☆ 4.7 Article

Efficient adsorption of methylene blue from aqueous solution by hydrothermal chemical modification phosphorus ore flotation tailings

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Related references

Note: Only part of the references are listed.

Article Engineering, Environmental

Mesoporous composite Ni-C-N/SA for selective adsorption of methylene blue from water

Chengyi Dai et al.

Summary: The mesoporous Ni-C-N/Silica aerogel (Ni-C-N/SA) was prepared by impregnating the [Ni(tepa)](2+) complex onto a negatively charged silica aerogel support and subjecting it to suitable thermal treatment. The Ni-C-N/SA exhibited selective adsorption for methylene blue (MB) and showed increased adsorption capacity compared to raw silica aerogel (RSA). This was attributed to the binder effect of [Ni(tepa)](2+), leading to changes in pore volume, pore size distribution, and interaction between cationic dye and Ni-C-N components.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Chemistry, Applied

Efficient removal of methylene blue using the mesoporous activated carbon obtained from mangosteen peel wastes: Kinetic, equilibrium, and thermodynamic studies

Zhe Zhang et al.

Summary: Activated carbon synthesized from thermally activated phosphoric acid-treated mangosteen peels shows excellent adsorption performance for methylene blue through physical adsorption. The optimal preparation conditions are a 1:3 impregnation ratio, activation for 60 minutes at 450 degrees Celsius.

MICROPOROUS AND MESOPOROUS MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Preparation and optimization of novel graphene oxide and adsorption isotherm study of methylene blue

Aida Arabpour et al.

Summary: In this study, graphene oxide (GO) with high oxidation degree and high adsorption capacity was successfully synthesized using a modified method. The optimal conditions for maximizing the oxidation degree were determined as ultrasonic temperature of 30.8 degrees Celsius, ultrasonic time of 47.5 minutes, and the time of adding oxidizing agent of 3 hours. The synthesized GO exhibited a high adsorption capacity for methylene blue (MB).

ARABIAN JOURNAL OF CHEMISTRY (2021)

Add to Collection

Article Chemistry, Physical

Surface modification of azurite with lead ions and its effects on the adsorption of sulfide ions and xanthate species

Qian Zhang et al.

Summary: This study investigated the surface modification of azurite with lead ions and its impact on the adsorption of sulfide ions and xanthate species. The results showed that lead ions can promote sulfidization, enhance surface hydrophobicity, and improve flotation recovery.

APPLIED SURFACE SCIENCE (2021)

Add to Collection

Article Biochemistry & Molecular Biology

Characterization and use of a lignin sample extracted from Eucalyptus grandis sawdust for the removal of methylene blue dye

Alexandra Cemin et al.

Summary: The lignin sample extracted from Eucalyptus grandis sawdust was utilized as an adsorbent for the removal of methylene blue from aqueous solutions. The adsorption data fit well with the Langmuir model and the pseudo-second order model, indicating spontaneous removal of MB by lignin involving physisorption mechanisms. This study highlights the potential use of lignin as an effective adsorbent for cationic dyes, including MB, with possible recycling and reusing cycles without significant loss of properties.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2021)

Add to Collection

Article Engineering, Environmental

ZnO/biochar nanocomposites via solvent free ball milling for enhanced adsorption and photocatalytic degradation of methylene blue

Fang Yu et al.

Summary: Novel ZnO/biochar nanocomposites were successfully synthesized in this study using a facile ball-milling method. The ball milling process increased the mesopores and macropores of the nanocomposites, enhancing their adsorption capacity and photocatalytic ability for the removal of methylene blue. The nanocomposites showed high efficiency (up to 95.19%) in removing methylene blue from organic dye wastewater through a combination of adsorption and photocatalysis under visible light.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

H3PO4-activated carbon fibers of high surface area from banana tree pseudo-stem fibers: Adsorption studies of methylene blue dye in batch and fixed bed systems

Marcela C. Silva et al.

Summary: This study reports the preparation and characterization of activated carbon fibers (ACF) from banana tree pseudo-stem using two different methodologies. The ACF(II) prepared with hydrothermal carbonization showed higher BET surface area and better adsorption capacity for methylene blue dye. The adsorption process onto ACF(II) was found to be spontaneous and exothermic, with a high monolayer adsorption capacity and effective performance in fixed bed systems.

JOURNAL OF MOLECULAR LIQUIDS (2021)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Efficient and fast adsorption of methylene blue dye onto a nanosheet MFI zeolite

Yajun Ji et al.

Summary: The nanosheet MFI zeolite with ultrathin lamellar structure showed superior adsorption performance for methylene blue compared to the conventional ZSM-5 zeolite. Higher pH values favored the adsorption of methylene blue for both types of zeolite, with fast adsorption rates and shorter time to reach equilibrium.

