Related references
Note: Only part of the references are listed.Influence of Graphene Oxide on Thermally Induced Shape Memory Behavior of PLA/TPU Blends: Correlation with Morphology, Creep Behavior, Crystallinity, and Dynamic Mechanical Properties
Fatemeh Azadi et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2021)
Design of PLA/ENR thermoplastic vulcanizates with balanced stiffness-toughness based on rubber reinforcement and selective distribution of modified silica
Gang Jiang et al.
POLYMERS FOR ADVANCED TECHNOLOGIES (2021)
An assessment on the effect of trifluoropropyl-POSS and blend composition on morphological, thermal and thermomechanical properties of PLA/TPU
Anoosha Yazdaninia et al.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2020)
Using cellulose nanocrystals as sustainable additive to enhance mechanical and shape memory properties of PLA/ENR thermoplastic vulcanizates
Liming Cao et al.
CARBOHYDRATE POLYMERS (2020)
Fully biobased biodegradable poly(l-lactide)-b-poly(ethylene brassylate)-b-poly(l-lactide) triblock copolymers: synthesis and investigation of relationship between crystallization morphology and thermal properties
Chenhao Jin et al.
POLYMER INTERNATIONAL (2020)
The effect of silk fibroin nanoparticles on the morphology, rheology, dynamic mechanical properties, and toughness of poly(lactic acid)/poly(epsilon-caprolactone) nanocomposite
Masoud Dadras Chomachayi et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2020)
Highly toughened poly(lactic acid) (PLA) prepared through melt blending with ethylene-co-vinyl acetate (EVA) copolymer and simultaneous addition of hydrophilic silica nanoparticles and block copolymer compatibilizer
Salar Moradi et al.
POLYMER TESTING (2020)
A Theoretical and Experimental Analysis of the Effect of Nanoclay on Gas Perm-Selectivity of Biodegradable PLA/EVA Blends in the Presence and Absence of Compatibilizer
Navid Karimpour-Motlagh et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2020)
Super tough poly(lactic acid) blends: a comprehensive review
Xipo Zhao et al.
RSC ADVANCES (2020)
ZnO nanoparticles as chain elasticity reducer and structural elasticity enhancer: Correlating the degradating role and localization of ZnO with the morphological and mechanical properties of PLA/PP/ZnO nanocomposite
Sahar Keshavarzi et al.
POLYMERS FOR ADVANCED TECHNOLOGIES (2019)
Toughening modification of PLLA with PCL in the presence of PCL-b-PLLA diblock copolymers as compatibilizer
Sheng Xiang et al.
POLYMERS FOR ADVANCED TECHNOLOGIES (2019)
An experimental and theoretical mechanistic analysis of thermal degradation of polypropylene/polylactic acid/clay nanocomposites
Navid Karimpour-Motlagh et al.
POLYMERS FOR ADVANCED TECHNOLOGIES (2019)
Following the morphological and thermal properties of PLA/PEO blends containing carbon nanotubes (CNTs) during hydrolytic degradation
Yasser Zare et al.
COMPOSITES PART B-ENGINEERING (2019)
Modeling of viscosity and complex modulus for poly (lactic acid)/poly (ethylene oxide)/carbon nanotubes nanocomposites assuming yield stress and network breaking time
Yasser Zare et al.
COMPOSITES PART B-ENGINEERING (2019)
Dynamics of nucleation and growth mechanism in the presence of nanoparticles or block copolymers: polystyrene/poly(vinyl methyl ether)
Jafar Khademzadeh Yeganeh
POLYMER BULLETIN (2018)
Synergistic effects in epoxy functionalized graphene and modified organo-montmorillonite PLA/PBAT blends
Salima Adrar et al.
APPLIED CLAY SCIENCE (2018)
Structural and phase separation characterization of poly(lactic acid)/poly (ethylene oxide)/carbon nanotube nanocomposites by rheological examinations
Yasser Zare et al.
COMPOSITES PART B-ENGINEERING (2018)
A simple model for constant storage modulus of poly (lactic acid)/poly (ethylene oxide)/carbon nanotubes nanocomposites at low frequencies assuming the properties of interphase regions and networks
Yasser Zare et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2018)
Tailoring toughness of fully biobased poly(lactic acid)/natural rubber blends through dynamic vulcanization
Wan-Jie Si et al.
