Related references
Note: Only part of the references are listed.Effect of locking mode on mechanical properties and failure behavior of CFRP/Al electromagnetic riveted joint
Hao Jiang et al.
COMPOSITE STRUCTURES (2021)
Fatigue behavior of carbon fibre reinforced plastic and aluminum single-lap adhesive joints after the transverse pre-impact
Xinglong Liu et al.
INTERNATIONAL JOURNAL OF FATIGUE (2021)
On failure mechanisms in CFRP/Al adhesive joints after hygrothermal aging degradation following by mechanical tests
Gang Zheng et al.
THIN-WALLED STRUCTURES (2021)
Optimizaition for formability of plain woven carbon fiber fabrics
Zhen Wang et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)
On lateral compression of circular aluminum, CFRP and GFRP tubes
Shunfeng Li et al.
COMPOSITE STRUCTURES (2020)
Quasi-static bending and transverse crushing behaviors for hat-shaped composite tubes made of CFRP, GFRP and their hybrid structures
Dongdong Chen et al.
COMPOSITE STRUCTURES (2020)
On crashworthiness design of hybrid metal-composite structures
Zhen Wang et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)
Characterization of initial and subsequent yield behaviors of closed-cell aluminum foams under multiaxial loadings
Erdong Wang et al.
COMPOSITES PART B-ENGINEERING (2020)
Durability and mechanical behavior of CFRP/Al structural joints in accelerated cyclic corrosion environments
Yiwei Chen et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2020)
On low-velocity impact response of foam-core sandwich panels
Xintao Huo et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)
A novel failure criterion based upon forming limit curve for thermoplastic composites
Zhen Wang et al.
COMPOSITES PART B-ENGINEERING (2020)
Experimental study on residual properties of carbon fibre reinforced plastic (CFRP) and aluminum single-lap adhesive joints at different strain rates after transverse pre-impact
Xinglong Liu et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
Failure mechanisms in carbon fiber reinforced plastics (CFRP)/aluminum (Al) adhesive bonds subjected to low-velocity transverse pre-impact following by axial post-tension
Xinglong Liu et al.
COMPOSITES PART B-ENGINEERING (2019)
Review on adhesive joints and their application in hybrid composite structures
G. Jeevi et al.
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2019)
On the Potential Static Strength of Hybrid (Bolted/Bonded) Lap Joints with Functionally Graded Adhesives
Eric Paroissien et al.
AIAA JOURNAL (2019)
Mechanical behavior and progressive failure analysis of riveted, bonded and hybrid joints with CFRP-aluminum dissimilar materials
Yiwei Chen et al.
THIN-WALLED STRUCTURES (2019)
Flexural performance and cost efficiency of carbon/basalt/glass hybrid FRP composite laminates
Dongdong Chen et al.
THIN-WALLED STRUCTURES (2019)
Experimental and theoretical investigations on axial crushing of aluminum foam-filled grooved tube
Ru-yang Yao et al.
COMPOSITE STRUCTURES (2019)
Low velocity impact behavior of interlayer hybrid composite laminates with carbon/glass/basalt fibres
Dongdong Chen et al.
COMPOSITES PART B-ENGINEERING (2019)
Review on techniques to improve the strength of adhesive joints with composite adherends
X. Shang et al.
COMPOSITES PART B-ENGINEERING (2019)
A new multi-objective discrete robust optimization algorithm for engineering design
Guangyong Sun et al.
APPLIED MATHEMATICAL MODELLING (2018)
Evolution of mechanical properties of flexible epoxy adhesives under cyclic loading and its effects on composite hybrid bolted/bonded joint design
Gyu-Hyeong Lim et al.
COMPOSITE STRUCTURES (2018)
On the static strength of aluminium and carbon fibre aircraft lap joint repairs
Siddharth Pitta et al.
COMPOSITE STRUCTURES (2018)
Tensile and fatigue properties of single lap joints of aluminium alloy/glass fibre reinforced composites fabricated with different joining methods
M. Mariam et al.
COMPOSITE STRUCTURES (2018)
On fracture characteristics of adhesive joints with dissimilar materials - An experimental study using digital image correlation (DIC) technique
Guangyong Sun et al.
