Related references
Note: Only part of the references are listed.Buried Interfaces in Halide Perovskite Photovoltaics
Xiaoyu Yang et al.
ADVANCED MATERIALS (2021)
Modifying Surface Termination of CsPbI3 Grain Boundaries by 2D Perovskite Layer for Efficient and Stable Photovoltaics
Tiantian Liu et al.
ADVANCED FUNCTIONAL MATERIALS (2021)
Colloidal CsCu5S3 nanocrystals as an interlayer in high-performance perovskite solar cells with an efficiency of 22.29%
Chi Yang et al.
CHEMICAL ENGINEERING JOURNAL (2021)
Interfacial stabilization for inverted perovskite solar cells with long-term stability
Wei Chen et al.
SCIENCE BULLETIN (2021)
Recent Progresses on Defect Passivation toward Efficient Perovskite Solar Cells
Feng Gao et al.
ADVANCED ENERGY MATERIALS (2020)
Ammonium Fluoride Interface Modification for High-Performance and Long-Term Stable Perovskite Solar Cells
Qianjin Zhu et al.
ENERGY TECHNOLOGY (2020)
Introduction of Multifunctional Triphenylamino Derivatives at the Perovskite/HTL Interface To Promote Efficiency and Stability of Perovskite Solar Cells
Baohua Zhao et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
Suppression of Iodide Ion Migration via Sb2S3 Interfacial Modification for Stable Inorganic Perovskite Solar Cells
Zhenhua Xu et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
Double-Sided Surface Passivation of 3D Perovskite Film for High-Efficiency Mixed-Dimensional Perovskite Solar Cells
Md Arafat Mahmud et al.
ADVANCED FUNCTIONAL MATERIALS (2020)
Interface Engineering by Thiazolium Iodide Passivation Towards Reduced Thermal Diffusion and Performance Improvement in Perovskite Solar Cells
Manuel Salado et al.
ADVANCED FUNCTIONAL MATERIALS (2020)
Multifunctional Phosphorus-Containing Lewis Acid and Base Passivation Enabling Efficient and Moisture-Stable Perovskite Solar Cells
Zhi Yang et al.
ADVANCED FUNCTIONAL MATERIALS (2020)
Tailored Amphiphilic Molecular Mitigators for Stable Perovskite Solar Cells with 23.5% Efficiency
Hongwei Zhu et al.
ADVANCED MATERIALS (2020)
Improvement of photovoltaic performance of perovskite solar cells by Chock for interface modification with CaTiO3
Shuiping Li et al.
JOURNAL OF POWER SOURCES (2020)
Highly efficient all-inorganic perovskite solar cells with suppressed non-radiative recombination by a Lewis base
Jing Wang et al.
NATURE COMMUNICATIONS (2020)
Elucidating the Role of a Tetrafluoroborate-Based Ionic Liquid at the n-Type Oxide/Perovskite Interface
Nakita K. Noel et al.
ADVANCED ENERGY MATERIALS (2020)
Simultaneous Contact and Grain-Boundary Passivation in Planar Perovskite Solar Cells Using SnO2-KCl Composite Electron Transport Layer
Pengchen Zhu et al.
ADVANCED ENERGY MATERIALS (2020)
Efficient Perovskite Solar Cells by Reducing Interface-Mediated Recombination: a Bulky Amine Approach
Lusheng Liang et al.
ADVANCED ENERGY MATERIALS (2020)
Revisiting Effects of Ligand-Capped Nanocrystals in Perovskite Solar Cells
Oh Yeong Gong et al.
ACS ENERGY LETTERS (2020)
Engineering of Electron Extraction and Defect Passivation via Anion-Doped Conductive Fullerene Derivatives as Interlayers for Efficient Invert Perovskite Solar Cells
Tian Zheng et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
Role of PCBM in the Suppression of Hysteresis in Perovskite Solar Cells
Yu Zhong et al.
ADVANCED FUNCTIONAL MATERIALS (2020)
Self-Crystallized Multifunctional 2D Perovskite for Efficient and Stable Perovskite Solar Cells
Hobeom Kim et al.
ADVANCED FUNCTIONAL MATERIALS (2020)
Ligand-Modulated Excess PbI2 Nanosheets for Highly Efficient and Stable Perovskite Solar Cells
Huanhuan Wang et al.
ADVANCED MATERIALS (2020)
Interface Engineering of Air-Stable n-Doping Fullerene-Modified TiO2 Electron Transport Layer for Highly Efficient and Stable Perovskite Solar Cells
Bingjie Wang et al.