JOURNAL OF SOLID STATE CHEMISTRY (2021)

Add to Collection

Article Engineering, Chemical

Activation mechanism of lead ions in the flotation of sulfidized azurite with xanthate as collector

Qian Zhang et al.

Summary: The addition of lead ions after sulfidization of azurite with Na2S improved the flotation recovery of copper oxide ores containing azurite. Zeta potential determination indicated that chemisorption occurred when the sulfidized azurite surface was modified with lead ions. The ToF-SIMS analysis showed the presence of S-, S-2(-), SO3-, and Pb2+ ions on the azurite surface.

MINERALS ENGINEERING (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Synthesis of multi-application activated carbon from oak seeds by KOH activation for methylene blue adsorption and electrochemical supercapacitor electrode

Seyed Abbas Borghei et al.

Summary: In this study, nano-porous activated carbon was synthesized using oak as a biomass resource for methylene blue adsorption and energy storage applications. Temperature played a significant role in affecting the performance of the activated carbon, with the sample prepared at 650 degrees Celsius showing the highest efficiency.

ARABIAN JOURNAL OF CHEMISTRY (2021)

Add to Collection

Article Chemistry, Applied

Cross-linked bionanocomposites of hydrolyzed guar gum/magnetic layered double hydroxide as an effective sorbent for methylene blue removal

Reyhane Tabatabaeian et al.

Summary: Guar gum was chemically modified with Fe3O4/Ni-Al layered double hydroxide to prepare GG-LDH-Fe3O4 bionanocomposites, which were further cross-linked for enhanced adsorption of methylene blue. Analysis showed an improvement in thermal properties by 35% to 47% for the cross-linked composites, with an ability to remove 84% of the MB contaminants.

CARBOHYDRATE POLYMERS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Modified expanded graphite/Fe3O4 composite as an adsorbent of methylene blue: Adsorption kinetics and isotherms

Kuo-Hui Wu et al.

Summary: A magnetic expanded graphite (MEG) composite was successfully synthesized using explosive combustion method, with iron oxide nanoparticles (Fe3O4) coated on the expanded graphite. Both Fe3O4 and MEG exhibited magnetic properties, and the adsorption kinetics of methylene blue dye followed a pseudo-second-order model with a maximum capacity of 78.06 mg/g. The Redlich-Peterson isotherm equation was found to best fit the adsorption experiment datasets in this study.

MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2021)

Add to Collection

Article Engineering, Environmental

Removal of methylene blue from aqueous solution using Lathyrus sativus husk: Adsorption study, MPR and ANN modelling

Indrajit Ghosh et al.

Summary: The study found that the husk of Lathyrus sativus is an effective bio-sorbent for removing methylene blue dye from aqueous solution. Acid-treated husk showed the highest adsorption capacity for the dye. The adsorption process was found to vary at different temperatures.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Synthesis and characterization of Graphene Oxide-Ammonium Ferric Sulfate composite for the removal of dyes from tannery wastewater

Md. Israil Hossain et al.

Summary: Based on the findings, the prepared GO-AFS composite can be considered as an excellent candidate for eradicating pollutants from tannery wastewater, providing a cost-effective alternative to conventional high-cost adsorbents.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

Add to Collection

Article Biochemistry & Molecular Biology

Hollow cellulose-carbon nanotubes composite beads with aligned porous structure for fast methylene blue adsorption

Fuyuan Ding et al.

Summary: The study developed hollow cellulose/carbon nanotubes composite beads with aligned porous structure, which were fabricated by ice template and freeze-drying technology. The composite beads showed effective adsorption of methylene blue, fast adsorption behavior, good reusability, and biodegradability, indicating potential applications in the adsorption fields.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2021)

Add to Collection

Article Engineering, Chemical

Surface sulfidization mechanism of cuprite and its response to xanthate adsorption and flotation performance

Guang Han et al.

Summary: The beneficiation of cuprite through sulfidization using Na2S can significantly improve its floatability, but the quantity of Na2S is crucial as an appropriate amount enhances flotation recovery while excessive Na2S reduces it.

MINERALS ENGINEERING (2021)

Add to Collection

Article Engineering, Chemical

Mesoporous polymetallic silicate derived from naturally abundant mixed clay: A potential robust adsorbent for removal of cationic dye and antibiotic

Wenbo Wang et al.

Summary: The synthesis of mesoporous polymetallic silicate adsorbents with superior adsorption capability towards methylene blue and tetracycline was achieved through a simple one-pot reaction process. The adsorbent showed rapid adsorption and removal of harmful substances from the solution, thanks to its strong adsorption ability.

