Related references
Note: Only part of the references are listed.Investigation on micromechanism involved in ferrite hardening after prestraining of dual-phase steel
Nan Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Study on the Partitioning of Alloying Elements Between bcc-Fe Matrix and bcc-Cu Precipitates and the Corresponding Effects on the Precipitation Interface
Xueyun Gao et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2020)
Effects of Al on the precipitation of B2 Cu-rich particles in Fe-Cu ferritic alloy: Experimental and theoretical study
Haiyan Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Nanoscale precipitation and its influence on strengthening mechanisms in an ultra-high strength low-carbon steel
S. S. Xu et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2019)
DAMASK - The Dusseldorf Advanced Material Simulation Kit for modeling multi-physics crystal plasticity, thermal, and damage phenomena from the single crystal up to the component scale
F. Roters et al.
COMPUTATIONAL MATERIALS SCIENCE (2019)
High strength-elongation balance in ultrafine grained ferrite-martensite dual phase steels developed by thermomechanical processing
Yousef Mazaheri et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Implications of microstructure, Taylor factor distribution and texture on tensile properties in a Ti-added Fe-Mn-Al-Si-C steel
Arnab Sarkar et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Experimental-numerical study on strain and stress partitioning in bainitic steels with martensite-austenite constituents
Noriki Fujita et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2018)
Effects of co-addition of Ni and Al on precipitation evolution and mechanical properties of Fe-Cu alloy
Qin Shen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
First-principles study of interactions between substitutional solutes in bcc iron
O. I. Gorbatov et al.
JOURNAL OF NUCLEAR MATERIALS (2016)
Stress strain behavior of ferrite and bainite with nano-precipitation in low carbon steels
Naoya Kamikawa et al.
ACTA MATERIALIA (2015)
High resolution in situ mapping of microstrain and microstructure evolution reveals damage resistance criteria in dual phase steels
Dingshun Yan et al.
ACTA MATERIALIA (2015)
Tensile Behavior of Ferrite-martensite Dual Phase Steels with Nano-precipitation of Vanadium Carbides
Naoya Kamikawa et al.
ISIJ INTERNATIONAL (2015)
Damage in dual phase steel DP1000 investigated using digital image correlation and microstructure simulation
Khaled Alharbi et al.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2015)
Aging characteristics and mechanical properties of 1600 MPa body-centered cubic Cu and B2-NiAl precipitation-strengthened ferritic steel
Monica Kapoor et al.
ACTA MATERIALIA (2014)
Enhanced ductility and toughness in an ultrahigh-strength Mn-Si-Cr-C steel: The great potential of ultrafine filmy retained austenite
Guhui Gao et al.
ACTA MATERIALIA (2014)
Strain localization and damage in dual phase steels investigated by coupled in-situ deformation experiments and crystal plasticity simulations
C. C. Tasan et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2014)
DREAM. 3D: A Digital Representation Environment for the Analysis of Microstructure in 3D
Michael A. Groeber et al.
INTEGRATING MATERIALS AND MANUFACTURING INNOVATION (2014)
Synergistic alloying effect on microstructural evolution and mechanical properties of Cu precipitation-strengthened ferritic alloys
Y. R. Wen et al.
ACTA MATERIALIA (2013)
Synergistic effects of Cu and Ni on nanoscale precipitation and mechanical properties of high-strength steels
Z. B. Jiao et al.
ACTA MATERIALIA (2013)
Development of high strength and ductile ultra fine grained dual phase steel with nano sized carbide precipitates in a V-Nb microalloyed steel
M. Papa Rao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Development of 3rd generation AHSS with medium Mn content alloying compositions
Huseyin Aydin et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
On the Role of Ni in Cu Precipitation in Multicomponent Steels
Qingdong Liu et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2013)
Critical review of automotive steels spot welding: process, structure and properties
M. Pouranvari et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2013)
Third generation of AHSS with increased fraction of retained austenite for the automotive industry
A. Grajcar et al.
ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2012)
Numerical Analysis of Hydrogen Trap State by TiC and V4C3 in bcc-Fe
Kazuto Kawakami et al.
ISIJ INTERNATIONAL (2012)
Deformation and fracture mechanisms in fine- and ultrafine-grained ferrite/martensite dual-phase steels and the effect of aging
Marion Calcagnotto et al.
ACTA MATERIALIA (2011)
Formation of Ultrafine Grained Dual Phase Steels through Rapid Heating
Hamid Azizi-Alizamini et al.
ISIJ INTERNATIONAL (2011)
The fundamental relationships between grain orientation, deformation-induced surface roughness and strain localization in an aluminum alloy
M. R. Stoudt et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Atomic structure of nanoclusters in oxide-dispersion-strengthened steels
A. Hirata et al.
NATURE MATERIALS (2011)
From embryos to precipitates: A study of nucleation and growth in a multicomponent ferritic steel
Z. W. Zhang et al.
PHYSICAL REVIEW B (2011)
Effect of Cu on the evolution of precipitation in an Fe-Cr-Ni-Al-Ti maraging steel
Ronald Schnitzer et al.
ACTA MATERIALIA (2010)
Grain Refinement in Dual-Phase Steels
K. Mukherjee et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2009)
The influence of Cu addition on precipitation in Fe-Cr-Ni-Al-(Cu) model alloys
S. Hoering et al.
ULTRAMICROSCOPY (2009)
The temporal evolution of the decomposition of a concentrated multicomponent Fe-Cu-based steel
R. Prakash Kolli et al.
ACTA MATERIALIA (2008)
The comparative effectiveness of Nb solute and NbC precipitates at impeding grain-boundary motion in Nb steels
C. R. Hutchinson et al.
SCRIPTA MATERIALIA (2008)
Toughening of a 1500 Mpa class steel through formation of an ultrafine fibrous grain structure
Y. Kimura et al.
SCRIPTA MATERIALIA (2007)
Structure-property optimization of ultrafine-grained dual-phase steels using a micro structure-based strain hardening model
M. Delince et al.
ACTA MATERIALIA (2007)
Microstructure and texture of a lightly deformed TRIP-assisted steel characterized by means of the EBSD technique
Roumen Petrov et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
Crystallographic model for bcc-to-9R martensitic transformation of Cu precipitates in ferritic steel
T. -H. Lee et al.
PHILOSOPHICAL MAGAZINE (2007)
Selecting non-isothermal heat treatment schedules for precipitation hardening systems: An example of coupled process-property optimization
C. R. Hutchinson et al.
ACTA MATERIALIA (2007)
Interfacial segregation at Cu-rich precipitates in a high-strength low-carbon steel studied on a sub-nanometer scale
D Isheim et al.
ACTA MATERIALIA (2006)
Fabrication of ultrafine grained ferrite/martensite dual phase steel by severe plastic deformation
KT Park et al.
ISIJ INTERNATIONAL (2005)
Influence of deformation induced ferrite transformation on grain refinement of dual phase steel
SC Hong et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2002)
Precipitation kinetics and strengthening of a Fe-0.8wt%Cu alloy
A Deschamps et al.
ISIJ INTERNATIONAL (2001)