4.8 Review

Dual injection: An effective and efficient technology to use renewable fuels in spark ignition engines

Related references

Note: Only part of the references are listed.
Article Energy & Fuels

Optical diagnostics on the effects of reverse reactivity stratification on the flame development in dual-fuel combustion

Yanqing Cui et al.

Summary: This study investigated the effects of reverse reactivity stratification on combustion characteristics and flame development, demonstrating the importance of different fuel combinations and injection timings in controlling combustion phasing and flame structure. The introduction of reactivity stratification led to larger flame areas and faster flame speeds, highlighting the significant impact of these factors on combustion processes in dual-fuel engines.
Article Chemistry, Physical

Performance and emissions of hydrogen-diesel dual direct injection (H2DDI) in a single-cylinder compression-ignition engine

Xinyu Liu et al.

Summary: The implementation of hydrogen-diesel dual direct injection technology in a compression-ignition engine can improve efficiency and reduce noise and emissions, with the choice of injection timing affecting combustion behavior.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Article Energy & Fuels

Experimental study on combustion and emissions of an SI engine with gasoline port injection and acetone-butanol-ethanol (ABE) direct injection

Zezhou Guo et al.

Summary: This study investigated the performance of using ABE direct injection as an alternative to bio-butanol in an SI engine. Results showed that, under specific ABEDIr and lambda, it can effectively improve IMEP, reduce HC and NOx emissions, and decrease particle numbers.
Article Energy & Fuels

Heat release rate shaping for optimal gross indicated efficiency in a heavy-duty RCCI engine fueled with E85 and diesel

Robbert Willems et al.

Summary: The understanding of reactivity controlled compression ignition has advanced in recent years, with a focus on efficiency due to stringent CO2 regulations. This study combines heat release analysis with regression to explore the impact of combustion parameters on efficiency and loss channels, introducing the burn ratio as a key metric. The research reveals a correlation between burn ratio and fuel reactivity stratification, crucial for optimizing fuel injection and achieving high combustion efficiency.
Editorial Material Thermodynamics

IJER editorial: The future of the internal combustion engine

R. D. Reitz et al.

INTERNATIONAL JOURNAL OF ENGINE RESEARCH (2020)

Article Engineering, Mechanical

Effects of the injection timing on knock and combustion characteristics in dual-fuel dual-injection engines

Jie Li et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING (2020)

Article Green & Sustainable Science & Technology

Re-evaluating effectiveness of vehicle emission control programmes targeting high-emitters

Yuhan Huang et al.

NATURE SUSTAINABILITY (2020)

Article Energy & Fuels

Octane-On-Demand: Onboard Separation of Oxygenates from Gasoline

Katarzyna Grubel et al.

ENERGY & FUELS (2019)

Article Thermodynamics

Experimental investigation on combustion characteristics in dual-fuel dual-injection engine

Rui Kang et al.

ENERGY CONVERSION AND MANAGEMENT (2019)

Review Engineering, Multidisciplinary

Development of Fuel/Engine Systems-The Way Forward to Sustainable Transport

Gautam Kalghatgi

ENGINEERING (2019)

Article Chemistry, Physical

Experimental study on lean-burn characteristics of an SI engine with hydrogen/gasoline combined injection and EGR

Xiumin Yu et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)

Article Environmental Sciences

Fuel consumption and emissions performance under real driving: Comparison between hybrid and conventional vehicles

Yuhan Huang et al.

SCIENCE OF THE TOTAL ENVIRONMENT (2019)

Review Thermodynamics

A review of prechamber ignition systems as lean combustion technology for SI engines

Carlos Eduardo Castilla Alvarez et al.

APPLIED THERMAL ENGINEERING (2018)

Review Green & Sustainable Science & Technology

Alcohol and ether as alternative fuels in spark ignition engine: A review

Omar I. Awad et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)

Review Green & Sustainable Science & Technology

Eco-driving technology for sustainable road transport: A review

Yuhan Huang et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)

Article Engineering, Electrical & Electronic

Recent Progress in Automotive Gasoline Direct Injection Engine Technology

Shijin Shuai et al.

AUTOMOTIVE INNOVATION (2018)

Article Multidisciplinary Sciences

Impacts and mitigation of excess diesel-related NOx emissions in 11 major vehicle markets

Susan C. Anenberg et al.

NATURE (2017)

Review Thermodynamics

Alternative fuels for internal combustion engines

Choongsik Bae et al.

PROCEEDINGS OF THE COMBUSTION INSTITUTE (2017)

Review Thermodynamics

Fuel consumption and CO2 emissions from passenger cars in Europe Laboratory versus real-world emissions

Georgios Fontaras et al.

PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2017)

Review Green & Sustainable Science & Technology

A comprehensive review on utilization of hydrogen in a compression ignition engine under dual fuel mode

Venkateswarlu Chintala et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)

Review Green & Sustainable Science & Technology

Review on the management of RCCI engines

Jing Li et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)

Review Green & Sustainable Science & Technology

Progress in performance analysis of ethanol-gasoline blends on SI engine

Amit Kumar Thakur et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)

Article Thermodynamics

Study on cold start characteristics of dual fuel SI engine with hydrogen direct-injection

Haiming Wu et al.

