4.7 Article

Mechanical performance and damage mechanisms of thin rectangular carbon/Elium® tubular thermoplastic composites under flexure and low-velocity impact

Related references

Note: Only part of the references are listed.
Article Engineering, Mechanical

Performance comparison of resin-infused thermoplastic and thermoset 3D fabric composites under impact loading

S. Z. H. Shah et al.

Summary: The impact performance of a novel 3D-FRC composite with a resin-infused acrylic thermoplastic matrix was evaluated and compared with thermoset-based 3D-FRC. Results showed that thermoplastic-based 3D-FRC exhibited higher impact load-bearing capacity and less damage area in single impact tests, and better structural integrity and less damaged area in recurring strike tests. The superior impact resistance of thermoplastic-based 3D-FRC is attributed to their higher interlaminar fracture toughness, tougher fiber-matrix interface, matrix ductility, and unique failure mechanism of yarn straining.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

Article Engineering, Civil

Low-velocity impact response of tube-reinforced honeycomb sandwich structure

Yunwei Zhang et al.

Summary: By filling the honeycomb holes with metallic tubes, the load carrying capacity and impact resistance of the honeycomb sandwich structure are improved, leading to a more uniform distribution of stresses and deformations. The tube-reinforced structure absorbs impact energy more quickly and significantly reduces front face-sheet deformation.

THIN-WALLED STRUCTURES (2021)

Article Materials Science, Textiles

Manufacturing Optimization and Experimental Investigation of Ex-situ Core-shell Particles Toughened Carbon/Elium® Thermoplastic Composites

Somen K. Bhudolia et al.

Summary: The study investigates the effect of core-shell particles in novel carbon/Elium (R) composites, emphasizing on static indentation, carbon fiber reinforcement, and load drop reduction. Microscopic examination shows that core-shell particles help in spreading damage evenly and absorbing more energy during static-indentation. The addition of core-shell particles also increases the loss factor or damping in thick ply Elium (R) composite and thin ply epoxy composite, offering improvements in quasi-static impact and dynamic mechanical tests.

FIBERS AND POLYMERS (2021)

Article Chemistry, Physical

Investigation on Ultrasonic Welding Attributes of Novel Carbon/Elium® Composites

Somen K. Bhudolia et al.

MATERIALS (2020)

Article Materials Science, Multidisciplinary

Fatigue response of ultrasonically welded carbon/Elium® thermoplastic composites

Somen K. Bhudolia et al.

MATERIALS LETTERS (2020)

Article Engineering, Multidisciplinary

Damping, impact and flexural performance of novel carbon/Elium® thermoplastic tubular composites

Somen K. Bhudolia et al.

COMPOSITES PART B-ENGINEERING (2020)

Article Engineering, Manufacturing

A methodology for determining preform compaction in bladder-assisted resin transfer molding with elastomeric bladders for tubular composite parts

Christian Schillfahrt et al.

INTERNATIONAL JOURNAL OF MATERIAL FORMING (2019)

Article Materials Science, Multidisciplinary

Microscale finite element analysis for predicting effects of air voids on mechanical properties of single fiber bundle in composites

Hongyong Jiang et al.

JOURNAL OF MATERIALS SCIENCE (2019)

Article Materials Science, Textiles

Experimental and Microscopic Investigation on Mechanical Performance of Textile Spread-tow Thin Ply Composites

Somen Kumar Bhudolia et al.

FIBERS AND POLYMERS (2019)

Article Green & Sustainable Science & Technology

Fusion joining of thermoplastic composite wind turbine blades: Lap-shear bond characterization

Robynne E. Murray et al.

RENEWABLE ENERGY (2019)

Article Materials Science, Multidisciplinary

Mechanical and thermomechanical characterisation of vacuum-infused thermoplastic- and thermoset-based composites

Winifred Obande et al.

MATERIALS & DESIGN (2019)

Article Engineering, Manufacturing

Mechanical properties and failure modes of hybrid fiber reinforced polymer composites with a novel liquid thermoplastic resin, Elium®

M. E. Kazemi et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)

Article Engineering, Multidisciplinary

Analysis of fracture toughness in mode II and fractographic study of composites based on Elium® 150 thermoplastic matrix

Lorena Cristina Miranda Barbosa et al.

COMPOSITES PART B-ENGINEERING (2019)

Proceedings Paper Engineering, Multidisciplinary

Three-point Bend Test to Determine the Mechanical Behavior of the Tubes Used in Water Supply Networks

Dumitru Daniel Scarlatescu et al.

12TH INTERNATIONAL CONFERENCE INTERDISCIPLINARITY IN ENGINEERING (INTER-ENG 2018) (2019)

Article Materials Science, Composites

Flexural characteristics of novel carbon methylmethacrylate composites

Somen K. Bhudolia et al.

COMPOSITES COMMUNICATIONS (2019)

Article Materials Science, Composites

Improvement of Progressive Damage Model to Predicting Crashworthy Composite Corrugated Plate

Yiru Ren et al.

APPLIED COMPOSITE MATERIALS (2018)

Article Engineering, Multidisciplinary

Transverse impact response of filament wound basalt composite tubes

Iqbal Mokhtar et al.

COMPOSITES PART B-ENGINEERING (2017)

Article Materials Science, Textiles

On Energy Absorption Capacity, Flexural and Dynamic Properties of Flax/Epoxy Composite Tubes

Libo Yan et al.

FIBERS AND POLYMERS (2014)

Article Materials Science, Multidisciplinary

Damage evolution in glass/epoxy composites engineered using core-shell microparticles under impact loading

Mubarak Ali et al.

JOURNAL OF MATERIALS SCIENCE (2013)

Article Materials Science, Multidisciplinary

Impact Damage Resistance of CFRP Prepreg Laminates with Dispersed CSP Particles into Ply Interfaces

Mubarak Ali et al.

INTERNATIONAL JOURNAL OF DAMAGE MECHANICS (2012)

Article Polymer Science

Impact Behavior of Hybrid Composite Plates

Metin Sayer et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2010)

Review Engineering, Manufacturing

Reactive processing of textile fiber-reinforced thermoplastic composites - An overview

K. van Rijswijk et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)