Related references
Note: Only part of the references are listed.A review of structural health monitoring of bonded structures using electromechanical impedance spectroscopy
A. Francisco G. Tenreiro et al.
STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL (2022)
Electromagnetic pulse-induced acoustic testing and the pulsed guided wave propagation in composite/metal adhesive bonding specimens
Hongjun Sun et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2021)
A novel nonlinear Lamb wave based approach for detection of multiple disbonds in adhesive joints
Sachin Kumar et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2021)
Time-fractional dependence of the shear force in some beam type problems with negative Young modulus
Daniel Cao Labora et al.
APPLIED MATHEMATICAL MODELLING (2020)
Structural adhesive bonding characterization using guided Lamb waves and the vertical modes
Camille Gauthier et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2020)
Structural health monitoring of an adhesively bonded CFRP aircraft fuselage by ultrasonic Lamb Waves
J. Weiland et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART G-JOURNAL OF AEROSPACE ENGINEERING (2020)
Non-linear Lamb Waves for Locating Defects in Single-Lap Joints
Francesco Nicassio et al.
FRONTIERS IN BUILT ENVIRONMENT (2020)
Prospects and limitations of eddy current shearography for non-destructive testing of adhesively bonded structural joints
Igor Kryukov et al.
JOURNAL OF ADHESION (2019)
Structural vibration-based classification and prediction of delamination in smart composite laminates using deep learning neural network
Asif Khan et al.
COMPOSITES PART B-ENGINEERING (2019)
Optimization of sensor placement for structural health monitoring: a review
Wieslaw Ostachowicz et al.
STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL (2019)
Effect of hygrothermal aging on the quasi-static behaviour of CFRP joints varying the overlap length
J. J. M. Machado et al.
COMPOSITE STRUCTURES (2019)
Reflection and transmission characteristics of Lamb waves at an adhesive lap joint of plates
Naoki Mori et al.
JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA (2019)
Lamb-Wave-Based Multistage Damage Detection Method Using an Active PZT Sensor Network for Large Structures
M. Saqib Hameed et al.
SENSORS (2019)
A Study of Sensor Placement Optimization Problem for Guided Wave-Based Damage Detection
Rohan Soman et al.
SENSORS (2019)
Improved Damage Localization and Quantification of CFRP Using Lamb Waves and Convolution Neural Network
Chenhui Su et al.
IEEE SENSORS JOURNAL (2019)
Novel method for true guided waves spectral characteristics estimation using a logistic function fit and nonlinear least square algorithm
Piotr Kijanka et al.
STRUCTURAL CONTROL & HEALTH MONITORING (2019)
Wave Frequency Effects on Damage Imaging in Adhesive Joints Using Lamb Waves and RMS
Erwin Wojtczak et al.
MATERIALS (2019)
Elastic waves interference for the analysis of disbonds in single lap joints
F. Nicassio et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)
Guided Wave-Convolutional Neural Network Based Fatigue Crack Diagnosis of Aircraft Structures
Liang Xu et al.
SENSORS (2019)
Damage Identification in Composites Based on Hilbert Energy Spectrum and Lamb Wave Tomography Algorithm
Chenhui Su et al.
IEEE SENSORS JOURNAL (2019)
Finite difference model of wave motion for structural health monitoring of single lap joints
Stefano Carrino et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2019)
Open Guided Waves: online platform for ultrasonic guided wave measurements
Jochen Moll et al.
STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL (2019)
Shear-lag solution for excitation, sensing, and time reversal of Lamb waves for structural health monitoring
Santosh Kapuria et al.
JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2018)
Integrity monitoring of adhesively bonded joints via an electromechanical impedance-based approach
Yitao Zhuang et al.
STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL (2018)
Lamb wave-based detection of a controlled disbond in a lap joint
Wern Hann Ong et al.
STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL (2018)
Interfacial Adhesion-Strength Detection of Structural Silicone Sealant for Hidden Frame-Supported Glass Curtain Wall Based on Nonlinear Ultrasonic Lamb Wave
Xiaobin Hong et al.
JOURNAL OF AEROSPACE ENGINEERING (2018)
Quantitative characterization of disbonds in multilayered bonded composites using laser ultrasonic guided waves
Kuanshuang Zhang et al.
NDT & E INTERNATIONAL (2018)
Damage Imaging in LambWave-Based Inspection of Adhesive Joints
Magdalena Rucka et al.
