Enhancing surface characteristics of additively manufactured fiber reinforced thermoplastic mold using thermoset coating with ceramic particles

A commercially available thermoset polymer liquid coating reinforced with ceramic particles was applied on the surface of an additively manufactured carbon fiber reinforced thermoplastic composites to improve its surface characteristics for composite mold application. The mold demonstrated herein was fabricated via material extrusion additive manufacturing (MEAM) and served for the fabrication of autoclave-cured laminated composite structures. Test specimens used in this investigation were additively manufactured with Polyphenylene Sulfide (PPS) reinforced with 50% by weight of carbon fiber. Following the printing process, the surface of the specimens was finished in a numerical controlled milling machine. The effect of machining parameters such as the surface speed and the chip load on the surface roughness was investigated. The machining parameters that yielded the lowest surface roughness were used to machine the specimens used in this work. Following machining, an approximately 10 mu m thick coating based on a thermoset resin reinforced with ceramic particles was applied on the surface of flat specimens via the liquid spray coating technique and cured at elevated temperature. Surface characteristics relevant to molds used in composite manufacturing such as surface roughness, abrasion resistance, hardness, friction, and vacuum integrity were assessed for the coated and noncoated specimens. The results showed that the coating decreased the abrasion wear index by about 89%, decreased the vacuum loss by about 95%, and lowered the static and kinetic friction by about 40% and 38%, respectively, compared to the non-coated printed material. However, the coated surface did not improve hardness nor roughness of the surface.

Automated summary

In this study, a commercially available thermoset polymer liquid coating reinforced with ceramic particles was applied to the surface of additively manufactured carbon fiber reinforced thermoplastic composites to improve surface characteristics. Results showed that the coating significantly reduced abrasion wear and friction, as well as decreased vacuum loss, but did not improve hardness or roughness of the surface.