ADVANCED MATERIALS INTERFACES (2020)
Spontaneously Self-Assembly of a 2D/3D Heterostructure Enhances the Efficiency and Stability in Printed Perovskite Solar Cells
Jinlong Hu et al.
ADVANCED ENERGY MATERIALS (2020)
Energetics and Energy Loss in 2D Ruddlesden-Popper Perovskite Solar Cells
Jianming Yang et al.
ADVANCED ENERGY MATERIALS (2020)
Effects of Alkyl Chain Length on Crystal Growth and Oxidation Process of Two-Dimensional Tin Halide Perovskites
Faming Li et al.
ACS ENERGY LETTERS (2020)
A Realistic Methodology for 30% Efficient Perovskite Solar Cells
Chunqing Ma et al.
CHEM (2020)
Fabrication of perovskite solar cell with high short-circuit current density (JSC) using moth-eye structure of SiOX
Sucheol Ju et al.
NANO RESEARCH (2020)
Interfacial Oxygen-Driven Charge Localization and Plasmon Excitation in Unconventional Superconductors
Chi Sin Tang et al.
ADVANCED MATERIALS (2020)
PEDOT:PSS-Metal Oxide Composite Electrode with Regulated Wettability and Work Function for High-Performance Inverted Perovskite Solar Cells
Chenghao Duan et al.
ADVANCED OPTICAL MATERIALS (2020)
Improving energy level alignment by adenine for efficient and stable perovskite solar cells
Lisha Xie et al.
NANO ENERGY (2020)
Interface passivation treatment by halogenated low-dimensional perovskites for high-performance and stable perovskite photovoltaics
Guozhen Liu et al.
NANO ENERGY (2020)
Bifunctional Surface Engineering on SnO2 Reduces Energy Loss in Perovskite Solar Cells
Eui Hyuk Jung et al.
ACS ENERGY LETTERS (2020)
A holistic approach to interface stabilization for efficient perovskite solar modules with over 2,000-hour operational stability
Zonghao Liu et al.
NATURE ENERGY (2020)
The surface of halide perovskites from nano to bulk
Jingjing Xue et al.
NATURE REVIEWS MATERIALS (2020)
Improving Efficiency and Stability of Perovskite Solar Cells Enabled by A Near-Infrared-Absorbing Moisture Barrier
Qin Hu et al.
JOULE (2020)
Interfacial defects passivation using fullerene-polymer mixing layer for planar-structure perovskite solar cells with negligible hysteresis
Xiaofei Hu et al.
SOLAR ENERGY (2020)
p-Phenylenediaminium iodide capping agent enabled self-healing perovskite solar cell
Parisa Zardari et al.
SCIENTIFIC REPORTS (2020)
Interfacial Bridge Using a cis-Fulleropyrrolidine for Efficient Planar Perovskite Solar Cells with Enhanced Stability
Chengbo Tian et al.
SMALL METHODS (2020)
Ultrafast laser-annealing of perovskite films for efficient perovskite solar cells
Peng You et al.
ENERGY & ENVIRONMENTAL SCIENCE (2020)
Molecular materials as interfacial layers and additives in perovskite solar cells
Maria Vasilopoulou et al.
CHEMICAL SOCIETY REVIEWS (2020)
A linear conjugated tetramer as a surface-modification layer to increase perovskite solar cell performance and stability
Helin Wang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2020)
Lewis acid/base approach for efficacious defect passivation in perovskite solar cells
Shurong Wang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2020)
Suppression of surface defects to achieve hysteresis-free inverted perovskite solar cells via quantum dot passivation
Chintam Hanmandlu et al.
JOURNAL OF MATERIALS CHEMISTRY A (2020)
Surface passivation of perovskite thin films by phosphonium halides for efficient and stable solar cells
Qingquan He et al.
JOURNAL OF MATERIALS CHEMISTRY A (2020)
Interface modification of sputtered NiOx as the hole-transporting layer for efficient inverted planar perovskite solar cells
Xiaolu Zheng et al.
JOURNAL OF MATERIALS CHEMISTRY C (2020)
Halide Perovskites: Is It All about the Interfaces?
Philip Schulz et al.
CHEMICAL REVIEWS (2019)
Efficient, stable and scalable perovskite solar cells using poly(3-hexylthiophene)
Eui Hyuk Jung et al.
