Related references
Note: Only part of the references are listed.Solution-processed TiO2 blocking layers in printed carbon-based perovskite solar cells
Matej Hvojnik et al.
APPLIED SURFACE SCIENCE (2021)
Low-Temperature (<40 °C) Atmospheric-Pressure Dielectric-Barrier-Discharge-Jet Treatment on Nickel Oxide for p-i-n Structure Perovskite Solar Cells
Jui-Hsuan Tsai et al.
ACS OMEGA (2020)
RbF modified FTO electrode enable energy-level matching for efficient electron transport layer-free perovskite solar cells
Shuai Huang et al.
CHEMICAL ENGINEERING JOURNAL (2020)
Cold atmospheric pressure plasma decontamination of allspice berries and effect on qualitative characteristics
Veronika Medvecka et al.
EUROPEAN FOOD RESEARCH AND TECHNOLOGY (2020)
White paper on the future of plasma science for optics and glass
Milan Simek et al.
PLASMA PROCESSES AND POLYMERS (2019)
Efficiency of Ozone Production in Coplanar Dielectric Barrier Discharge
T. Homola et al.
PLASMA CHEMISTRY AND PLASMA PROCESSING (2019)
Fluorine doped tin oxide as an alternative of indium tin oxide for bottom electrode of semi-transparent organic photovoltaic devices
Amirah Way et al.
AIP ADVANCES (2019)
The effect of the ink composition on the performance of carbon-based conductive screen printing inks
Michal Hatala et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2019)
Current progress in interfacial engineering of carbon-based perovskite solar cells
Fanning Meng et al.
JOURNAL OF MATERIALS CHEMISTRY A (2019)
Carbon-based materials for stable, cheaper and large-scale processable perovskite solar cells
Lucia Fagiolari et al.
ENERGY & ENVIRONMENTAL SCIENCE (2019)
The Effect of Transparent Conductive Oxide Substrate on the Efficiency of SnGe-perovskite Solar Cells
Kengo Hamada et al.
JOURNAL OF PHOTOPOLYMER SCIENCE AND TECHNOLOGY (2019)
Investigation of Al2O3 and ZrO2 spacer layers for fully printable and hole-conductor-free mesoscopic perovskite solar cells
Zheng Meng et al.
APPLIED SURFACE SCIENCE (2018)
Influence of O2 plasma treatment on NiOx layer in perovskite solar cells
Yoshihiko Nishihara et al.
JAPANESE JOURNAL OF APPLIED PHYSICS (2018)
Enhancement of electrical properties of flexible ITO/PET by atmospheric pressure roll-to-roll plasma
Masoud Shekargoftar et al.
MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING (2018)
An effective TiO2 blocking layer for hole-conductor-free perovskite solar cells based on carbon counter electrode
Huijing Liu et al.
ORGANIC ELECTRONICS (2018)
The architecture of the electron transport layer for a perovskite solar cell
Mohamad Firdaus Mohamad Noh et al.
JOURNAL OF MATERIALS CHEMISTRY C (2018)
A Comparison of the Effects of Ambient Air Plasma Generated by Volume and by Coplanar DBDs on the Surfaces of PP/Al/PET Laminated Foil
Masoud Shekargoftar et al.
IEEE TRANSACTIONS ON PLASMA SCIENCE (2018)
Oxygen management in carbon electrode for high-performance printable perovskite solar cells
Chengbo Tian et al.
NANO ENERGY (2018)
Self-Compensation in Transparent Conducting F-Doped SnO2
Jack E. N. Swallow et al.
ADVANCED FUNCTIONAL MATERIALS (2018)
Solar Conversion Efficiency Improvement of Dye-Sensitized Solar Cells via Plasma Treatment of Transparent Conducting Oxide Substrate
Haeng-Yun Jung et al.
JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY (2017)
New developments in surface functionalization of polymers using controlled plasma treatments
Alenka Vesel et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2017)
Advances in hole transport materials engineering for stable and efficient perovskite solar cells
Zinab H. Bakr et al.