POWDER TECHNOLOGY (2021)

Add to Collection

Article Chemistry, Analytical

Cefixime adsorption onto activated carbon prepared by dry thermochemical activation of date fruit residues

Vajihe Hasanzadeh et al.

MICROCHEMICAL JOURNAL (2020)

Add to Collection

Article Engineering, Environmental

An efficient and environmentally friendly process for the reduction of SO2 by using waste phosphate mine tailings as adsorbent

Yunxiang Nie et al.

JOURNAL OF HAZARDOUS MATERIALS (2020)

Add to Collection

Article Engineering, Chemical

Ultrasonic enhanced adsorption of methylene blue onto the optimized surface area of activated carbon: Adsorption isotherm, kinetics and thermodynamics

T. C. Egbosiuba et al.

CHEMICAL ENGINEERING RESEARCH & DESIGN (2020)

Add to Collection

Article Polymer Science

Removal of methylene blue from aqueous solutions by silica gel supported calix[4]arene cage: Investigation of adsorption properties

Farabi Temel et al.

EUROPEAN POLYMER JOURNAL (2020)

Add to Collection

Article Engineering, Environmental

An all-in-one strategy for the adsorption of heavy metal ions and photodegradation of organic pollutants using steel slag-derived calcium silicate hydrate

Ningning Shao et al.

JOURNAL OF HAZARDOUS MATERIALS (2020)

Add to Collection

Article Engineering, Chemical

High adsorption of methylene blue by activated carbon prepared from phosphoric acid treated eucalyptus residue

Qiaoning Han et al.

POWDER TECHNOLOGY (2020)

Add to Collection

Article Chemistry, Physical

Phragmites australis as a new cellulose source: Extraction, characterization and adsorption of methylene blue

Gokben Basaran Kankilic et al.

JOURNAL OF MOLECULAR LIQUIDS (2020)

Add to Collection

Article Environmental Sciences

Using Electrolytic Manganese Residue to prepare novel nanocomposite catalysts for efficient degradation of Azo Dyes in Fenton-like processes

Jirong Lan et al.

CHEMOSPHERE (2020)

Add to Collection

Article Materials Science, Composites

Waste-to-resource strategy to fabricate environmentally benign flame retardants from waste phosphorus tailings

Keqing Zhou et al.

COMPOSITES COMMUNICATIONS (2020)

Add to Collection

Article Engineering, Chemical

A facile approach from waste to resource: Reclaimed rubber-derived membrane for dye removal

Yu-Ting Lin et al.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2020)

Add to Collection

Article Chemistry, Applied

Preparation of sulfonated chitosan for enhanced adsorption of methylene blue from aqueous solution

S. Sabar et al.

REACTIVE & FUNCTIONAL POLYMERS (2020)

Add to Collection

Article Pharmacology & Pharmacy

Adsorption of a poorly water-soluble drug onto porous calcium silicate by the sealed heating method

Yayoi Kawano et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Natural adsorption of methylene blue by waste fallen leaves of Magnoliaceae and its repeated thermal regeneration for reuse

Dabin Guo et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Add to Collection

Article Chemistry, Physical

Adsorption of methylene blue on chemically modified lychee seed biochar: Dynamic, equilibrium, and thermodynamic study

Sumanta Sahu et al.

JOURNAL OF MOLECULAR LIQUIDS (2020)

Add to Collection

Article Chemistry, Applied

Ulvan dialdehyde-gelatin hydrogels for removal of heavy metals and methylene blue from aqueous solution

Niklas Wahlstrom et al.

CARBOHYDRATE POLYMERS (2020)

Add to Collection

Article Chemistry, Physical

Efficient adsorption of methylene blue by mesoporous silica prepared using sol-gel method employing hydroxyethyl cellulose as a template

Renliang Lyu et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2020)

Add to Collection

Article Chemistry, Physical

Adsorption of methylene blue on silica nanoparticles: Modelling analysis of the adsorption mechanism via a double layer model

Zichao Li et al.

JOURNAL OF MOLECULAR LIQUIDS (2020)

Add to Collection

Article Engineering, Environmental

One-pot fabrication of rod-like magnesium silicate and its adsorption for Cd2+

Zhiwei Sun et al.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2020)

Add to Collection

Article Chemistry, Physical

Well-designed Ag/ZnO/3D graphene structure for dye removal: Adsorption, photocatalysis and physical separation capabilities

Malihe Kheirabadi et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2019)

Add to Collection

Article Engineering, Chemical

Removal of methylene blue by Polyaniline/TiO2 hydrate: Adsorption kinetic, isotherm and mechanism studies

Ning Wang et al.

