Related references
Note: Only part of the references are listed.The Effect of Chipping Method on the Geometry of Particles Produced from Date Palm Frond
Neda Eghtedarnejad et al.
BIORESOURCES (2021)
New drum-chipping technology for a more uniform size distribution of wood chips
Jessica Gard Timmerfors et al.
HOLZFORSCHUNG (2020)
Manipulating Chain Type and Flail Drum Speed for Better Fibre Recovery in Chain-Flail Delimber-Debarker-Chipper Operations
Raffaele Spinelli et al.
CROATIAN JOURNAL OF FOREST ENGINEERING (2020)
Material Characterization-Based Wear Mechanism Investigation for Biomass Hammer Mills
Sougata Roy et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)
Analysis of the Work Productivity and Costs of a Stationary Chipper Applied to the Harvesting of Olive Tree Pruning for Bio-Energy Production
Alessandro Suardi et al.
ENERGIES (2020)
Impact of Number of Operators and Distance to Branch Piles on Woodchipper Operation
Lukasz Wargula et al.
FORESTS (2020)
Fuel Consumption Test Results for a Self-Adaptive, Maintenance-Free Wood Chipper Drive Control System
Lukasz Wargula et al.
APPLIED SCIENCES-BASEL (2020)
Influence of Innovative Woodchipper Speed Control Systems on Exhaust Gas Emissions and Fuel Consumption in Urban Areas
Lukasz Wargula et al.
ENERGIES (2020)
Reduction in Operating Costs and Environmental Impact Consisting in the Modernization of the Low-Power Cylindrical Wood Chipper Power Unit by Using Alternative Fuel
Lukasz Wargula et al.
ENERGIES (2020)
Life cycle assessment of wood chips supply chain in Serbia
M. Peric et al.
RENEWABLE ENERGY (2020)
Impact of Compressed Natural Gas (CNG) Fuel Systems in Small Engine Wood Chippers on Exhaust Emissions and Fuel Consumption
Lukasz Wargula et al.
ENERGIES (2020)
Influence of the Use of Liquefied Petroleum Gas (LPG) Systems in Woodchippers Powered by Small Engines on Exhaust Emissions and Operating Costs
Lukasz Wargula et al.
ENERGIES (2020)
DETERMINATION OF MAXIMUM TORQUE DURING CARPENTRY WASTE COMMINUTION
Lukasz Wargula et al.
WOOD RESEARCH (2020)
Influence of Tree Species, Harvesting Method and Storage on Energy Demand and Wood Chip Quality When Chipping Poplar, Willow and Black Locust
Ralf Pecenka et al.
AGRICULTURE-BASEL (2020)
Efficiency of Different Machine Layouts for Chain Flail Delimbing, Debarking and Chipping
Andrew McEwan et al.
FORESTS (2019)
Factors Affecting the Chipping Operation Based on the Screen Size of the Drum Chipper
Yun-Sung Choi et al.
FORESTS (2019)
Impact of adhering soil and other extraneous impurities on the combustion and emission behavior of forest residue wood chips in an automatically stoked small-scale boiler
Thomas Zeng et al.
BIOMASS CONVERSION AND BIOREFINERY (2019)
Energy performance of a new biomass harvester for recovery of orchard wood wastes as alternative to mulching
Carla Nati et al.
RENEWABLE ENERGY (2018)
Physical and thermal characterization of ground bark and ground wood particles
Hamid Rezaei et al.
RENEWABLE ENERGY (2018)
The effect of size, shape and pyrolysis conditions on the thermal decomposition of wood particles and firebrands
Arvind Atreya et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)
Value Retention, Service Life, Use Intensity and Long-Term Productivity of Wood Chippers as Obtained from Contractor Records
Raffaele Spinelli et al.
FORESTS (2017)
Wood decomposition as influenced by invertebrates
Michael D. Ulyshen
BIOLOGICAL REVIEWS (2016)
Energy consumption and CO2 analysis of different types of chippers used in wood biomass plantations
Marco Manzone
APPLIED ENERGY (2015)
Productivity and woodchip quality of different chippers during poplar plantation harvesting
Marco Manzone et al.
BIOMASS & BIOENERGY (2015)
Effect of poplar fuel wood storage on chipping performance
Daniele Pochi et al.
FUEL PROCESSING TECHNOLOGY (2015)
Exposure to noise in wood chipping operations under the conditions of agro-forestry
Anton Poje et al.
INTERNATIONAL JOURNAL OF INDUSTRIAL ERGONOMICS (2015)
The effect of drum design on chipper performance
Raffaele Spinelli et al.
RENEWABLE ENERGY (2015)
Performance of a small and a medium sized professional chippers and the impact of storage time on Scots pine (Pinus sylvestris) stem wood chips characteristics
Juha Laitila et al.
SILVA FENNICA (2015)
Determining long-term chipper usage, productivity and fuel consumption
Raffaele Spinelli et al.
BIOMASS & BIOENERGY (2014)
Managing chipper knife wear to increase chip quality and reduce chipping cost
Raffaele Spinelli et al.
BIOMASS & BIOENERGY (2014)
Effect of piece size and tree part on chipper performance
Alberto Assirelli et al.
BIOMASS & BIOENERGY (2013)
Wood chipping performance of a modified forager
Marco Manzone et al.
BIOMASS & BIOENERGY (2013)
Influence of chipping device and storage method on the quality of SRC poplar biomass
Luigi Pari et al.
BIOMASS & BIOENERGY (2013)
The effect of chipper cut length on wood fuel processing performance
Alessio Facello et al.
FUEL PROCESSING TECHNOLOGY (2013)
Product contamination and harvesting losses from mechanized recovery of olive tree pruning residues for energy use
Andrea Acampora et al.
RENEWABLE ENERGY (2013)
Application of fracture mechanics for energetic effects predictions while wood sawing
Kazimierz A. Orlowski et al.
WOOD SCIENCE AND TECHNOLOGY (2013)
Comparing the efficiency of drum and disc chippers
Raffaele Spinelli et al.
SILVA FENNICA (2013)
Biomass Size Reduction Machines for Enhancing Biogas Production
Lukas Kratky et al.
CHEMICAL ENGINEERING & TECHNOLOGY (2011)
Physical characterization of commercial woodchips on the Italian energy market
Raffaele Spinelli et al.
FUEL (2011)
Determining the Impact of Some Wood Characteristics on the Performance of a Mobile Chipper
Raffaele Spinelli et al.
SILVA FENNICA (2011)
Wood chips size distribution in relation to blade wear and screen use
Carla Nati et al.
BIOMASS & BIOENERGY (2010)
Analyzing and estimating delays in wood chipping operations
Raffaele Spinelli et al.
BIOMASS & BIOENERGY (2009)
The impact of feedstock cost on technology selection and optimum size
Jay B. Cameron et al.
BIOMASS & BIOENERGY (2007)
Share Paper
