Related references
Note: Only part of the references are listed.Determining oxidation states of transition metals in molten salt corrosion using electron energy loss spectroscopy
Kaustubh Bawane et al.
SCRIPTA MATERIALIA (2021)
Designing Multiscale Porous Metal by Simple Dealloying with 3D Morphological Evolution Mechanism Revealed via X-ray Nano-tomography
Lijie Zou et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
Unveiling 3D Morphology of Multiscale Micro-Nanosilver Sintering for Advanced Electronics Manufacturing by Ptychographic X-ray Nanotomography
Yu-Chung Lin et al.
ADVANCED ENGINEERING MATERIALS (2020)
Simulation of coarsening in two-phase systems with dissimilar mobilities
W. Beck Andrews et al.
COMPUTATIONAL MATERIALS SCIENCE (2020)
Dealloying Kinetics of AgAu Nanoparticles by In Situ Liquid-Cell Scanning Transmission Electron Microscopy
Pan Liu et al.
NANO LETTERS (2020)
A three-dimensional Monte Carlo model for coarsening kinetics of the bi-continuous system via surface diffusion and its application to nanoporous gold
Gaeun Son et al.
SCRIPTA MATERIALIA (2020)
Revealing 3D Morphological and Chemical Evolution Mechanisms of Metals in Molten Salt by Multimodal Microscopy
Arthur Ronne et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
Excellent corrosion resistance of 316 stainless steel in purified NaCl-MgCl2 eutectic salt at high temperature
Lili Guo et al.
CORROSION SCIENCE (2020)
PyXAS - an open-source package for 2D X-ray near-edge spectroscopy analysis
Mingyuan Ge et al.
JOURNAL OF SYNCHROTRON RADIATION (2020)
Mechanism of coarsening and deformation behavior of nanoporous Cu with varying relative density
Lijie He et al.
JOURNAL OF MATERIALS RESEARCH (2020)
Effect of transport mechanism on the coarsening of bicontinuous structures: A comparison between bulk and surface diffusion
W. Beck Andrews et al.
PHYSICAL REVIEW MATERIALS (2020)
Redox Potential Measurements of Cr(II)/Cr Ni(II)/Ni and Mg(II)/Mg in Molten MgCl2-KCl-NaCl Mixture
Mingyang Zhang et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)
In situ STEM/SEM study of the coarsening of nanoporous gold
A. A. El-Zoka et al.
ACTA MATERIALIA (2019)
Hot corrosion behaviour of nickel-cobalt-based alloys in a lithium molten salt
Soo-Haeng Cho et al.
CORROSION SCIENCE (2019)
Molten chloride salts for next generation concentrated solar power plants: Mitigation strategies against corrosion of structural materials
Wenjin Ding et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2019)
Kinetics of electrochemical dissolution of metals in porous media
Matteo Stefanoni et al.
NATURE MATERIALS (2019)
Topology evolution during coarsening of nanoscale metal network structures
Yong Li et al.
PHYSICAL REVIEW MATERIALS (2019)
Corrosion mechanisms in molten salt thermal energy storage for concentrating solar power
S. Bell et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2019)
Development of porous FeCo by liquid metal dealloying: Evolution of porous morphology and effect of interaction between ligaments and melt
Soo-Hyun Joo et al.
MATERIALS & DESIGN (2019)
Evolution of steady-state material properties during catalysis: Oxidative coupling of methanol over nanoporous Ag0.03Au0.97
Branko Zugic et al.
JOURNAL OF CATALYSIS (2019)
Self-assembled porous metal-intermetallic nanocomposites via liquid metal dealloying
Bernard Gaskey et al.
ACTA MATERIALIA (2019)
Environmentally Friendly Zr-Based Conversion Nanocoatings for Corrosion Inhibition of Metal Surfaces Evaluated by Multimodal X-ray Analysis
Xiaoyang Liu et al.
ACS APPLIED NANO MATERIALS (2019)
Enabling chloride salts for thermal energy storage: implications of salt purity
J. Matthew Kurley et al.
RSC ADVANCES (2019)
Bi-continuous pattern formation in thin films via solid-state interfacial dealloying studied by multimodal characterization
Chonghang Zhao et al.
MATERIALS HORIZONS (2019)
Extent of dissolution determines the structural similarity between dealloyed nanoporous materials synthesized at unrelated dissolution conditions
Paramita Haldar et al.
ACTA MATERIALIA (2018)
On the topological, morphological, and microstructural characterization of nanoporous metals
Erica T. Lilleodden et al.
MRS BULLETIN (2018)
Pattern formation during electrochemical and liquid metal dealloying
Ian McCue et al.
MRS BULLETIN (2018)
Corrosion in the molten fluoride and chloride salts and materials development for nuclear applications
Shaoqiang Guo et al.
PROGRESS IN MATERIALS SCIENCE (2018)
Three-dimensional bicontinuous nanoporous materials by vapor phase dealloying
Zhen Lu et al.
NATURE COMMUNICATIONS (2018)
One-minute nano-tomography using hard X-ray full-field transmission microscope
Mingyuan Ge et al.
APPLIED PHYSICS LETTERS (2018)
Effects of alloying elements on the corrosion behavior of Ni-based alloys in molten NaCl-KCl-MgCl(2 )salt at different temperatures
Hua Sun et al.
