Related references
Note: Only part of the references are listed.Bending, free vibration, and buckling responses of chopped carbon fiber/graphene nanoplatelet-reinforced polymer hybrid composite plates: An inclusive microstructural assessment
A. Bakamal et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2021)
Computational analysis of the effects of carbon nanotubes on the bending, buckling, and vibration characteristics of carbon fabric/polymer hybrid nanocomposite plates
A. Bakamal et al.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2021)
Axial and lateral buckling analysis of kevlar/epoxy fiber-reinforced composite laminates incorporating silica nanoparticles
Ozkan Ozbek
POLYMER COMPOSITES (2021)
Characteristics and Mechanical Properties of Graphene Nanoplatelets-Reinforced Epoxy Nanocomposites: Comparison of Different Dispersal Mechanisms
Ming-Yuan Shen et al.
SUSTAINABILITY (2021)
Determination of mechanical properties of polymer matrix composites reinforced with electrospinning N66, PAN, PVA and PVC nanofibers: A comparative study
Emin Uslu et al.
MATERIALS TODAY COMMUNICATIONS (2021)
Acoustic radiation and transmission loss of FG-Graphene composite plate under nonuniform edge loading
Vijay Gunasekaran et al.
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2021)
Experimental investigation on the mechanical properties of woven hybrid fiber reinforced epoxy composite
V Santhanam et al.
MATERIALS TODAY-PROCEEDINGS (2021)
Nanographene inclusion effect on the mechanical and low velocity impact response of glass/basalt reinforced epoxy hybrid nanocomposites
Ahmet Erklig et al.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2020)
A short review on mechanical properties of graphene reinforced metal matrix composites
Omer Guler et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Buckling and free vibration analyses of pultruded GFRP laminated composites: Experimental, numerical and analytical investigations
Emrah Madenci et al.
COMPOSITE STRUCTURES (2020)
The effect of graphene nanoplatelets on the flexural properties of fiber metal laminates under marine environmental conditions
Romina Keshavarz et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2020)
The Hybrid Effect of Jute/Kenaf/E-Glass Woven Fabric Epoxy Composites for Medium Load Applications: Impact, Inter-Laminar Strength, and Failure Surface Characterization
M. R. Sanjay et al.
JOURNAL OF NATURAL FIBERS (2019)
Axial and lateral buckling analysis of fiber reinforced S-glass/epoxy composites containing nano-clay particles
Omer Yavuz Bozkurt et al.
COMPOSITES PART B-ENGINEERING (2019)
Mechanical and low velocity impact characterization of carbon/ glass hybrid composites with graphene nanoplatelets
Nurettin Furkan Dogan et al.
MATERIALS RESEARCH EXPRESS (2019)
Post-buckling analysis of honeycomb core sandwich panels with geometrical imperfection and graphene reinforced nano-composite face sheets
Hossein Shahverdi et al.
MATERIALS RESEARCH EXPRESS (2019)
Effects of clay and silica nanoparticles on the Charpy impact resistance of a carbon/aramid fiber reinforced epoxy composite
Mohamad Alsaadi et al.
MATERIALS TESTING (2019)
The effects of S-glass fiber hybridization on vibration-damping behavior of intraply woven carbon/aramid hybrid composites for different lay-up configurations
Mehmet Bulut et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2019)
Influence of aramid fibers on the mechanical behavior of a hybrid carbon-aramid-reinforced epoxy composite
Gonzalo Pincheira et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS (2018)
Hybridization Effects on Charpy Impact Behavior of Basalt/Aramid Fiber Reinforced Hybrid Composite Laminates
Omer Yavuz Bozkurt et al.
POLYMER COMPOSITES (2018)
Bending and buckling analyses of functionally graded polymer composite plates reinforced with graphene nanoplatelets
Mitao Song et al.
COMPOSITES PART B-ENGINEERING (2018)
Nano-silica inclusion effects on mechanical and dynamic behavior of fiber reinforced carbon/Kevlar with epoxy resin hybrid composites
Mohamad Alsaadi et al.
