Related references
Note: Only part of the references are listed.Constrained Amorphous Interphase in Poly(L-lactic acid): Estimation of the Tensile Elastic Modulus
Laura Aliotta et al.
ACS OMEGA (2020)
Preparation and Compatibilization of PBS/Whey Protein Isolate Based Blends
Maria-Beatrice Coltelli et al.
MOLECULES (2020)
Sustainable Micro and Nano Additives for Controlling the Migration of a Biobased Plasticizer from PLA-Based Flexible Films
Laura Aliotta et al.
POLYMERS (2020)
Hansen solubility parameters obtained via molecular dynamics simulations as a route to predict siloxane surfactant adsorption
Daniel P. Faasen et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2020)
Model Protein Adsorption on Polymers Explained by Hansen Solubility Parameters
Liang Fang et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2019)
Rubber Toughening of Polylactic Acid (PLA) with Poly(butylene adipate-co-terephthalate) (PBAT): Mechanical Properties, Fracture Mechanics and Analysis of Ductile-to-Brittle Behavior while Varying Temperature and Test Speed
Vito Gigante et al.
EUROPEAN POLYMER JOURNAL (2019)
Thermo-Mechanical Properties of PLA/Short Flax Fiber Biocomposites
Laura Aliotta et al.
APPLIED SCIENCES-BASEL (2019)
Processability and Degradability of PHA-Based Composites in Terrestrial Environments
Patrizia Cinelli et al.
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2019)
Polylactic acid blends: The future of green, light and tough
Kotiba Hamad et al.
PROGRESS IN POLYMER SCIENCE (2018)
Poly(lactic acid) mass transfer properties
Uruchaya Sonchaeng et al.
PROGRESS IN POLYMER SCIENCE (2018)
Poly(lactic acid) (PLA) Based Tear Resistant and Biodegradable Flexible Films by Blown Film Extrusion
Norma Mallegni et al.
MATERIALS (2018)
Degradation of polymer blends: A brief review
F. P. La Mantia et al.
POLYMER DEGRADATION AND STABILITY (2017)
On the Use of PLA-PHB Blends for Sustainable Food Packaging Applications
Marina Patricia Arrieta et al.
MATERIALS (2017)
Plasticizing effects of citrate esters on properties of poly(lactic acid)
Mounira Maiza et al.
JOURNAL OF POLYMER ENGINEERING (2016)
Coalescence in PLA-PBAT blends under shear flow: Effects of blend preparation and PLA molecular weight
M. Nofar et al.
JOURNAL OF RHEOLOGY (2016)
Techniques for determining contact angle and wettability of powders
Abdullah Alghunaim et al.
POWDER TECHNOLOGY (2016)
Bionanocomposite films based on plasticized PLA-PHB/cellulose nanocrystal blends
M. P. Arrieta et al.
CARBOHYDRATE POLYMERS (2015)
Effect of the simultaneous biaxial stretching on the structural and mechanical properties of PLA, PBAT and their blends at rubbery state
Racha Al-Itry et al.
EUROPEAN POLYMER JOURNAL (2015)
Improvement of dynamic tensile properties of Poly(lactic acid)/Poly(butylene adipate-co-terephthalate) polymer alloys using a crosslinking agent and observation of fracture surfaces
Masahiro Nishida et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2015)
Melt processed PLA/PCL blends: Effect of processing method on phase structure, morphology, and mechanical properties
Jon Urquijo et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2015)
Solubility factors as screening tools of biodegradable toughening agents of polylactide
Alexandre Ruellan et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2015)
Characterization and Processability of Blends of Polylactide Acid with a New Biodegradable Medium-Chain-Length Polyhydroxyalkanoate
L. Botta et al.
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2015)
Interfacial and rheological properties of PLA/PBAT and PLA/PBSA blends and their morphological stability under shear flow
M. Nofar et al.
JOURNAL OF RHEOLOGY (2015)
Biobased additive plasticizing Polylactic acid (PLA)
Mounira Maiza et al.
POLIMEROS-CIENCIA E TECNOLOGIA (2015)
Influence of chain extender on mechanical, thermal and morphological properties of blown films of PLA/PBAT blends
Liliane Cardoso Arruda et al.