NATURE (2019)
Bifacial Contact Junction Engineering for High-Performance Perovskite Solar Cells with Efficiency Exceeding 21%
Wu-Qiang Wu et al.
SMALL (2019)
Alkali Chlorides for the Suppression of the Interfacial Recombination in Inverted Planar Perovskite Solar Cells
Wei Chen et al.
ADVANCED ENERGY MATERIALS (2019)
Bifacial Passivation of Organic Hole Transport Interlayer for NiOx-Based p-i-n Perovskite Solar Cells
Zijia Li et al.
ADVANCED SCIENCE (2019)
Formation of Surface Defects Dominates Ion Migration in Lead-Halide Perovskites
Daniele Meggiolaro et al.
ACS ENERGY LETTERS (2019)
Defect and Contact Passivation for Perovskite Solar Cells
Erkan Aydin et al.
ADVANCED MATERIALS (2019)
Defect Passivation by Fullerene Derivative in Perovskite Solar Cells with Aluminum-Doped Zinc Oxide as Electron Transporting Layer
Qi Dong et al.
CHEMISTRY OF MATERIALS (2019)
Surface passivation of perovskite film for efficient solar cells
Qi Jiang et al.
NATURE PHOTONICS (2019)
Interface-Modification-Induced Gradient Energy Band for Highly Efficient CsPbIBr2 Perovskite Solar Cells
Waqas Siddique Subhani et al.
ADVANCED ENERGY MATERIALS (2019)
Stabilizing halide perovskite surfaces for solar cell operation with wide-bandgap lead oxysalts
Shuang Yang et al.
SCIENCE (2019)
Atomic-level passivation mechanism of ammonium salts enabling highly efficient perovskite solar cells
Essa A. Alharbi et al.
NATURE COMMUNICATIONS (2019)
Fullerene Derivative-Modified SnO2 Electron Transport Layer for Highly Efficient Perovskite Solar Cells with Efficiency over 21%
Tiantian Cao et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Impact of Titanium Dioxide Surface Defects on the Interfacial Composition and Energetics of Evaporated Perovskite Active Layers
R. Clayton Shallcross et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Enhanced Performance and Stability of TiO2-Nanoparticles-Based Perovskite Solar Cells Employing a Cheap Polymeric Surface Modifier
Qixin Zhuang et al.
CHEMSUSCHEM (2019)
Enhanced efficiency and thermal stability of perovskite solar cells using poly(9-vinylcarbazole) modified perovskite/PCBM interface
Jiankai Zhang et al.
ELECTROCHIMICA ACTA (2019)
Stabilizing heterostructures of soft perovskite semiconductors
Yanbo Wang et al.
SCIENCE (2019)
Quantifying the Interface Defect for the Stability Origin of Perovskite Solar Cells
Jionghua Wu et al.
ADVANCED ENERGY MATERIALS (2019)
Mechanism of PbI2 in Situ Passivated Perovskite Films for Enhancing the Performance of Perovskite Solar Cells
Yichuan Chen et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Probing the Degradation Chemistry and Enhanced Stability of 2D Organolead Halide Perovskites
Bryan R. Wygant et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)
Impact of PbI2 Passivation and Grain Size Engineering in CH3NH3PbI3 Solar Absorbers as Revealed by Carrier-Resolved Photo-Hall Technique
Julie Euvrard et al.
ADVANCED ENERGY MATERIALS (2019)
Optimal Interfacial Engineering with Different Length of Alkylammonium Halide for Efficient and Stable Perovskite Solar Cells
Hyeonwoo Kim et al.
ADVANCED ENERGY MATERIALS (2019)
Suppressing the ions-induced degradation for operationally stable perovskite solar cells
Xiaodong Li et al.
NANO ENERGY (2019)
Interface modification via Al2O3 with retarded charge recombinations for mesoscopic perovskite solar cells fabricated with spray deposition process in the air
Zhurong Liang et al.
APPLIED SURFACE SCIENCE (2019)
Interfacial Passivation for Perovskite Solar Cells: The Effects of the Functional Group in Phenethylammonium Iodide
Jing Zhuang et al.
ACS ENERGY LETTERS (2019)
In Situ Back-Contact Passivation Improves Photovoltage and Fill Factor in Perovskite Solar Cells
Furui Tan et al.
ADVANCED MATERIALS (2019)
On the Current-Voltage Hysteresis in Perovskite Solar Cells: Dependence on Perovskite Composition and Methods to Remove Hysteresis
Dong-Ho Kong et al.