COMPOSITES PART B-ENGINEERING (2018)
NURBS-based isogeometric thermal postbuckling analysis of temperature dependent graphene reinforced composite laminated plates
Y. Kiani
THIN-WALLED STRUCTURES (2018)
Experimental investigation on buckling and free vibration behavior of woven natural fiber fabric composite under axial compression
M. Rajesh et al.
COMPOSITE STRUCTURES (2017)
Experimental investigation on influence of Kevlar fiber hybridization on tensile and damping response of Kevlar/glass/epoxy resin composite laminates
Mehmet Bulut et al.
JOURNAL OF COMPOSITE MATERIALS (2016)
Study of nanoparticles aggregation/agglomeration in polymer particulate nanocomposites by mechanical properties
Yasser Zare
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
High strain-rate failure in carbon/Kevlar hybrid woven composites via a novel SHPB-AE coupled test
Sung-Choong Woo et al.
COMPOSITES PART B-ENGINEERING (2016)
Buckling analysis of thin wall stiffened composite panels
Y. B. SudhirSastry et al.
COMPUTATIONAL MATERIALS SCIENCE (2015)
Optimal design of composite lateral wing upper covers. Part I: Linear buckling analysis
E. Barkanov et al.
AEROSPACE SCIENCE AND TECHNOLOGY (2014)
Hybridization effects on the buckling behavior of laminated composite plates
Eyup Yeter et al.
COMPOSITE STRUCTURES (2014)
Load transfer of graphene/carbon nanotube/polyethylene hybrid nanocomposite by molecular dynamics simulation
Yancheng Zhang et al.
COMPOSITES PART B-ENGINEERING (2014)
Flexural fatigue behavior of synthesized graphene/carbon-nanofiber/epoxy hybrid nanocomposites
M. M. Shokrieh et al.
MATERIALS & DESIGN (2014)
The effects of cut-outs on lateral buckling behavior of laminated composite beams
Ahmet Erklig et al.
COMPOSITE STRUCTURES (2013)
Effect of basalt fiber hybridization on the impact behavior under low impact velocity of glass/basalt woven fabric/epoxy resin composites
Fabrizio Sarasini et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2013)
Hybrid composite laminates reinforced with glass/carbon woven fabrics for lightweight load bearing structures
Jin Zhang et al.
MATERIALS & DESIGN (2012)
Stability analysis of composite columns and parameter optimization against buckling
X. -F. Li et al.
COMPOSITES PART B-ENGINEERING (2011)
Graphene-based polymer nanocomposites
Jeffrey R. Potts et al.
POLYMER (2011)
Enhanced Mechanical Properties of Graphene-Based Poly(vinyl alcohol) Composites
Xin Zhao et al.
MACROMOLECULES (2010)
Dimensional crossover of thermal transport in few-layer graphene
Suchismita Ghosh et al.
NATURE MATERIALS (2010)
Enhanced Mechanical Properties of Nanocomposites at Low Graphene Content
Mohammad A. Rafiee et al.
ACS NANO (2009)
Buckling resistant graphene nanocomposites
M. A. Rafiee et al.
APPLIED PHYSICS LETTERS (2009)
Effective elastic mechanical properties of single layer graphene sheets
F. Scarpa et al.
NANOTECHNOLOGY (2009)
Superior thermal conductivity of single-layer graphene
Alexander A. Balandin et al.
NANO LETTERS (2008)
Functionalized graphene sheets for polymer nanocomposites
T. Ramanathan et al.
NATURE NANOTECHNOLOGY (2008)
Measurement of the elastic properties and intrinsic strength of monolayer graphene
Changgu Lee et al.
SCIENCE (2008)
Two-step surface treatment of 3D braided carbon/Kevlar hybrid fabric and influence on mechanical performance of its composites
Y. Z. Wan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Studies on the low-velocity impact response of woven hybrid composites
MV Hosur et al.
COMPOSITE STRUCTURES (2005)
An investigation on the effect of fiber weight fraction on buckling of laminated composite plates
C Ray
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2004)
Share Paper