POLYMER TESTING (2018)
Polylactic acid blends: The future of green, light and tough
Kotiba Hamad et al.
PROGRESS IN POLYMER SCIENCE (2018)
Variations of tunneling properties in poly (lactic acid) (PLA)/poly (ethylene oxide) (PEO)/carbon nanotubes (CNT) nanocomposites during hydrolytic degradation
Sanghoon Kim et al.
SENSORS AND ACTUATORS A-PHYSICAL (2018)
Assessment of localization and degradation of ZnO nano-particles in the PLA/PCL biocompatible blend through a comprehensive rheological characterization
Yeganeh Ahmadzadeh et al.
POLYMER DEGRADATION AND STABILITY (2018)
Viscoelastic phase separation of polystyrene/poly(vinyl methyl ether) blends with different dynamic asymmetry
Hadi Abbasi et al.
JOURNAL OF RHEOLOGY (2017)
Immiscible poly(lactic acid)/poly(ε-caprolactone) for temporary implants: Compatibility and cytotoxicity
Pablo F. M. Finotti et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2017)
Polylactide (PLA) and acrylonitrile butadiene rubber (NBR) blends: The effect of ACN content on morphology, compatibility and mechanical properties
Mahshid Maroufkhani et al.
POLYMER (2017)
Tailoring poly(lactic acid) for packaging applications via the production of fully bio-based in situ microfibrillar composite films
Adel Ramezani Kakroodi et al.
CHEMICAL ENGINEERING JOURNAL (2017)
Super toughened immiscible poly(L-lactide)/poly(ethylene vinyl acetate) (PLLA/EVA) blend achieved by in situ cross-linking reaction and carbon nanotubes
Xiong-fei Wang et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Application of linear rheology in determination of nanoclay localization in PLA/EVA/Clay nanocomposites: Correlation with microstructure and thermal properties
Masoud Razavi Aghjeh et al.
COMPOSITES PART B-ENGINEERING (2016)
Morphology and properties of super-toughened bio-based poly(lactic acid)/poly(ethylene-co-vinyl acetate) blends by peroxide-induced dynamic vulcanization and interfacial compatibilization
Ning Zhang et al.
POLYMER TESTING (2016)
Novel super-toughened bio-based blend from polycarbonate and poly(lactic acid) for durable applications
Yury Yuryev et al.
RSC ADVANCES (2016)
Interfacial and rheological properties of PLA/PBAT and PLA/PBSA blends and their morphological stability under shear flow
M. Nofar et al.
JOURNAL OF RHEOLOGY (2015)
Manipulating the kinetics and mechanism of phase separation in dynamically asymmetric LCST blends by nanoparticles
J. Khademzadeh Yeganeh et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2015)
Simultaneously toughening and reinforcing poly(lactic acid)/thermoplastic polyurethane blend via enhancing interfacial adhesion by hydrophobic silica nanoparticles
Feng Yu et al.
POLYMER TESTING (2015)
Largely improved fracture toughness of an immiscible poly(L-lactide)/ethylene-co-vinyl acetate blend achieved by adding carbon nanotubes
Xiong-fei Wang et al.
RSC ADVANCES (2015)
Biobased Poly(lactide)/ethylene-co-vinyl Acetate Thermoplastic Vulcanizates: Morphology Evolution, Superior Properties, and Partial Degradability
Piming Ma et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2015)
PLLA/ABS Blends Compatibilized by Reactive Comb Polymers: Double Tg Depression and Significantly Improved Toughness
Wenyong Dong et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2015)
In depth analysis of micro-mechanism of mechanical property alternations in PLA/EVA/clay nanocomposites: A combined theoretical and experimental approach
Masoud Razavi Aghjeh et al.
MATERIALS & DESIGN (2015)
Assessment of Miscibility, Crystallization Behaviors, and Toughening Mechanism of Polylactide/Acrylate Copolymer Blends
Hongyu Liang et al.
POLYMER ENGINEERING AND SCIENCE (2015)
Bio-based poly(lactide)/ethylene-co-vinyl acetate thermoplastic vulcanizates by dynamic crosslinking: structure vs. property
Piming Ma et al.
RSC ADVANCES (2015)
Fully Biobased and Supertough Polylactide-Based Thermoplastic Vulcanizates Fabricated by Peroxide-Induced Dynamic Vulcanization and Interfacial Compatibilization
Guang-Chen Liu et al.