ADVANCED MATERIALS (2019)
Highly Efficient and Stable Perovskite Solar Cells via Modification of Energy Levels at the Perovskite/Carbon Electrode Interface
Zhifang Wu et al.
ADVANCED MATERIALS (2019)
Fully Air-Bladed High-Efficiency Perovskite Photovoltaics
Jie Ding et al.
JOULE (2019)
Imperfections and their passivation in halide perovskite solar cells
Bo Chen et al.
CHEMICAL SOCIETY REVIEWS (2019)
Interfacial charge-transfer doping of metal halide perovskites for high performance photovoltaics
Nakita K. Noel et al.
ENERGY & ENVIRONMENTAL SCIENCE (2019)
Highly efficient and stable perovskite solar cells via bilateral passivation layers
Tun Wang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2019)
An interface stabilized perovskite solar cell with high stabilized efficiency and low voltage loss
Jason J. Yoo et al.
ENERGY & ENVIRONMENTAL SCIENCE (2019)
Kinetic and material properties of interfaces governing slow response and long timescale phenomena in perovskite solar cells
Hongxia Wang et al.
ENERGY & ENVIRONMENTAL SCIENCE (2019)
A graphene/ ZnO electron transfer layer together with perovskite passivation enables highly efficient and stable perovskite solar cells
Mohammad Mahdi Tavakoli et al.
JOURNAL OF MATERIALS CHEMISTRY A (2019)
Rational chemical doping of metal halide perovskites
Xinyuan Zhang et al.
CHEMICAL SOCIETY REVIEWS (2019)
Energy alignment and recombination in perovskite solar cells: weighted influence on the open circuit voltage
Ilario Gelmetti et al.
ENERGY & ENVIRONMENTAL SCIENCE (2019)
Facile RbBr interface modification improves perovskite solar cell efficiency
Y. Xie et al.
MATERIALS TODAY CHEMISTRY (2019)
The impact of energy alignment and interfacial recombination on the internal and external open-circuit voltage of perovskite solar cells
Martin Stolterfoht et al.
ENERGY & ENVIRONMENTAL SCIENCE (2019)
Divalent hard Lewis acid doped CsPbBr3 films for 9.63%-efficiency and ultra-stable all-inorganic perovskite solar cells
Yuanyuan Zhao et al.
JOURNAL OF MATERIALS CHEMISTRY A (2019)
Efficient Perovskite Solar Cell Modules with High Stability Enabled by Iodide Diffusion Barriers
Enbing Bi et al.
JOULE (2019)
Bifunctional π-conjugated ligand assisted stable and efficient perovskite solar cell fabrication via interfacial stitching
Feijie Wei et al.
JOURNAL OF MATERIALS CHEMISTRY A (2019)
21.7% efficiency achieved in planar n-i-p perovskite solar cells via interface engineering with water-soluble 2D TiS2
Peng Huang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2019)
p-Type CuI Islands on TiO2 Electron Transport Layer for a Highly Efficient Planar-Perovskite Solar Cell with Negligible Hysteresis
Mahdi Malekshahi Byranvand et al.
ADVANCED ENERGY MATERIALS (2018)
Hydrophobic Polystyrene Passivation Layer for Simultaneously Improved Efficiency and Stability in Perovskite Solar Cells
Minghua Li et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
In Situ Growth of 2D Perovskite Capping Layer for Stable and Efficient Perovskite Solar Cells
Peng Chen et al.
ADVANCED FUNCTIONAL MATERIALS (2018)
Stable High-Performance Perovskite Solar Cells via Grain Boundary Passivation
Tianqi Niu et al.
ADVANCED MATERIALS (2018)
Enhancing the Performance of the Half Tin and Half Lead Perovskite Solar Cells by Suppression of the Bulk and Interfacial Charge Recombination
Shuyan Shao et al.
ADVANCED MATERIALS (2018)
Slow surface passivation and crystal relaxation with additives to improve device performance and durability for tin-based perovskite solar cells
Efat Jokar et al.
ENERGY & ENVIRONMENTAL SCIENCE (2018)
Interfacial benzenethiol modification facilitates charge transfer and improves stability of cm-sized metal halide perovskite solar cells with up to 20% efficiency
Jianfeng Lu et al.
ENERGY & ENVIRONMENTAL SCIENCE (2018)
Selective growth of layered perovskites for stable and efficient photovoltaics
Kyung Taek Cho et al.
