Related references
Note: Only part of the references are listed.CuO supported on COK-12 and SBA-15 ordered mesoporous materials for temperature swing SOx adsorption
Julie Schobing et al.
FUEL PROCESSING TECHNOLOGY (2021)
Comprehensive benefit evaluation of conservation tillage based on BP neural network in the Loess Plateau
Jiaqi Hao et al.
SOIL & TILLAGE RESEARCH (2021)
Enhanced performance and selectivity of CO2 methanation over phyllosilicate structure derived Ni-Mg/SBA-15 catalysts
Plaifa Hongmanorom et al.
APPLIED CATALYSIS B-ENVIRONMENTAL (2021)
Catalytic performance of NaAlO2/γ-Al2O3 as heterogeneous nanocatalyst for biodiesel production: Optimization using response surface methodology
Yujiao Zhang et al.
ENERGY CONVERSION AND MANAGEMENT (2020)
One-pot synthesis of ZnO nanoparticles supported on halloysite nanotubes for catalytic applications
Marina Massaro et al.
APPLIED CLAY SCIENCE (2020)
Phoenix dactylifera L. Seed Pretreatment for Oil Extraction and Optimization Studies for Biodiesel Production Using Ce-Zr/Al-MCM-41 Catalyst
Zainab Ibrahim Jibril et al.
CATALYSTS (2020)
Highly curable self-healing vitrimer-like cellulose-modified halloysite nanotube/epoxy nanocomposite coatings
Maryam Jouyandeh et al.
CHEMICAL ENGINEERING JOURNAL (2020)
Halloysite nanotube functionalized with La-Ca bimetallic oxides as novel transesterification catalyst for biodiesel production with molecular simulation
Tong Lin et al.
ENERGY CONVERSION AND MANAGEMENT (2020)
Optimization of the production of biofuel form Jatropha oil using a recyclable anion-exchange resin
Yadessa G. Keneni et al.
FUEL (2020)
Performance and optimization of bio-oil/Buton rock asphalt composite modified asphalt
Songtao Lv et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Influence of torrefaction, hydrothermal carbonization and degradative solvent extraction pretreatments on moisture absorption and self-ignition characteristics of biomass
Man Liu et al.
FUEL (2020)
4-Aminothiophenol capped halloysite nanotubes/silver nanoparticles as surface-enhanced Raman scattering probe for in-situ derivatization and selective determination of nitrite ions in meat product
Huadong Zhang et al.
TALANTA (2020)
Predictions of electricity consumption in a campus building using occupant rates and weather elements with sensitivity analysis: Artificial neural network vs. linear regression
Moon Keun Kim et al.
SUSTAINABLE CITIES AND SOCIETY (2020)
Biodiesel production via stearic acid esterification over mesoporous ZrO2/SiO2 catalysts synthesized by surfactant-assisted sol-gel auto-combustion route
Hala R. Mahmoud et al.
RENEWABLE ENERGY (2020)
A novel α-Fe2O3/AlOOH(γ-Al2O3) nanocatalyst for efficient biodiesel production from waste oil: Kinetic and thermal studies
Mohamed Mokhatr Mohamed et al.
RENEWABLE ENERGY (2020)
Prediction of polycarbonate degradation in natural atmospheric environment of China based on BP-ANN model with screened environmental factors
Dequan Wu et al.
CHEMICAL ENGINEERING JOURNAL (2020)
Highly basic solid catalysts obtained by spray drying of a NaAlO2and boehmite suspension for the upgrading of glycerol to acetins
Sreerangappa Ramesh et al.
SUSTAINABLE ENERGY & FUELS (2020)
Sono-dispersion of calcium over Al-MCM-41 used as a nanocatalyst for biodiesel production from sunflower oil: Influence of ultrasound irradiation and calcium content on catalytic properties and performance
Neda Vardast et al.
RENEWABLE ENERGY (2019)
Recyclable Li/NaY zeolite as a heterogeneous alkaline catalyst for biodiesel production: Process optimization and kinetics study
Zhuang Li et al.
ENERGY CONVERSION AND MANAGEMENT (2019)
Energy, exergy, performance, emission and combustion characteristics of diesel engine using new series of non-edible biodiesels
M. N. Nabi et al.
RENEWABLE ENERGY (2019)
Pilot-scale production of biodiesel from waste cooking oil using kettle limescale as a heterogeneous catalyst
Babak Aghel et al.
RENEWABLE ENERGY (2019)
Enhanced biodiesel production from chicken fat using CaO/CuFe2O4 nanocatalyst and its combination with diesel to improve fuel properties
Kambiz Seffati et al.
