Related references
Note: Only part of the references are listed.Radiation attenuation capability and flow characteristics of HDPE composite loaded with W, MoS2, and B4C
Maryam Afshar et al.
POLYMER COMPOSITES (2019)
Two-Step Approach Based on Solution Mixing and Hot Compaction for CNT/HDPE Nanocomposite Preparation
Ali Jaffal et al.
INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE (2019)
Application of antioxidant and ultraviolet absorber into HDPE: Enhanced resistance to UV irradiation
Tiankai Jiang et al.
E-POLYMERS (2019)
The role of mandrel rotation speed on morphology and mechanical properties of polyethylene pipes produced by rotational shear
Hao Yang et al.
POLYMER (2019)
Improved performance and crystallization behaviors of bimodal HDPE/UHMWPE blends assisted by ultrasonic oscillations
Xuefeng Pan et al.
MATERIALS RESEARCH EXPRESS (2019)
Preparation and characterization of coffee hull fiber for reinforcing application in thermoplastic composites
Zhihao Wang et al.
BIOENGINEERED (2019)
Failure analyses of flexible Ultra-High Molecular Weight Polyethylene (UHMWPE) fiber reinforced anti-blast wall under explosion
Bei Zhang et al.
COMPOSITE STRUCTURES (2018)
Largely enhanced thermal conductivity of HDPE/boron nitride/carbon nanotubes ternary composites via filler network-network synergy and orientation
Junjin Che et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
All-polyethylene composites reinforced via extended-chain UHMWPE nanostructure formation during melt processing
Fan Zhong et al.
POLYMER (2018)
Tailoring the crystalline morphology and mechanical property of olefin block copolymer via blending with a small amount of UHMWFE
Yongsheng Zhao et al.
POLYMER (2017)
Effects of Heat-Treated Wood Particles on the Physico-Mechanical Properties and Extended Creep Behavior of Wood/Recycled-HDPE Composites Using the Time-Temperature Superposition Principle
Teng-Chun Yang et al.
MATERIALS (2017)
Radiation-Induced Grafting with One-Step Process of Waste Polyurethane onto High-Density Polyethylene
Jong-Seok Park et al.
MATERIALS (2016)
Interior morphology of high-performance polyethylene fibers revealed by modulus mapping
Kenneth E. Strawhecker et al.
POLYMER (2016)
Multisite catalyst mediated polymer nanostructure formation and self-reinforced polyethylene reactor blends with improved toughness/stiffness balance
Markus Stuerzel et al.
POLYMER (2016)
Methods of long chain branching detection in PE by triple-detector gel permeation chromatography
Thipphaya Pathaweeisariyakul et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2015)
Mechanisms of plastic deformation in highly cross-linked UHMWPE for total hip components-The molecular physics viewpoint
Yasuhito Takahashi et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2015)
Viscoelastic properties correlations to morphological and mechanical response of HDPE/UHMWPE blends
Harjeet S. Jaggi et al.
JOURNAL OF POLYMER RESEARCH (2014)
Investigation of the influence of solid lubricants on the tribological properties of polyamide 6 nanocomposite
Yi-Lan You et al.
WEAR (2014)
Improved performance balance of polyethylene by simultaneously forming oriented crystals and blending ultrahigh-molecular-weight polyethylene
Ling Xu et al.
RSC ADVANCES (2014)
Self-reinforced polyethylene blend for artificial joint application
Yan-Fei Huang et al.
JOURNAL OF MATERIALS CHEMISTRY B (2014)
Electrical and Mechanical Characterization of High-density Polyethylene/Ethylene Vinyl Acetate/Organoclay Nanocomposite
Javad Mahmoudi et al.
IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION (2013)
Tuning the Superstructure of Ultrahigh-Molecular-Weight Polyethylene/Low-Molecular-Weight Polyethylene Blend for Artificial Joint Application
Ling Xu et al.
ACS APPLIED MATERIALS & INTERFACES (2012)
Ageing of HDPE geomembrane exposed to air, water and leachate at different temperatures
R. K. Rowe et al.
GEOTEXTILES AND GEOMEMBRANES (2009)
Unique crystal morphology and tensile properties of injection-molded bar of LLDPE by adding HDPE with different molecular weights
S. Liang et al.
ACTA MATERIALIA (2008)
Determination of thermal properties and morphology of eucalyptus wood residue filled high density polyethylene composites
Fatih Mengeloglu et al.
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2008)
Formation and stability of shear-induced shish-kebab structure in highly entangled melts of UHMWPE/HDPE blends
Jong Kahk Keum et al.
MACROMOLECULES (2008)
Blending and oxygen permeation properties of the blown films of blends of modified polyamide and ethylene vinyl alcohol copolymer with varying vinyl alcohol contents
Jen-Taut Yeh et al.
JOURNAL OF MATERIALS SCIENCE (2007)
Continuous film processing from ultrahigh-molecular-weight polyethylene reactor powder and mechanical property development by melt drawing
Hiroki Uehara et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2006)
The hierarchy structure and orientation of high density polyethylene obtained via dynamic packing injection molding
Wen Cao et al.
POLYMER (2006)
Dynamic mechanical and thermal properties of MAPE treated jute/HDPE composites
S Mohanty et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2006)
Shear-induced crystallization of isotactic polypropylene within the oriented scaffold of noncrystalline ultrahigh molecular weight polyethylene
CA Avila-Orta et al.
POLYMER (2005)
Electrical and mechanical properties of expanded graphite-reinforced high-density polyethylene
W Zheng et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2004)
Assessment of dielectric behavior of recycled/virgin high density polyethylene blends
SA Cruz et al.
IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION (2004)
Effect of monomethyl itaconate-grafted HDPE and EPR on the compatibility and properties of HDPE-EPR blends
MA López-Manchado et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2003)
Recent innovations in barrier technologies for plastic packaging - a review
J Lange et al.
PACKAGING TECHNOLOGY AND SCIENCE (2003)
Langevin dynamics simulations of early stage shish-kebab crystallization of polymers in extensional flow
I Dukovski et al.
JOURNAL OF CHEMICAL PHYSICS (2003)
Mechanical, thermal and microstructure evaluation of HDPE after weathering in Rio de Janeiro City
LC Mendes et al.
POLYMER DEGRADATION AND STABILITY (2003)
Effects of coupling agents on mechanical and morphological behavior of the PP/HDPE blend with two different CaCO3
J González et al.
EUROPEAN POLYMER JOURNAL (2002)
Tribological investigation of oriented HDPE
M Hoseini et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH (2002)
Processing stability of high density polyethylene:: effect of adsorbed and dissolved oxygen
E Epacher et al.
POLYMER (2000)
Share Paper