COMPOSITE STRUCTURES (2018)
Mechanical properties of joints in 5052 aluminum made with adhesive bonding and mechanical fasteners
B. Ufferman et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2018)
Comparison on damage tolerance of scarf and stepped-lap bonded composite joints under quasi-static loading
Chao Wu et al.
COMPOSITES PART B-ENGINEERING (2018)
Failure behaviour of the adhesive layer and angle ply composite adherends in single lap joints: A numerical study
Murat Demiral et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2018)
Mechanical properties and fatigue behavior of electromagnetic riveted lap joints influenced by shear loading
Guangyao Li et al.
JOURNAL OF MANUFACTURING PROCESSES (2017)
Fatigue and failure mechanism in carbon fiber reinforced plastics/aluminum alloy single lap joint produced by electromagnetic riveting
Hao Jiang et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2017)
Investigation of bolted/bonded composite joint behaviour using design of experiments
Pedro Lopez-Cruz et al.
COMPOSITE STRUCTURES (2017)
Damage analysis of composite-aluminium adhesively-bonded single-lap joints
T. E. A. Ribeiro et al.
COMPOSITE STRUCTURES (2016)
The structural analysis and strength evaluation of the rivet nut joint for composite repair
Seong-Yoon Yoo et al.
COMPOSITE STRUCTURES (2016)
Experimental and finite element studies of thin bonded and hybrid carbon fibre double lap joints used in aircraft structures
Nabil M. Chowdhury et al.
COMPOSITES PART B-ENGINEERING (2016)
Hybrid bonded-fastened joints and their application in composite structures: A general review
Kobye Bodjona et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2016)
Static and fatigue testing thin riveted, bonded and hybrid carbon fiber double lap joints used in aircraft structures
Nabil Chowdhury et al.
COMPOSITE STRUCTURES (2015)
MECHANICAL BEHAVIOR AND FAILURE OF RIVETING JOINTS IN TENSILE AND SHEAR TESTS
J. Mucha et al.
STRENGTH OF MATERIALS (2015)
Innovative and Highly Productive Joining Technologies for Multi-Material Lightweight Car Body Structures
G. Meschut et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2014)
On the mechanical behavior of BFRP to aluminum AA6086 mixed joints
V. Fiore et al.
COMPOSITES PART B-ENGINEERING (2013)
Stress distribution in adhesively-bonded joints and the loading capacity of hybrid joints of car body steels for the automotive industry
Bartosz Bartczak et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2013)
Analysis of the mechanical performance of hybrid (SPR/bonded) single-lap joints between CFRP panels and aluminum blanks
G. Di Franco et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2013)
The experimental analysis of the double joint type change effect on the joint destruction process in uniaxial shearing test
Jacek Mucha et al.
THIN-WALLED STRUCTURES (2013)
Synergistic inhibition effect of sodium oleate and sodium vanadate on the corrosion of pure aluminum in NaCl solution
Yuhong Zhou et al.
ADVANCES IN ENVIRONMENTAL SCIENCE AND ENGINEERING, PTS 1-6 (2012)
Crashworthiness design for functionally graded foam-filled thin-walled structures
Guangyong Sun et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Analysis of bolted-bonded composite single-lap joints under combined in-plane and transverse loading
A. Barut et al.
COMPOSITE STRUCTURES (2009)
Improving performance of GFRP/aluminum single lap joints using bolted/co-cured hybrid method
Ryosuke Matsuzaki et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2008)
Effect of variations in the riveting process on the quality of riveted joints
S. Hossein Cheraghi
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2008)
Application of dielectric analysis for monitoring the cure process of phenol formaldehyde adhesive
Milan Sernek et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2007)
Analytical two-dimensional model of a hybrid (bolted/bonded) single-lap joint
Eric Paroissien et al.
JOURNAL OF AIRCRAFT (2007)
Failure of carbon composite-to-aluminum joints with combined mechanical fastening and adhesive bonding
Jin-Hwe Kweon et al.
COMPOSITE STRUCTURES (2006)
Quasi-static strength and fatigue life of hybrid (bonded/bolted) composite single-lap joints
G Kelly
COMPOSITE STRUCTURES (2006)
Load transfer in hybrid (bonded/bolted) composite single-lap joints
G Kelly
COMPOSITE STRUCTURES (2005)
Stress and failure analysis of mechanically fastened joints in composite laminates
ML Dano et al.
COMPOSITE STRUCTURES (2000)
Share Paper
