Adsorption of cationic methylene blue dye using microwave-assisted activated carbon derived from acacia wood: Optimization and batch studies

This study assesses the performance of optimized acacia wood-based activated carbon (AWAC) as an adsorbent for methylene blue (MB) dye removal in aqueous solution. AWAC was prepared via a physicochemical activation process that consists of potassium hydroxide (KOH) treatment, followed by carbon dioxide (CO2) gasification under microwave heating. By using response surface methodology (RSM), the optimum preparation conditions of radiation power, radiation time, and KOH-impregnation ratio (IR) were determined to be 360 W, 4.50 min, and 0.90 g/g respectively, which resulted in 81.20 mg/g of MB dye removal and 27.96% of AWAC's yield. Radiation power and IR had a major effect on MB dye removal while radiation power and radiation time caused the greatest impact on AWAC's yield. BET surface area, mesopore surface area, and pore volume of optimized AWAC were found to be 1045.56 m(2)/g, 689.77 m(2)/g, and 0.54 cm(3)/g, respectively. Adsorption of MB onto AWAC followed Langmuir and pseudo-second order for isotherm and kinetic studies respectively, with a Langmuir monolayer adsorption capacity of 338.29 mg/g. Mechanism studies revealed that the adsorption process was controlled by film diffusion mechanism and indicated to be thermodynamically exothermic in nature. (C) 2021 The Author(s). Published by Elsevier B.V. on behalf of King Saud University.

Automated summary

This study evaluated the performance of optimized acacia wood-based activated carbon as an adsorbent for methylene blue dye removal in aqueous solution. Under the optimal preparation conditions, the activated carbon showed high removal efficiency and yield, with radiation power, radiation time, and KOH-impregnation ratio significantly affecting the adsorption performance.