ENERGY & ENVIRONMENTAL SCIENCE (2018)
The merit of perovskite's dimensionality; can this replace the 3D halide perovskite?
Lioz Etgar
ENERGY & ENVIRONMENTAL SCIENCE (2018)
Enhanced Thermal Stability in Perovskite Solar Cells by Assembling 2D/3D Stacking Structures
Yun Lin et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2018)
Tailored dimensionality to regulate the phase stability of inorganic cesium lead iodide perovskites
Faming Li et al.
NANOSCALE (2018)
Enhanced photovoltage for inverted planar heterojunction perovskite solar cells
Deying Luo et al.
SCIENCE (2018)
Simultaneous Improvement in Efficiency and Stability of Low-Temperature-Processed Perovskite Solar Cells by Interfacial Control
Randi Azmi et al.
ADVANCED ENERGY MATERIALS (2018)
Simultaneous Improvement of Photovoltaic Performance and Stability by In Situ Formation of 2D Perovskite at (FAPbI(3))(0.88)(CsPbBr3)(0.12)/CuSCN Interface
Jiangzhao Chen et al.
ADVANCED ENERGY MATERIALS (2018)
Alternative Perovskites for Photovoltaics
Alexander D. Jodlowski et al.
ADVANCED ENERGY MATERIALS (2018)
Mixed 3D-2D Passivation Treatment for Mixed-Cation Lead Mixed-Halide Perovskite Solar Cells for Higher Efficiency and Better Stability
Yongyoon Cho et al.
ADVANCED ENERGY MATERIALS (2018)
Exploring Inorganic Binary Alkaline Halide to Passivate Defects in Low-Temperature-Processed Planar-Structure Hybrid Perovskite Solar Cells
Xu Liu et al.
ADVANCED ENERGY MATERIALS (2018)
Efficient Perovskite Solar Cells Fabricated by Co Partially Substituted Hybrid Perovskite
Wenzhan Xu et al.
ADVANCED ENERGY MATERIALS (2018)
Orientation Regulation of Phenylethylammonium Cation Based 2D Perovskite Solar Cell with Efficiency Higher Than 11%
Xinqian Zhang et al.
ADVANCED ENERGY MATERIALS (2018)
Adamantanes Enhance the Photovoltaic Performance and Operational Stability of Perovskite Solar Cells by Effective Mitigation of Interfacial Defect States
Mohammad Mahdi Tavakoli et al.
ADVANCED ENERGY MATERIALS (2018)
Controlled surface decomposition derived passivation and energy-level alignment behaviors for high performance perovskite solar cells
Zhipeng Li et al.
JOURNAL OF MATERIALS CHEMISTRY A (2018)
Enhanced performance via partial lead replacement with calcium for a CsPbl3 perovskite solar cell exceeding 13% power conversion efficiency
Cho Fai Jonathan Lau et al.
JOURNAL OF MATERIALS CHEMISTRY A (2018)
Enhancing moisture tolerance in efficient hybrid 3D/2D perovskite photovoltaics
Teck Ming Koh et al.
JOURNAL OF MATERIALS CHEMISTRY A (2018)
Tailored interfaces of unencapsulated perovskite solar cells for > 1,000 hour operational stability
Jeffrey A. Christians et al.
NATURE ENERGY (2018)
In Situ Cesium Modification at Interface Enhances the Stability of Perovskite Solar Cells
Yao Zhao et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Multifunctional RbCl dopants for efficient inverted planar perovskite solar cell with ultra-high fill factor, negligible hysteresis and improved stability
Xixia Liu et al.
NANO ENERGY (2018)
Universal passivation strategy to slot-die printed SnO2 for hysteresis-free efficient flexible perovskite solar module
Tongle Bu et al.
NATURE COMMUNICATIONS (2018)
Iodine-Optimized Interface for Inorganic CsPbI2Br Perovskite Solar Cell to Attain High Stabilized Efficiency Exceeding 14%
Jingru Zhang et al.
ADVANCED SCIENCE (2018)
High performance ambient-air-stable FAPbI3 perovskite solar cells with molecule-passivated Ruddlesden-Popper/3D heterostructured film
Tianqi Niu et al.
ENERGY & ENVIRONMENTAL SCIENCE (2018)
Highly Efficient Perovskite Solar Cells with Ba(OH)2 Interface Modification of Mesoporous TiO2 Electron Transport Layer
M. Thambidurai et al.
ACS APPLIED ENERGY MATERIALS (2018)
2D Ruddlesden-Popper Perovskites for Optoelectronics
Yani Chen et al.
