternative to Popular Insulation Materials?-A Critical Opinion
Michal Lach
MATERIALS (2021)
Long-Term Properties of Different Fiber Reinforcement Effect on Fly Ash-Based Geopolymer Composite
Rihards Gailitis et al.
CRYSTALS (2021)
Cost Analysis of Various Factors for Geopolymer 3D Printing of Construction Products in Factories and on Construction Sites
Qaisar Munir et al.
RECYCLING (2021)
Mechanical and fracture properties of steel fiber-reinforced geopolymer concrete
Peng Zhang et al.
SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS (2021)
An Application Review of Fiber-Reinforced Geopolymer Composite
Sneha Samal et al.
FIBERS (2021)
Life cycle assessment of 3D printing geo-polymer concrete: An ex-ante study
Yue Yao et al.
JOURNAL OF INDUSTRIAL ECOLOGY (2020)
Fiber-reinforced geopolymer composites: A review
Navid Ranjbar et al.
CEMENT & CONCRETE COMPOSITES (2020)
FLEXURAL PERFORMANCE EVALUATION OF VARIOUS CARBON FIBRE FABRIC REINFORCED GEOPOLYMER COMPOSITE
Hiep Le Chi et al.
CERAMICS-SILIKATY (2020)
Gypsum, Geopolymers, and Starch-Alternative Binders for Bio-Based Building Materials: A Review and Life-Cycle Assessment
Girts Bumanis et al.
SUSTAINABILITY (2020)
Geopolymers reinforced by short and long fibres - innovative materials for additive manufacturing
Kinga Korniejenko et al.
CURRENT OPINION IN CHEMICAL ENGINEERING (2020)
The Fabrication of Geopolymer Foam Composites Incorporating Coke Dust Waste
Buczkowska Katarzyna et al.
PROCESSES (2020)
Effect of microwave heating on interlayer bonding and buildability of geopolymer 3D concrete printing
Shravan Muthukrishnan et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Evaluation of Hybrid Melamine and Steel Fiber Reinforced Geopolymers Composites
Patrycja Bazan et al.
MATERIALS (2020)
Effect of phosphoric acid content on the microstructure and compressive strength of phosphoric acid-based metakaolin geopolymers
Li Gao et al.
HELIYON (2020)
Mine Tailings Geopolymers as a Waste Management Solution for A More Sustainable Habitat
Helena Paiva et al.
SUSTAINABILITY (2019)
Printability, accuracy and strength of geopolymer made using powder-based 3D printing for construction applications
Ming Xia et al.
AUTOMATION IN CONSTRUCTION (2019)
Investigation on the fracture mechanism of homogenized micro-crack crushing technology for portland cement concrete pavement rehabilitation
Wenjie Li et al.
AIP ADVANCES (2019)
Extrusion and rheology characterization of geopolymer nanocomposites used in 3D printing
Biranchi Panda et al.
COMPOSITES PART B-ENGINEERING (2019)
Sustainable geopolymer using lithium concentrate residues
A. Karrech et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Micro-cable reinforced geopolymer composite for extrusion-based 3D printing
Guowei Ma et al.
MATERIALS LETTERS (2019)
Influence of some additives on the properties of fly ash based geopolymer cement mortars
Mukesh Kumar et al.
SN APPLIED SCIENCES (2019)
A Comparative Study of Mechanical Properties of Fly Ash-Based Geopolymer Made by Casted and 3D Printing Methods
K. Korniejenko et al.
4TH INTERNATIONAL CONFERENCE ON INNOVATIVE MATERIALS, STRUCTURES AND TECHNOLOGIES (IMST 2019) (2019)
Influence of curing conditions on mechanical and fracture properties of alkali activated slag concrete
H. Simonova et al.
4TH INTERNATIONAL CONFERENCE ON INNOVATIVE MATERIALS, STRUCTURES AND TECHNOLOGIES (IMST 2019) (2019)
Mechanical properties of geopolymers reinforced with carbon and aramid long fibers
M. Lach et al.
DEVELOPMENT OF ECO-FRIENDLY COMPOSITE MATERIALS BASED ON GEOPOLYMER MATRIX AND REINFORCED WITH WASTE FIBERS (2019)
There is no Plan B for dealing with the climate crisis
Raymond Pierrehumbert
BULLETIN OF THE ATOMIC SCIENTISTS (2019)
One-part alkali-activated materials: A review
Tero Luukkonen et al.
CEMENT AND CONCRETE RESEARCH (2018)
Metakaolin-based geopolymer mortars with different alkaline activators (Na+ and K+)
Thais da Silva Rocha et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Printable properties of cementitious material containing copper tailings for extrusion based 3D printing
Guowei Ma et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Measurement of tensile bond strength of 3D printed geopolymer mortar
Biranchi Panda et al.
MEASUREMENT (2018)
Behaviour of Carbon and Basalt Fibres Reinforced Fly Ash Geopolymer at Elevated Temperatures
Faiz Shaikh et al.
INTERNATIONAL JOURNAL OF CONCRETE STRUCTURES AND MATERIALS (2018)
Vision of 3D printing with concrete - Technical, economic and environmental potentials
Geert De Schutter et al.
CEMENT AND CONCRETE RESEARCH (2018)
Effect of Polypropylene Fibre Addition on Properties of Geopolymers Made by 3D Printing for Digital Construction
Behzad Nematollahi et al.
MATERIALS (2018)
Properties of 3D-printed fiber-reinforced Portland cement paste
Manuel Hambach et al.
CEMENT & CONCRETE COMPOSITES (2017)
Structural built-up of cement-based materials used for 3D-printing extrusion techniques
A. Perrot et al.
MATERIALS AND STRUCTURES (2016)
Effect of activator concentration on the strength, ITZ and drying shrinkage of fly ash/slag geopolymer concrete
B. Singh et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
A method for inter-yarn friction coefficient calculation for plain wave of aramid fibers
Hector Lopez-Galvez et al.
MECHANICS RESEARCH COMMUNICATIONS (2016)
Method of formulating geopolymer for 3D printing for construction applications
Ming Xia et al.
MATERIALS & DESIGN (2016)
Fiber reinforcement during 3D printing
Susanne Christ et al.
MATERIALS LETTERS (2015)
A review on alkaline activation: new analytical perspectives
A. Palomo et al.
MATERIALES DE CONSTRUCCION (2014)
Technical and commercial progress in the adoption of geopolymer cement
Jannie S. J. van Deventer et al.
MINERALS ENGINEERING (2012)
Influence of Fiber Characteristics and Manufacturing Process on the Structure and Properties of Aramid Paper
Huifang Zhao et al.
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2012)
Preparation of phosphoric acid-based porous geopolymers
Liu Le-ping et al.
APPLIED CLAY SCIENCE (2010)
Effects of fiber length on mechanical properties and fracture behavior of short carbon fiber reinforced geopolymer matrix composites
Tiesong Lin et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Geopolymerisation kinetics. 1. In situ energy-dispersive X-ray diffractometry
John L. Provis et al.
CHEMICAL ENGINEERING SCIENCE (2007)
The effect of alkali and Si/Al ratio on the development of mechanical properties of metakaolin-based geopolymers
P. Duxson et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2007)
The role played by the reactive alumina content in the alkaline activation of fly ashes
A Fernández-Jiménez et al.
MICROPOROUS AND MESOPOROUS MATERIALS (2006)
The geopolymerisation of alumino-silicate minerals
H Xu et al.
INTERNATIONAL JOURNAL OF MINERAL PROCESSING (2000)
Share Paper