APPLIED THERMAL ENGINEERING (2016)

Review Chemistry, Applied

A review on natural gas/diesel dual fuel combustion, emissions and performance

Lijiang Wei et al.

FUEL PROCESSING TECHNOLOGY (2016)

Article Chemistry, Physical

Research on combustion and emission characteristics of a lean burn gasoline engine with hydrogen direct-injection

Yaodong Du et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)

Article Chemistry, Physical

Effects of direct hydrogen injection on particle number emissions from a lean burn gasoline engine

Yao Sun et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)

Review Green & Sustainable Science & Technology

Review on bioethanol as alternative fuel for spark ignition engines

Saravana Kannan Thangavelu et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)

Review Green & Sustainable Science & Technology

Effect of alcohol blend and fumigation on regulated and unregulated emissions of IC engines-A review

Meisam Ahmadi Ghadikolaei

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)

Review Thermodynamics

Fuel injector deposits in direct-injection spark-ignition engines

Hongming Xu et al.

PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2015)

Article Thermodynamics

Experimental investigation of direct injection charge cooling in optical GDI engine using tracer-based PLIF technique

Mohammadreza Anbari Attar et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2014)

Article Engineering, Mechanical

Particulate Matter Emission Comparison of Spark Ignition Direct Injection (SIDI) and Port Fuel Injection (PFI) Operation of a Boosted Gasoline Engine

Jianye Su et al.

JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME (2014)

Article Transportation Science & Technology

The Effect of Fuel Temperature on the Ethanol Direct Injection Spray Characteristics of a Multi-hole Injector

Yuhan Huang et al.

SAE INTERNATIONAL JOURNAL OF FUELS AND LUBRICANTS (2014)

Article Transportation Science & Technology

Ultra Boost for Economy: Extending the Limits of Extreme Engine Downsizing

J. W. G. Turner et al.

SAE INTERNATIONAL JOURNAL OF ENGINES (2014)

Review Green & Sustainable Science & Technology

Review and recent developments of laser ignition for internal combustion engines applications

Mohamed H. Morsy

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2012)

Article Transportation Science & Technology

Effect of Heat of Vaporization, Chemical Octane, and Sensitivity on Knock Limit for Ethanol - Gasoline Blends

Robert A. Stein et al.

SAE INTERNATIONAL JOURNAL OF FUELS AND LUBRICANTS (2012)

Article Transportation Science & Technology

Charge Cooling Effects on Knock Limits in SI DI Engines Using Gasoline/Ethanol Blends: Part 2-Effective Octane Numbers

Emmanuel Kasseris et al.

SAE INTERNATIONAL JOURNAL OF FUELS AND LUBRICANTS (2012)

Article Thermodynamics

Production of bioethanol from lignocellulosic materials via the biochemical pathway: A review

Mustafa Balat

ENERGY CONVERSION AND MANAGEMENT (2011)

Article Engineering, Mechanical

Combustion characteristics of a single-cylinder spark ignition gasoline and ethanol dual-fuelled engine

G. Zhu et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING (2010)

Article Engineering, Mechanical

A Comparison of Ethanol and Butanol as Oxygenates Using a Direct-Injection, Spark-Ignition Engine

Thomas Wallner et al.

JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME (2009)

Article Transportation Science & Technology

Challenges for Increased Efficiency through Gasoline Engine Downsizing

Neil Fraser et al.

SAE INTERNATIONAL JOURNAL OF ENGINES (2009)

Article Transportation Science & Technology

Optimal Use of E85 in a Turbocharged Direct Injection Engine

Robert A. Stein et al.

SAE INTERNATIONAL JOURNAL OF FUELS AND LUBRICANTS (2009)

Article Transportation Science & Technology

Impact of Fuel Properties on the Performances and Knock Behaviour of a Downsized Turbocharged DI SI Engine Focus on Octane Numbers and Latent Heat of Vaporization

Jean Milpied et al.

SAE INTERNATIONAL JOURNAL OF FUELS AND LUBRICANTS (2009)

Article Transportation Science & Technology

Measurement of Vapor Pressures and Enthalpies of Vaporization of Gasoline and Ethanol Blends and Their Effects on Mixture Preparation in an SI Engine

Kenneth Kar et al.

SAE INTERNATIONAL JOURNAL OF FUELS AND LUBRICANTS (2009)

Article Multidisciplinary Sciences

Production of dimethylfuran for liquid fuels from biomass-derived carbohydrates

Yuriy Roman-Leshkov et al.

NATURE (2007)

Article Multidisciplinary Sciences

Metal chlorides in ionic liquid solvents convert sugars to 5-hydroxymethylfurfural

Haibo Zhao et al.

SCIENCE (2007)

Article Engineering, Chemical

The hazards and risks of hydrogen

Daniel A. Crowl et al.

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2007)

Review Chemistry, Physical

The hydrogen-fueled internal combustion engine: a technical review

C. M. White et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2006)

Article Thermodynamics

Gasoline direct injection spray simulation

R Rotondi et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2006)