ADVANCED MATERIALS (2018)
Graded Bandgap CsPbI2+xBr1-x Perovskite Solar Cells with a Stabilized Efficiency of 14.4%
Hui Bian et al.
JOULE (2018)
Localized effect of PbI2 excess in perovskite solar cells probed by high- resolution chemical- optoelectronic mapping
Jeremy Barbe et al.
JOURNAL OF MATERIALS CHEMISTRY A (2018)
Excellent Stability of Perovskite Solar Cells by Passivation Engineering
Lili Gao et al.
SOLAR RRL (2018)
The Electrical and Optical Properties of Organometal Halide Perovskites Relevant to Optoelectronic Performance
Valerio Adinolfi et al.
ADVANCED MATERIALS (2018)
Suppressing defects through the synergistic effect of a Lewis base and a Lewis acid for highly efficient and stable perovskite solar cells
Fei Zhang et al.
ENERGY & ENVIRONMENTAL SCIENCE (2018)
π-Conjugated Lewis Base: Efficient Trap-Passivation and Charge-Extraction for Hybrid Perovskite Solar Cells
Yuze Lin et al.
ADVANCED MATERIALS (2017)
Highly efficient perovskite solar cells with a compositionally engineered perovskite/hole transporting material interface
Kyung Taek Cho et al.
ENERGY & ENVIRONMENTAL SCIENCE (2017)
Interface passivation using ultrathin polymer-fullerene films for high-efficiency perovskite solar cells with negligible hysteresis
Jun Peng et al.
ENERGY & ENVIRONMENTAL SCIENCE (2017)
Tunable hysteresis effect for perovskite solar cells
Yaoguang Rong et al.
ENERGY & ENVIRONMENTAL SCIENCE (2017)
Interfacial Modification of Perovskite Solar Cells Using an Ultrathin MAI Layer Leads to Enhanced Energy Level Alignment, Efficiencies, and Reproducibility
Zafer Hawash et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2017)
A solvent- and vacuum-free route to large-area perovskite films for efficient solar modules
Han Chen et al.
NATURE (2017)
The effect of illumination on the formation of metal halide perovskite films
Amita Ummadisingu et al.
NATURE (2017)
Graphene quantum dot incorporated perovskite films: passivating grain boundaries and facilitating electron extraction
Xiang Fang et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2017)
Meniscus-assisted solution printing of large-grained perovskite films for high-efficiency solar cells
Ming He et al.
NATURE COMMUNICATIONS (2017)
Diffusion engineering of ions and charge carriers for stable efficient perovskite solar cells
Enbing Bi et al.
NATURE COMMUNICATIONS (2017)
Fast oxygen diffusion and iodide defects mediate oxygen-induced degradation of perovskite solar cells
Nicholas Aristidou et al.
NATURE COMMUNICATIONS (2017)
Tailoring Organic Cation of 2D Air-Stable Organometal Halide Perovskites for Highly Efficient Planar Solar Cells
Yani Chen et al.
ADVANCED ENERGY MATERIALS (2017)
Efficient and Air-Stable Planar Perovskite Solar Cells Formed on Graphene-Oxide-Modified PEDOT: PSS Hole Transport Layer
Hui Luo et al.
NANO-MICRO LETTERS (2017)
Enhanced long-term stability of perovskite solar cells using a double-layer hole transport material
Qi Li et al.
JOURNAL OF MATERIALS CHEMISTRY A (2017)
Interface engineering in planar perovskite solar cells: energy level alignment, perovskite morphology control and high performance achievement
Guang Yang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2017)
Efficient and Air-Stable Planar Perovskite Solar Cells Formed on Graphene-Oxide-Modified PEDOT: PSS Hole Transport Layer
Hui Luo et al.
NANO-MICRO LETTERS (2017)
Strontium-Doped Low-Temperature-Processed CsPbI2Br Perovskite Solar Cells
Cho Fai Jonathan Lau et al.
ACS ENERGY LETTERS (2017)
PEROVSKITE SOLAR CELLS Stability lies at interfaces
Monica Lira-Cantu
NATURE ENERGY (2017)
Defect passivation in hybrid perovskite solar cells using quaternary ammonium halide anions and cations
Xiaopeng Zheng et al.