POLYMER TESTING (2015)
A study on properties of PLA/PBAT from blown film process
P. Hongdilokkul et al.
2015 GLOBAL CONFERENCE ON POLYMER AND COMPOSITE MATERIALS (PCM2015) (2015)
Supertoughened Renewable PLA Reactive Multiphase Blends System: Phase Morphology and Performance
Kunyu Zhang et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
Calculating Hansen Solubility Parameters of Polymers with Genetic Algorithms
Guilherme Canete Vebber et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2014)
Comparative Study on Dispersion and Interfacial Properties of Single Walled Carbon Nanotube/Polymer Composites Using Hansen Solubility Parameters
Jing Ma et al.
ACS APPLIED MATERIALS & INTERFACES (2013)
Nonisothermal crystallization kinetics of poly(lactide)effect of plasticizers and nucleating agent
Cecile Courgneau et al.
POLYMER ENGINEERING AND SCIENCE (2013)
Polylactide (PLA)-based nanocomposites
Jean-Marie Raquez et al.
PROGRESS IN POLYMER SCIENCE (2013)
Progress in bio-based plastics and plasticizing modifications
Tizazu Mekonnen et al.
JOURNAL OF MATERIALS CHEMISTRY A (2013)
Role of Specific Interfacial Area in Controlling Properties of Immiscible Blends of Biodegradable Polylactide and Poly[(butylene succinate)-co-adipate]
Vincent Ojijo et al.
ACS APPLIED MATERIALS & INTERFACES (2012)
Isothermal Cold-Crystallization of PLA/PBAT Blends With and Without the Addition of Acetyl Tributyl Citrate
Enic Quero et al.
MACROMOLECULAR CHEMISTRY AND PHYSICS (2012)
Thermal, mechanical and morphological characterization of plasticized PLA-PHB blends
Mohamed A. Abdelwahab et al.
POLYMER DEGRADATION AND STABILITY (2012)
Research Progress in Toughening Modification of Poly(lactic acid)
Hongzhi Liu et al.
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2011)
Analysis of the Structure-Properties Relationships of Different Multiphase Systems Based on Plasticized Poly(Lactic Acid)
Cecile Courgneau et al.
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2011)
Effect of glycidyl methacrylate (GMA) on the thermal, mechanical and morphological property of biodegradable PLA/PBAT blend and its nanocomposites
Mukesh Kumar et al.
BIORESOURCE TECHNOLOGY (2010)
Biodegradable PBAT/Starch Nanocomposites
S. K. Nayak
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2010)
Influence of additives on melt viscosity, surface tension, and film formation of dry powder coatings
Dorothea Sauer et al.
DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY (2009)
Melt rheology of polylactide/poly(butylene adipate-co-terephthalate) blends
Shu-Ying Gu et al.
CARBOHYDRATE POLYMERS (2008)
Poly(lactic acid) properties as a consequence of poly(butylene adipate-co-terephthalate) blending and acetyl tributyl citrate plasticization
Maria-Beatrice Coltelli et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2008)
Processing technologies for poly(lactic acid)
L-T Lim et al.
PROGRESS IN POLYMER SCIENCE (2008)
The effect of crosslinking on the mechanical properties of polylactic acid/polycaprolactone blends
Takeshi Semba et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2006)
Thermo-mechanical characterization of plasticized PLA: Is the miscibility the only significant factor?
Isabelle Pillin et al.
POLYMER (2006)
Mechanical properties, morphology, and crystallization behavior of blends of poly(L-lactide) with poly(butylene succinate-co-L-lactate) and poly(butylene succinate)
M Shibata et al.
POLYMER (2006)
Effect of bisphenol A on the miscibility, phase morphology, and specific interaction in immiscible biodegradable poly(ε-caprolactone)/poly(L- lactide) blends
SW Kuo et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2006)
Study of biodegradable polyactide/poly(butylene adipate-co-terephthalate) blends
L Jiang et al.
BIOMACROMOLECULES (2006)
Solid-state structures and thermal properties of aliphatic-aromatic poly(butylene adipate-co-butylene terephthalate) copolyesters
ZH Gan et al.
POLYMER DEGRADATION AND STABILITY (2004)
Physical characterization of coupled poly(lactic acid)/starch/maleic anhydride blends plasticized by acetyl triethyl citrate
JF Zhang et al.
MACROMOLECULAR BIOSCIENCE (2004)
Using Hansen solubility parameters to correlate solubility of C-60 fullerene in organic solvents and in polymers
CM Hansen et al.
CARBON (2004)
Phase behavior and morphology in blends of poly(L-lactic acid) and poly(butylene succinate)
JW Park et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2002)
Poly(lactic acid):: plasticization and properties of biodegradable multiphase systems
O Martin et al.
POLYMER (2001)
A literature review of poly(lactic acid)
D Garlotta
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2001)
Share Paper