NANO ENERGY (2017)
Pulsed laser deposition of tin oxide thin films for field emission
H. Jadhav et al.
APPLIED SURFACE SCIENCE (2017)
Development of Al2O3 electrospun fibers prepared by conventional sintering method or plasma assisted surface calcination
E. Mudra et al.
APPLIED SURFACE SCIENCE (2017)
Fast and Low-Temperature (70 °C) Mineralization of Inkjet Printed Mesoporous TiO2 Photoanodes Using Ambient Air Plasma
Tomas Homola et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Not All That Glitters Is Gold: Metal-Migration-Induced Degradation in Perovskite Solar Cells
Konrad Domanski et al.
ACS NANO (2016)
Tuning the ITO work function by capacitively coupled plasma and its application in inverted organic solar cells
Ming Fang et al.
APPLIED SURFACE SCIENCE (2016)
Atmospheric pressure plasma assisted calcination of organometallic fibers
Veronika Medvecka et al.
MATERIALS LETTERS (2016)
In Situ Measurements of Work Function of Indium Tin Oxide after UV/Ozone Treatment
Daisuke Yamashita et al.
MATERIALS TRANSACTIONS (2015)
Engineering of hole-selective contact for low temperature-processed carbon counter electrodebased perovskite solar cells
Fuguo Zhang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2015)
Silver Iodide Formation in Methyl Ammonium Lead Iodide Perovskite Solar Cells with Silver Top Electrodes
Yuichi Kato et al.
ADVANCED MATERIALS INTERFACES (2015)
Light induced TiO2 phase transformation: Correlation with luminescent surface defects
Luigi Stagi et al.
PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS (2015)
Surface properties of indium tin oxide treated by Cl2 inductively coupled plasma
Kongduo He et al.
APPLIED SURFACE SCIENCE (2014)
A facile two-step method for fabrication of plate-like WO3 photoanode under mild conditions
Nan Wang et al.
FARADAY DISCUSSIONS (2014)
Atmospheric Plasma Surface Activation of Poly(Ethylene Terephthalate) Film for Roll-To-Roll Application of Transparent Conductive Coating
Tomas Homola et al.
JOURNAL OF ADHESION (2014)
Optical diagnostics of streamer discharges in atmospheric gases
M. Simek
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2014)
Effects of H2/O2 mixed gas plasma treatment on electrical and optical property of indium tin oxide
Jun Young Kim et al.
APPLIED SURFACE SCIENCE (2013)
Efficient inorganic-organic hybrid heterojunction solar cells containing perovskite compound and polymeric hole conductors
Jin Hyuck Heo et al.
NATURE PHOTONICS (2013)
Atmospheric pressure diffuse plasma in ambient air for ITO surface cleaning
Tomas Homola et al.
APPLIED SURFACE SCIENCE (2012)
Mesoscopic CH3NH3PbI3/TiO2 Heterojunction Solar Cells
Lioz Etgar et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2012)
Ozone Production Using a Power Modulated Surface Dielectric Barrier Discharge in Dry Synthetic Air
M. Simek et al.
PLASMA CHEMISTRY AND PLASMA PROCESSING (2012)
Work function of fluorine doped tin oxide
M. G. Helander et al.
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A (2011)
Effects of Oxygen Addition and Treating Distance on Surface Cleaning of ITO Glass by a Non-Equilibrium Nitrogen Atmospheric-Pressure Plasma Jet
M-H Chiang et al.
PLASMA CHEMISTRY AND PLASMA PROCESSING (2010)
Plasma amination of low-density polyethylene by DBD afterglows at atmospheric pressure
Claus-Peter Klages et al.
PLASMA PROCESSES AND POLYMERS (2008)
Physicochemical characteristics of fluorine doped tin oxide films
A. I. Martinez et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2006)
Direct comparison of photoemission spectroscopy and in situ Kelvin probe work function measurements on indium tin oxide films
M. M. Beerbom et al.
JOURNAL OF ELECTRON SPECTROSCOPY AND RELATED PHENOMENA (2006)
Improvement of organic electroluminescent device performance by in situ plasma treatment of indium-tin-oxide surface
M Ishii et al.
JOURNAL OF LUMINESCENCE (2000)