FUEL (2019)
Efficient biodiesel production from Jatropha curcus using CaSO4/Fe2O3-SiO2 core-shell magnetic nanoparticles
Siow Hwa Teo et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Optimization of methyl ester production from Prunus Amygdalus seed oil using response surface methodology and Artificial Neural Networks
Chizoo Esonye et al.
RENEWABLE ENERGY (2019)
Halloysite clay nanotubes for life sciences applications: From drug encapsulation to bioscaffold
Ana C. Santos et al.
ADVANCES IN COLLOID AND INTERFACE SCIENCE (2018)
Life cycle energy and greenhouse gas emission effects of biodiesel in the United States with induced land use change impacts
Rui Chen et al.
BIORESOURCE TECHNOLOGY (2018)
Deacidification and ethyl biodiesel production from acid soybean oil using a strong anion exchange resin
Taiana Maria Deboni et al.
CHEMICAL ENGINEERING JOURNAL (2018)
Outstanding performance of rehydrated Mg-Al hydrotalcites as heterogeneous methanolysis catalysts for the synthesis of biodiesel
A. Navajas et al.
FUEL (2018)
Analysis and Optimization of Ultrasound-Assisted Alkaline Palm Oil Transesterification by RSM and ANN-GA
Baharak Sajjadi et al.
CHEMICAL ENGINEERING COMMUNICATIONS (2017)
Improved electrochemical performance of NaAlO2-coated LiCoO2 for lithium-ion batteries
Bin Shen et al.
JOURNAL OF SOLID STATE ELECTROCHEMISTRY (2017)
Synthesis and characterization of spherically-shaped CaO/γ-Al2O3 catalyst and its application in biodiesel production
Dalibor M. Marinkovic et al.
ENERGY CONVERSION AND MANAGEMENT (2017)
Sulfonated coal-based solid acid catalyst synthesis and esterification intensification under ultrasound irradiation
Hewei Yu et al.
FUEL (2017)
Applying an Artificial Neural Network (ANN) to Assess Soil Salinity and Temperature Variability in Agricultural Areas of a Mountain Catchment
Wiktor Halecki et al.
POLISH JOURNAL OF ENVIRONMENTAL STUDIES (2017)
Sono-sulfated zirconia nanocatalyst supported on MCM-41 for biodiesel production from sunflower oil: Influence of ultrasound irradiation power on catalytic properties and performance
Sahar Dehghani et al.
ULTRASONICS SONOCHEMISTRY (2017)
Halloysite nanotubes as support for metal-based catalysts
M. Massaro et al.
JOURNAL OF MATERIALS CHEMISTRY A (2017)
Silane-modified halloysite/Fe3O4 nanocomposites: Simultaneous removal of Cr(VI) and Sb(V) and positive effects of Cr(VI) on Sb(V) adsorption
Kecheng Zhu et al.
CHEMICAL ENGINEERING JOURNAL (2017)
Halloysite Clay Nanotubes for Loading and Sustained Release of Functional Compounds
Yuri Lvov et al.
ADVANCED MATERIALS (2016)
Calcium oxide as a promising heterogeneous catalyst for biodiesel production: Current state and perspectives
Dalibor M. Marinkovic et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)
Composition and Evolution of the Solid-Electrolyte Interphase in Na2Ti3O7 Electrodes for Na-Ion Batteries: XPS and Auger Parameter Analysis
Miguel A. Munoz-Marquez et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
Controlling micro- and nanostructure and activity of the NaAlO2 biodiesel transesterification catalyst by its dissolution in a mesoporous γ-Al2O3-matrix
Alexander V. Agafonov et al.
JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY (2015)
Sodium aluminate from waste aluminium source as catalyst for the transesterification of Jatropha oil
Sudha Kochiyil Cherikkallinmel et al.
RSC ADVANCES (2015)
An investigation on the catalytic capacity of dolomite in transesterification and the calculation of kinetic parameters
Sheng-Li Niu et al.
BIORESOURCE TECHNOLOGY (2014)
Application of kaolin-based catalysts in biodiesel production via transesterification of vegetable oils in excess methanol
Tan Hiep Dang et al.
BIORESOURCE TECHNOLOGY (2013)
Alkaline-catalyzed transesterification of Silurus triostegus Heckel fish oil: Optimization of transesterification parameters
Abdelrahman B. Fadhil et al.
RENEWABLE ENERGY (2013)
Raw halloysite as reusable heterogeneous catalyst for esterification of lauric acid
Leandro Zatta et al.
APPLIED CLAY SCIENCE (2011)
Prediction of optimized pretreatment process parameters for biodiesel production using ANN and GA
Machavaram Rajendra et al.
FUEL (2009)
Optimization of injection molding process parameters using combination of artificial neural network and genetic algorithm method
Shen Changyu et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2007)
Share Paper