POWDER TECHNOLOGY (2019)

Add to Collection

Article Green & Sustainable Science & Technology

An innovative method for simultaneous stabilization/solidification of PO43- and F- from phosphogypsum using phosphorus ore flotation tailings

Bing Li et al.

JOURNAL OF CLEANER PRODUCTION (2019)

Add to Collection

Article Chemistry, Applied

An efficient pH sensitive hydrogel, with biocompatibility and high reusability for removal of methylene blue dye from aqueous solution

Rinki Singh et al.

REACTIVE & FUNCTIONAL POLYMERS (2019)

Add to Collection

Article Engineering, Environmental

Effective removal of crystal violet and methylene blue dyes from water by surface functionalized zirconium silicate nanocomposite

Mohamed E. Mahmoud et al.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2019)

Add to Collection

Article Chemistry, Physical

Insight into highly efficient removal of cadmium and methylene blue by eco-friendly magnesium silicate-hydrothermal carbon composite

Ting Xiong et al.

APPLIED SURFACE SCIENCE (2018)

Add to Collection

Article Agricultural Engineering

Preparation, characterization and Cr(VI) adsorption evaluation of NaOH-activated carbon produced from Date Press Cake; an agro-industrial waste

Samira Norouzi et al.

BIORESOURCE TECHNOLOGY (2018)

Add to Collection

Article Chemistry, Physical

Enhanced uranium(VI) adsorption by chitosan modified phosphate rock

Zhehua Sun et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2018)

Add to Collection

Article Chemistry, Applied

High effective adsorption/removal of illegal food dyes from contaminated aqueous solution by Zr-MOFs (UiO-67)

Qingfeng Yang et al.

FOOD CHEMISTRY (2018)

Add to Collection

Article Chemistry, Physical

Enhancement of methylene blue adsorption onto activated carbon prepared from Date Press Cake by low frequency ultrasound

Zoha Heidarinejad et al.

JOURNAL OF MOLECULAR LIQUIDS (2018)

Add to Collection

Article Engineering, Chemical

Adsorption of methylene blue on modified electrolytic manganese residue: Kinetics, isotherm, thermodynamics and mechanism analysis

Jiancheng Shu et al.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2018)

Add to Collection

Article Engineering, Mechanical

The synthesis of magnesium silicate hydroxide with different morphologies and the comparison of their tribological properties

B. Wang et al.

TRIBOLOGY INTERNATIONAL (2018)

Add to Collection

Article Chemistry, Physical

Facile synthesis of magnetic magnesium silicate hollow nanotubes with high capacity for removal of methylene blue

Jinbo Yang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

Add to Collection

Article Engineering, Chemical

A novel mesoporous silicate material (MS) preparation from dolomite and enhancing methylene blue removal by electronic induction

Pei Chen et al.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2017)

Add to Collection

Article Chemistry, Physical

Characterization of mesoporous magnesium silicate with hierarchical structure and its adsorption performance for dye and lead ion

Jingjing Zhang et al.

SURFACES AND INTERFACES (2017)

Add to Collection

Article Materials Science, Ceramics

Synthesis of nanostructured magnesium silicate with high surface area and mesoporous structure

Bahare Ghods et al.

CERAMICS INTERNATIONAL (2016)

Add to Collection

Article Chemistry, Physical

Biochar prepared from co-pyrolysis of municipal sewage sludge and tea waste for the adsorption of methylene blue from aqueous solutions: Kinetics, isotherm, thermodynamic and mechanism

Shisuo Fan et al.

JOURNAL OF MOLECULAR LIQUIDS (2016)

Add to Collection

Article Engineering, Environmental

Adsorption of methylene blue by a high-efficiency adsorbent (polydopamine microspheres): Kinetics, isotherm, thermodynamics and mechanism analysis

Jianwei Fu et al.

CHEMICAL ENGINEERING JOURNAL (2015)

Add to Collection

Review Chemistry, Physical

Dye and its removal from aqueous solution by adsorption: A review

Mustafa T. Yagub et al.

ADVANCES IN COLLOID AND INTERFACE SCIENCE (2014)

Add to Collection

Article Chemistry, Physical

Adsorption of methylene blue onto humic acid-coated Fe3O4 nanoparticles

Xian Zhang et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2013)

Add to Collection

Article Engineering, Environmental

Adsorption of reactive dye onto carbon nanotubes: Equilibrium, kinetics and thermodynamics

Chung-Hsin Wu

JOURNAL OF HAZARDOUS MATERIALS (2007)

Add to Collection

Article Engineering, Environmental

Adsorption of cobalt from aqueous solutions onto sepiolite

M Kara et al.

WATER RESEARCH (2003)

Add to Collection

© Peeref 2019-2024. All rights reserved.