Ultra-Highly Sensitive Ammonia Detection Based on Light-Induced Thermoelastic Spectroscopy

This invited paper demonstrated an ultra-highly sensitive ammonia (NH3) sensor based on the light-induced thermoelastic spectroscopy (LITES) technique for the first time. A quartz tuning fork (QTF) with a resonance frequency of 32.768 kHz was employed as a detector. A fiber-coupled, continuous wave (CW), distributed feedback (DFB) diode laser emitting at 1530.33 nm was chosen as the excitation source. Wavelength modulation spectroscopy (WMS) and second-harmonic (2 integral) detection techniques were applied to reduce the background noise. In a one scan period, a 2f signal of the two absorption lines located at 6534.6 cm(-1) and 6533.4 cm(-1 )were acquired simultaneously. The 2 integral signal amplitude at the two absorption lines was proved to be proportional to the concentration, respectively, by changing the concentration of NH3 in the analyte. The calculated R-square values of the linear fit are equal to similar to 0.99. The wavelength modulation depth was optimized to be 13.38 mA, and a minimum detection limit (MDL) of similar to 5.85 ppm was achieved for the reported NH3 sensor.

Automated summary

This paper presents an ultra-highly sensitive ammonia sensor using the LITES technique, achieving a minimum detection limit (MDL) of approximately 5.85 ppm by optimizing the wavelength modulation depth.