NATURE ENERGY (2017)
Matching Charge Extraction Contact for Wide-Bandgap Perovskite Solar Cells
Yuze Lin et al.
ADVANCED MATERIALS (2017)
Understanding Interface Engineering for High-Performance Fullerene/Perovskite Planar Heterojunction Solar Cells
Yao Liu et al.
ADVANCED ENERGY MATERIALS (2016)
Electric-Field-Driven Reversible Conversion Between Methylammonium Lead Triiodide Perovskites and Lead Iodide at Elevated Temperatures
Yongbo Yuan et al.
ADVANCED ENERGY MATERIALS (2016)
Ion Migration in Organometal Trihalide Perovskite and Its Impact on Photovoltaic Efficiency and Stability
Yongbo Yuan et al.
ACCOUNTS OF CHEMICAL RESEARCH (2016)
Lewis Acid-Base Adduct Approach for High Efficiency Perovskite Solar Cells
Jin-Wook Lee et al.
ACCOUNTS OF CHEMICAL RESEARCH (2016)
Hybrid Perovskite/Perovskite Heterojunction Solar Cells
Yinghong Hu et al.
ACS NANO (2016)
Iodine Migration and its Effect on Hysteresis in Perovskite Solar Cells
Cheng Li et al.
ADVANCED MATERIALS (2016)
A Strategy to Simplify the Preparation Process of Perovskite Solar Cells by Co-deposition of a Hole-Conductor and a Perovskite Layer
Senyun Ye et al.
ADVANCED MATERIALS (2016)
Phenylalkylamine Passivation of Organolead Halide Perovskites Enabling High-Efficiency and Air-Stable Photovoltaic Cells
Feng Wang et al.
ADVANCED MATERIALS (2016)
Thin Insulating Tunneling Contacts for Efficient and Water-Resistant Perovskite Solar Cells
Qi Wang et al.
ADVANCED MATERIALS (2016)
Surface optimization to eliminate hysteresis for record efficiency planar perovskite solar cells
Dong Yang et al.
ENERGY & ENVIRONMENTAL SCIENCE (2016)
Enhancing Perovskite Solar Cell Performance by Interface Engineering Using CH3NH3PbBr0.9I2.1 Quantum Dots
Mingyang Cha et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)
Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance
Michael Saliba et al.
SCIENCE (2016)
Inverted Perovskite Solar Cells: Progresses and Perspectives
Tanghao Liu et al.
ADVANCED ENERGY MATERIALS (2016)
Few-Layer MoS2 Flakes as Active Buffer Layer for Stable Perovskite Solar Cells
Andrea Capasso et al.
ADVANCED ENERGY MATERIALS (2016)
Ionic Reactivity at Contacts and Aging of Methylammonium Lead Triiodide Perovskite Solar Cells
Jordi Carrillo et al.
ADVANCED ENERGY MATERIALS (2016)
Perovskite Solar Cell Stability in Humid Air: Partially Reversible Phase Transitions in the PbI2-CH3NH3I-H2O System
Zhaoning Song et al.
ADVANCED ENERGY MATERIALS (2016)
Effect of cesium chloride modification on the film morphology and UV-induced stability of planar perovskite solar cells
Wenzhe Li et al.
JOURNAL OF MATERIALS CHEMISTRY A (2016)
Improved Phase Stability of Formamidinium Lead Triiodide Perovskite by Strain Relaxation
Xiaojia Zheng et al.
ACS ENERGY LETTERS (2016)
High-Performance Planar Perovskite Optoelectronic Devices: A Morphological and Interfacial Control by Polar Solvent Treatment
Jae Choul Yu et al.
ADVANCED MATERIALS (2015)
The Significance of Ion Conduction in a Hybrid Organic-Inorganic Lead-Iodide-Based Perovskite Photosensitizer
Tae-Youl Yang et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2015)
Conversion efficiency improvement of inverted CH3NH3PbI3 perovskite solar cells with room temperature sputtered ZnO by adding the C60 interlayer
Wei-Chih Lai et al.
APPLIED PHYSICS LETTERS (2015)
Enhanced Photovoltaic Performance of Perovskite Solar Cells via Modification of Surface Characteristics Using a Fullerene Interlayer
Md. Shahiduzzaman et al.
CHEMISTRY LETTERS (2015)
Modeling Anomalous Hysteresis in Perovskite Solar Cells
Stephan van Reenen et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2015)
Multifunctional Fullerene Derivative for Interface Engineering in Perovskite Solar Cells
Yaowen Li et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2015)
Perovskite solar cells: an emerging photovoltaic technology
Nam-Gyu Park
MATERIALS TODAY (2015)
Compositional engineering of perovskite materials for high-performance solar cells
Nam Joong Jeon et al.