APPLIED SCIENCES-BASEL (2018)
A New Structural Health Monitoring Strategy Based on PZT Sensors and Convolutional Neural Network
Mario A. de Oliveira et al.
SENSORS (2018)
The analysis of kissing bonds in adhesive joints
C. Jeenjitkaew et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2017)
Lamb waves characterization of adhesion levels in aluminum/epoxy bi-layers with different cohesive and adhesive properties
Camille Gauthier et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2017)
Generic Framework of Sensor Placement Optimization for Structural Health Modeling
Kai Zhou et al.
JOURNAL OF COMPUTING IN CIVIL ENGINEERING (2017)
Interdigital lamb wave transducers for applications in structural health monitoring
Tadeusz Stepinski et al.
NDT & E INTERNATIONAL (2017)
Disbond detection in a composite honeycomb structure of an aircraft vertical stabilizer by fiber Bragg gratings detecting guided ultrasound waves
Indu Fiesler Saxena et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2017)
Guided wave based structural health monitoring: A review
Mira Mitra et al.
SMART MATERIALS AND STRUCTURES (2016)
Modal content-based damage indicators for disbonds in adhesively bonded composite structures
Baiyang Ren et al.
STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL (2016)
Simulation Methods for Guided Wave-Based Structural Health Monitoring
C. Willberg et al.
APPLIED MECHANICS REVIEWS (2015)
Wave propagation analysis in adhesively bonded composite joints using the wavelet spectral finite element method
Dulip Samaratunga et al.
COMPOSITE STRUCTURES (2015)
Kinetic analysis and characterization of an epoxy/cork adhesive
A. Q. Barbosa et al.
THERMOCHIMICA ACTA (2015)
FRACTIONAL STATE SPACE ANALYSIS OF TEMPERATURE TIME SERIES
J. A. Tenreiro Machado et al.
FRACTIONAL CALCULUS AND APPLIED ANALYSIS (2015)
Visualization of hidden delamination and debonding in composites through noncontact laser ultrasonic scanning
Byeongjin Park et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2014)
On the selection of advanced signal processing techniques for guided wave damage identification using a statistical approach
Ching-Tai Ng
ENGINEERING STRUCTURES (2014)
A numerically-enhanced machine learning approach to damage diagnosis using a Lamb wave sensing network
C. Sbarufatti et al.
JOURNAL OF SOUND AND VIBRATION (2014)
Lamb wave based structural damage detection using cointegration and fractal signal processing
Phong B. Dao et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2014)
Ultrasonic guided wave inspection of adhesive bonds between composite laminates
Baiyang Ren et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2013)
Strength of single lap joints with artificial defects
E. F. Karachalios et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2013)
Ultrasonic guided wave propagation across waveguide transitions: Energy transfer and mode conversion
Padmakumar Puthillath et al.
JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA (2013)
Comparison of different higher order finite element schemes for the simulation of Lamb waves
C. Willberg et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2012)
Lamb wave propagation modelling and simulation using parallel processing architecture and graphical cards
P. Packo et al.
SMART MATERIALS AND STRUCTURES (2012)
Quantitative Accessibility of Delamination in Composite Using Lamb Wave by Experiments and FEA
Kyoung-Tak Kang et al.
ADVANCED COMPOSITE MATERIALS (2011)
Propagation of guided waves in bonded composite structures with tapered adhesive layer
Deng Qing-tian et al.
APPLIED MATHEMATICAL MODELLING (2011)
Graphical User Interface for Guided Acoustic Waves
Paolo Bocchini et al.
JOURNAL OF COMPUTING IN CIVIL ENGINEERING (2011)
Influence of stacking sequence on scattering characteristics of the fundamental anti-symmetric Lamb wave at through holes in composite laminates
Martin Veidt et al.
JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA (2011)
Composite Interpolated Fast Fourier Transform With the Hanning Window
Kui Fu Chen et al.
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2010)
Guided Lamb Wave Electroacoustic Devices on Micromachined AlN/Al Plates
Fabio Di Pietrantonio et al.
IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL (2010)
Ultrasonic guided wave inspection of a titanium repair patch bonded to an aluminum aircraft skin
Padmakumar Puthillath et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2010)
Shear lag solution for tuning ultrasonic piezoelectric wafer active sensors with applications to Lamb wave array imaging
Lingyu Yu et al.
INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE (2010)
Ultrasonic Guided Wave Imaging Techniques in Structural Health Monitoring
Fei Yan et al.
JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2010)
Optimizing a spectral element for modeling PZT-induced Lamb wave propagation in thin plates
Sungwon Ha et al.
SMART MATERIALS AND STRUCTURES (2010)
Adhesive interface layer effects in PZT-induced Lamb wave propagation
Sungwon Ha et al.
SMART MATERIALS & STRUCTURES (2010)
Integrated cost/weight optimization of aircraft structures
Markus Kaufmann et al.
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2010)
Optimal Mother Wavelet Selection for Lamb Wave Analyses
Fucai Li et al.
JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2009)
Pattern recognition of guided waves for damage evaluation in bars
Chin Kian Liew et al.
PATTERN RECOGNITION LETTERS (2009)
Modeling guided waves for damage identification in isotropic and orthotropic plates using a local interaction simulation approach
Shankar Sundararaman et al.
JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME (2008)
Structural damage location with fiber Bragg grating rosettes and Lamb waves
Daniel C. Betz et al.
STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL (2007)
Interaction of Lamb waves on bonded composite plates with defects
H. Duflo et al.
COMPOSITE STRUCTURES (2007)
Guided wave signal processing and image fusion for in situ damage localization in plates
Jennifer E. Michaels et al.
WAVE MOTION (2007)
Sensor location studies for damage detection with Lamb waves
B. C. Lee et al.
SMART MATERIALS AND STRUCTURES (2007)
Effect of adhesive on the performance of piezoelectric elements used to monitor structural health
Xinlin P. Qing et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2006)
Guided Lamb waves for identification of damage in composite structures: A review
Zhongqing Su et al.
JOURNAL OF SOUND AND VIBRATION (2006)
A comparison of embedded sensor Lamb wave ultrasonic tomography approaches for material loss detection
T. R. Hay et al.
SMART MATERIALS AND STRUCTURES (2006)
A real-time active smart patch system for monitoring the integrity of bonded repair on an aircraft structure
XLP Qing et al.
SMART MATERIALS & STRUCTURES (2006)
The excitation and detection of lamb waves with planar coil electromagnetic acoustic transducers
PD Wilcox et al.
IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL (2005)
Advanced signal processing for enhanced damage detection with piezoelectric wafer active sensors
LY Yu et al.
SMART STRUCTURES AND SYSTEMS (2005)
Tuned lamb wave excitation and detection with piezoelectric wafer active sensors for structural health monitoring
V Giurgiutiu
JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2005)
Structural health monitoring using scanning laser vibrometry: I. Lamb wave sensing
WJ Staszewski et al.
SMART MATERIALS AND STRUCTURES (2004)
Structural health monitoring using scanning laser vibrometry: II. Lamb waves for damage detection
L Mallet et al.
SMART MATERIALS & STRUCTURES (2004)
Modelling of Lamb waves for damage detection in metallic structures: Part II. Wave interactions with damage
BC Lee et al.
SMART MATERIALS AND STRUCTURES (2003)
Identification of delamination in composite beams using spectral estimation and a genetic algorithm
A Nag et al.
SMART MATERIALS AND STRUCTURES (2002)
Propagation of guided waves in adhesive bonded components
R Seifried et al.
NDT & E INTERNATIONAL (2002)
Conventional electromagnetic acoustic transducer development for optimum Lamb wave modes
R Murayama et al.
ULTRASONICS (2002)
Modeling the propagation of ultrasonic waves in the interface region between two bonded elements
PP Delsanto et al.
ULTRASONICS (2002)
Application of spectral beam finite element with a crack and iterative search technique for damage detection
M Krawczuk
FINITE ELEMENTS IN ANALYSIS AND DESIGN (2002)
Ultrasonic guided wave inspection of bonded lap joints: Noncontact method and photoelastic visualization
FL di Scalea et al.
RESEARCH IN NONDESTRUCTIVE EVALUATION (2001)
Mode and transducer selection for long range lamb wave inspection
PD Wilcox et al.
JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2001)
Characterization of adhesive bond properties using Lamb waves
K Heller et al.
NDT & E INTERNATIONAL (2000)
The rapid monitoring of structures using interdigital Lamb wave transducers
RSC Monkhouse et al.
SMART MATERIALS AND STRUCTURES (2000)
Share Paper