BIOMACROMOLECULES (2014)
Improving impact toughness of polylactide/poly(ether)urethane blends via designing the phase morphology assisted by hydrophilic silica nanoparticles
Hao Xiu et al.
POLYMER (2014)
Controlling the kinetics of viscoelastic phase separation through self-assembly of spherical nanoparticles or block copolymers
Jafar Khademzadeh Yeganeh et al.
SOFT MATTER (2014)
Selective localization of carbon nanotubes at the interface of Poly(L-lactide)/Ethylene-co-vinyl Acetate resulting in lowered electrical resistivity
Yun-yun Shi et al.
COMPOSITES PART B-ENGINEERING (2013)
Toughening of poly (lactic acid) by poly (β-hydroxybutyrate-co-β-hydroxyvalerate) with high β-hydroxyvalerate content
P. Ma et al.
EUROPEAN POLYMER JOURNAL (2013)
Non-isothermal crystallization behavior of PLA/LLDPE/nanoclay hybrid: Synergistic role of LLDPE and clay
Ladan As'habi et al.
THERMOCHIMICA ACTA (2013)
Super toughening of the poly(L-lactide)/thermoplastic polyurethane blends by carbon nanotubes
Yun-yun Shi et al.
RSC ADVANCES (2013)
Current progress on bio-based polymers and their future trends
Ramesh P. Babu et al.
PROGRESS IN BIOMATERIALS (2013)
Effects of gamma irradiation on the crystallization, thermal and mechanical properties of poly(L-lactic acid)/ethylene-co-vinyl acetate blends
Hossam M. Said
JOURNAL OF RADIATION RESEARCH AND APPLIED SCIENCES (2013)
Toughening of poly(lactic acid) by ethylene-co-vinyl acetate copolymer with different vinyl acetate contents
P. Ma et al.
EUROPEAN POLYMER JOURNAL (2012)
Sustainability of bio-based plastics: general comparative analysis and recommendations for improvement
Clara Rosalia Alvarez-Chavez et al.
JOURNAL OF CLEANER PRODUCTION (2012)
Carbon nanotubes induced microstructure and mechanical properties changes in cocontinuous poly( L-lactide)/ethylene-co-vinyl acetate blends
Yunyun Shi et al.
POLYMERS FOR ADVANCED TECHNOLOGIES (2012)
Synergistic toughening effect of chlorinated polyethylene and ethylene-vinyl acetate copolymer on the poly (vinyl chloride)/poly (α-methylstyrene-acrylonitrile) blends via compatibilization
Zhen Zhang et al.
POLYMER TESTING (2011)
Structure and properties of clay nano-biocomposites based on poly(lactic acid) plasticized with polyadipates
Veronica P. Martino et al.
POLYMERS FOR ADVANCED TECHNOLOGIES (2011)
Rheology and Morphology of Dynamically Asymmetric LCST Blends: Polystyrene/Poly(vinyl methyl ether)
Jafar Khademzadeh Yeganeh et al.
MACROMOLECULES (2010)
Rheological and Mechanical Characteristics of Low Density Polyethylene/Ethylene-Vinyl Acetate/Organoclay Nanocomposites
Afsoon Behradfar et al.
POLYMER ENGINEERING AND SCIENCE (2010)
Super-tough poly(lactic acid) materials: Reactive blending with ethylene copolymer
Hideko I. Oyama
POLYMER (2009)
Uneven distribution of nanoparticles in immiscible fluids: Morphology development in polymer blends
F. Fenouillot et al.
POLYMER (2009)
Morphology and rheology of immiscible polymer blends filled with silica nanoparticles
L. Elias et al.
POLYMER (2007)
Poly(methyl methacrylate) toughened by ethylene-vinyl acetate copolymer: Physico-mechanical, thermal, and chemical properties
P. Poomalai et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2007)
Thermal and mechanical properties of single-walled carbon nano tubes-polypropylene composites prepared by melt processing
MA López-Manchado et al.
CARBON (2005)
Mechanical, thermal and flammability properties of polyethylene/clay nanocomposites
CG Zhao et al.
POLYMER DEGRADATION AND STABILITY (2005)
Nanotube networks in polymer nanocomposites: Rheology and electrical conductivity
FM Du et al.
MACROMOLECULES (2004)
Share Paper