NATURE (2015)
PEROVSKITE PHOTOVOLTAICS Signs of stability
Karl Leo
NATURE NANOTECHNOLOGY (2015)
Reversible photo-induced trap formation in mixed-halide hybrid perovskites for photovoltaics
Eric T. Hoke et al.
CHEMICAL SCIENCE (2015)
Perovskite-fullerene hybrid materials suppress hysteresis in planar diodese
Jixian Xu et al.
NATURE COMMUNICATIONS (2015)
Ionic transport in hybrid lead iodide perovskite solar cells
Christopher Eames et al.
NATURE COMMUNICATIONS (2015)
Photovoltaic Switching Mechanism in Lateral Structure Hybrid Perovskite Solar Cells
Yongbo Yuan et al.
ADVANCED ENERGY MATERIALS (2015)
Tin perovskite/fullerene planar layer photovoltaics: improving the efficiency and stability of lead-free devices
Kenneth P. Marshall et al.
JOURNAL OF MATERIALS CHEMISTRY A (2015)
Low-temperature SnO2-based electron selective contact for efficient and stable perovskite solar cells
Jiaxing Song et al.
JOURNAL OF MATERIALS CHEMISTRY A (2015)
Giant switchable photovoltaic effect in organometal trihalide perovskite devices (vol 14, pg 193, 2014)
Zhengguo Xiao et al.
NATURE MATERIALS (2015)
Giant switchable photovoltaic effect in organometal trihalide perovskite devices
Zhengguo Xiao et al.
NATURE MATERIALS (2015)
Heterojunction Modification for Highly Efficient Organic - Inorganic Perovskite Solar Cells
Konrad Wojciechowski et al.
ACS NANO (2014)
Enhanced Photoluminescence and Solar Cell Performance via Lewis Base Passivation of Organic Inorganic Lead Halide Perovskites
Nakita K. Noel et al.
ACS NANO (2014)
High Charge Carrier Mobilities and Lifetimes in Organolead Trihalide Perovskites
Christian Wehrenfennig et al.
ADVANCED MATERIALS (2014)
Boosting the Power Conversion Efficiency of Perovskite Solar Cells Using Self-Organized Polymeric Hole Extraction Layers with High Work Function
Kyung-Geun Lim et al.
ADVANCED MATERIALS (2014)
Effects of Surface Blocking Layer of Sb2S3 on Nanocrystalline TiO2 for CH3NH3PbI3 Perovskite Solar Cells
Seigo Ito et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2014)
The Role of Intrinsic Defects in Methylammonium Lead Iodide Perovskite
Jongseob Kim et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2014)
Planar Heterojunction Perovskite Solar Cells via Vapor-Assisted Solution Process
Qi Chen et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2014)
Controllable Self-Induced Passivation of Hybrid Lead Iodide Perovskites toward High Performance Solar Cells
Qi Chen et al.
NANO LETTERS (2014)
CH3NH3PbI3 Perovskite/Fullerene Planar-Heterojunction Hybrid Solar Cells
Jun-Yuan Jeng et al.
ADVANCED MATERIALS (2013)
Formation of a passivating CH3NH3PbI3/PbI2 interface during moderate heating of CH3NH3PbI3 layers
T. Supasai et al.
APPLIED PHYSICS LETTERS (2013)
High-Performance Perovskite-Polymer Hybrid Solar Cells via Electronic Coupling with Fullerene Monolayers
Agnese Abrusci et al.
NANO LETTERS (2013)
Efficient planar heterojunction perovskite solar cells by vapour deposition
Mingzhen Liu et al.
NATURE (2013)
Overcoming ultraviolet light instability of sensitized TiO2 with meso-superstructured organometal tri-halide perovskite solar cells
Tomas Leijtens et al.
NATURE COMMUNICATIONS (2013)
Lead Iodide Perovskite Sensitized All-Solid-State Submicron Thin Film Mesoscopic Solar Cell with Efficiency Exceeding 9%
Hui-Seon Kim et al.
SCIENTIFIC REPORTS (2012)
6.5% efficient perovskite quantum-dot-sensitized solar cell
Jeong-Hyeok Im et al.
NANOSCALE (2011)
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Akihiro Kojima et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2009)