CORROSION SCIENCE (2018)
Decoupling the role of stress and corrosion in the intergranular cracking of noble-metal alloys
N. Badwe et al.
NATURE MATERIALS (2018)
Corrosion behavior of Ni-based alloys in molten NaCl-CaCl2-MgCl2 eutectic salt for concentrating solar power
Bo Liu et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2017)
Thermophysical properties of Ni-containing single-phase concentrated solid solution alloys
K. Jin et al.
MATERIALS & DESIGN (2017)
Three-Dimensional Morphological and Chemical Evolution of Nanoporous Stainless Steel by Liquid Metal Dealloying
Chonghang Zhao et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Mechanical properties of nanoporous gold in tension
Nilesh Badwe et al.
ACTA MATERIALIA (2017)
Connectivity-list based characterization of 3D nanoporous structures formed via selective dissolution
Paramita Haldar et al.
ACTA MATERIALIA (2017)
Repeatable and Transferable Processing for Electron Tomography: An Open Platform for Visualization and Reconstruction of 3D Materials
Robert Hovden et al.
MICROSCOPY AND MICROANALYSIS (2016)
Nanoporous Gold-Testing Macro-scale Samples to Probe Small-scale Mechanical Behavior
Nadiia Mameka et al.
MATERIALS RESEARCH LETTERS (2016)
Kinetics and morphological evolution of liquid metal dealloying
Ian Mccue et al.
ACTA MATERIALIA (2016)
Dealloying and Dealloyed Materials
Ian McCue et al.
ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 46 (2016)
Evolution of a bicontinuous nanostructure via a solid-state interfacial dealloying reaction
Takeshi Wada et al.
SCRIPTA MATERIALIA (2016)
Atomically Resolved Dealloying of Structurally Ordered Pt Nanoalloy as an Oxygen Reduction Reaction Electrocatalyst
Andraz Pavlisic et al.
ACS CATALYSIS (2016)
Topology-generating interfacial pattern formation during liquid metal dealloying
Pierre-Antoine Geslin et al.
NATURE COMMUNICATIONS (2015)
Tortuosity characterization of 3D microstructure at nano-scale for energy storage and conversion materials
Yu-chen Karen Chen-Wiegart et al.
JOURNAL OF POWER SOURCES (2014)
The molten salt reactor (MSR) in generation IV: Overview and perspectives
Jerome Serp et al.
PROGRESS IN NUCLEAR ENERGY (2014)
TomoPy: a framework for the analysis of synchrotron tomographic data
Doga Guersoy et al.
JOURNAL OF SYNCHROTRON RADIATION (2014)
Hierarchical Nested-Network Nanostructure by Dealloying
Zhen Qi et al.
ACS NANO (2013)
In situ imaging of dealloying during nanoporous gold formation by transmission X-ray microscopy
Yu-chen Karen Chen-Wiegart et al.
ACTA MATERIALIA (2013)
3D morphological evolution of porous titanium by x-ray micro- and nano-tomography
Yu-chen Karen Chen-Wiegart et al.
JOURNAL OF MATERIALS RESEARCH (2013)
Mechanisms and Morphology Evolution in Dealloying
Qing Chen et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2013)
Spontaneous evolution of bicontinuous nanostructures in dealloyed Li-based systems
Qing Chen et al.
NATURE MATERIALS (2013)
Structural evolution of nanoporous gold during thermal coarsening
Yu-chen Karen Chen-Wiegart et al.
ACTA MATERIALIA (2012)
Speciation of nickel (II) chloride complexes in hydrothermal fluids: In situ XAS study
Yuan Tian et al.
CHEMICAL GEOLOGY (2012)
Thermal properties of nanoporous gold
Anatoly I. Frenkel et al.
PHYSICAL REVIEW B (2012)
Coarsening by network restructuring in model nanoporous gold
Kedarnath Kolluri et al.
ACTA MATERIALIA (2011)
Dealloying by metallic melt
Takeshi Wada et al.
MATERIALS LETTERS (2011)
Mechanism of Coarsening and Bubble Formation in High-Genus Nanoporous Metals
J. Erlebacher
PHYSICAL REVIEW LETTERS (2011)
The topology and morphology of bicontinuous interfaces during coarsening
Y. Kwon et al.
EPL (2009)
Hard Materials with Tunable Porosity
Jonah Erlebacher et al.
MRS BULLETIN (2009)
Nanoporous Metals by Alloy Corrosion: Formation and Mechanical Properties
Joerg Weissmueller et al.
MRS BULLETIN (2009)
Contradicting Geometrical Concepts in Pore Size Analysis Attained with Electron Microscopy and Mercury Intrusion
Beat Muench et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2008)
Length scales in alloy dissolution and measurement of absolute interfacial free energy
J. Rugolo et al.
NATURE MATERIALS (2006)
Size effects on the mechanical behavior of nanoporous Au
Juergen Biener et al.
NANO LETTERS (2006)
ATHENA, ARTEMIS, HEPHAESTUS:: data analysis for X-ray absorption spectroscopy using IFEFFIT
B Ravel et al.
JOURNAL OF SYNCHROTRON RADIATION (2005)
Fabrication and surface functionalization of nanoporous gold by electrochemical alloying/dealloying of Au-Zn in an ionic liquid, and the self-assembly of L-cysteine monolayers
JF Huang et al.
ADVANCED FUNCTIONAL MATERIALS (2005)
Mechanism of growth, composition and structure of oxide films formed on ferrous alloys in molten salt electrolytes - a review
T Tzvetkoff et al.
MATERIALS CHEMISTRY AND PHYSICS (2004)
An atomistic description of dealloying - Porosity evolution, the critical potential, and rate-limiting behavior
J Erlebacher
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2004)
The dealloying critical potential
K Sieradzki et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2002)
Evolution of nanoporosity in dealloying
J Erlebacher et al.
NATURE (2001)
Direct electrochemical reduction of titanium dioxide to titanium in molten calcium chloride
GZ Chen et al.
NATURE (2000)