Related references
Note: Only part of the references are listed.Refined heterogeneous phase unit enhances ductility in quenched ultra-high strength steels
Shilong Liu et al.
SCRIPTA MATERIALIA (2021)
Nanoprecipitates induced dislocation pinning and multiplication strategy for designing high strength, plasticity and conductivity Cu alloys
Huiya Yang et al.
SCRIPTA MATERIALIA (2021)
Mechanical properties and deformation mechanisms of a novel austenite-martensite dual phase steel
S. S. Xu et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2020)
Chemical boundary engineering: A new route toward lean, ultrastrong yet ductile steels
Ran Ding et al.
SCIENCE ADVANCES (2020)
Ultra-high strength attributed to retardation of recrystallization during intercritical annealing in cold-rolled (V,Nb) microalloyed 5Mn steel
Hao Wu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Nanoscale precipitation and its influence on strengthening mechanisms in an ultra-high strength low-carbon steel
S. S. Xu et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2019)
Influence of retained austenite and Cu precipitates on the mechanical properties of a cold-rolled and intercritically annealed medium Mn steel
P. Cheng et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Age-hardening medium Mn steel with high strength and large ductility
Bao-Guang Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Simultaneous enhancement of strength and ductility via nanoscale Cu precipitates and ultrafine filmy retained austenite in a novel quench-partitioned and tempered steel
Xuequan Rong et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Combined contribution of Cu-rich precipitates and retained austenite on mechanical properties of a novel low-carbon medium-Mn steel plate
Y. Zou et al.
JOURNAL OF MATERIALS SCIENCE (2019)
1.0 GPa low carbon medium Mn heavy steel plate with excellent ductility
Jun Chen et al.
MATERIALS SCIENCE AND TECHNOLOGY (2019)
Microstructure evolution during high-temperature partitioning of a medium-Mn quenching and partitioning steel
S. Ayenampudi et al.
MATERIALIA (2019)
In Situ Investigation of the Evolution of Lattice Strain and Stresses in Austenite and Martensite During Quenching and Tempering of Steel
M. Villa et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2018)
The austenite reversion and co-precipitation behavior of an ultra-low carbon medium manganese quenching-partitioning-tempering steel
Yu Li et al.
ACTA MATERIALIA (2018)
Novel medium-Mn (austenite plus martensite) duplex hot-rolled steel achieving 1.6 GPa strength with 20 % ductility by Mn-segregation-induced TRIP mechanism
Hyungsoo Lee et al.
ACTA MATERIALIA (2018)
Growth mode of austenite during reversion from martensite in Fe-2Mn-1.5Si-0.3C alloy: A transition in kinetics and morphology
Xianguang Zhang et al.
ACTA MATERIALIA (2018)
Increasing yield strength of medium Mn steel by engineering multiple strengthening defects
B. B. He et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Internal stresses and carbon enrichment in austenite of Quenching and Partitioning steels from high energy X-ray diffraction experiments
Sebastien Yves Pierre Allain et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Aging characteristics and strengthening behavior of a low-carbon medium-Mn Cu-bearing steel
Y. Zou et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Simultaneous enhancement of strength and plasticity by nano B2 clusters and nano-gamma phase in a low carbon low alloy steel
G. Han et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
A medium manganese steel designed for water quenching and partitioning
Z. R. Hou et al.
MATERIALS SCIENCE AND TECHNOLOGY (2018)
Room-Temperature Quenching and Partitioning Steel
B. B. He et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2018)
A novel multi-step intercritical heat treatment induces multi-phase microstructure with ultra-low yield ratio and high ductility in advanced high-strength steel
Z. J. Xie et al.
SCRIPTA MATERIALIA (2018)
Advanced high strength steel (AHSS) development through chemical patterning of austenite
W. W. Sun et al.
SCRIPTA MATERIALIA (2018)
Combined Intercritical Annealing and Q&P Processing of Medium Mn Steel
Bruno C. De Cooman et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2017)
Thermal and mechanical stability of retained austenite surrounded by martensite with different degrees of tempering
J. Hidalgo et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
High strength-toughness combination of a low-carbon medium-manganese steel plate with laminated microstructure and retained austenite
Y. Zou et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Effect of two-step intercritical annealing on microstructure and mechanical properties of hot-rolled medium manganese TRIP steel containing δ-ferrite
Yun-bo Xu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Strengthening effect of nanoscale precipitation and transformation induced plasticity in a hot rolled copper-containing ferrite-based lightweight steel
Junfeng Wang et al.
SCRIPTA MATERIALIA (2017)
In-situ investigation of quenching and partitioning by High Energy X-Ray Diffraction experiments
S. Y. P. Allain et al.
SCRIPTA MATERIALIA (2017)
Medium Mn transformation-induced plasticity steels: Recent progress and challenges
Dong-Woo Suh et al.
SCRIPTA MATERIALIA (2017)
Evolution of crystal structure of Cu precipitates in a low carbon steel
G. Han et al.
MATERIALS & DESIGN (2017)
On the microstructural characteristics influencing the yielding behavior of ultra-fine grained medium-Mn steels
Katharina Steineder et al.
ACTA MATERIALIA (2017)
The significance of multi-step partitioning: Processing-structure property relationship in governing high strength-high ductility combination in medium-manganese steels
S. Liu et al.
ACTA MATERIALIA (2017)
The mechanism of hydrogen embrittlement in intercritically annealed medium Mn TRIP steel
Jeongho Han et al.
ACTA MATERIALIA (2016)
Microstructure-mechanical properties relationships for quenching and partitioning (Q&P) processed steel
Eun Jung Seo et al.
ACTA MATERIALIA (2016)
The determining role of aluminum on copper precipitation and mechanical properties in Cu-Ni-bearing low alloy steel
S. Liu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Austenite stability and its effect on the toughness of a high strength ultra-low carbon medium manganese steel plate
Y. Zou et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
The respective hardening contributions of dislocations and twins to the flow stress of a twinning-induced plasticity steel
Z. Y. Liang et al.
SCRIPTA MATERIALIA (2016)
Role of stress-assisted martensite in the design of strong ultrafine-grained duplex steels
Hung-Wei Yen et al.
ACTA MATERIALIA (2015)
Stress strain behavior of ferrite and bainite with nano-precipitation in low carbon steels
Naoya Kamikawa et al.
ACTA MATERIALIA (2015)
Nanolaminate transformation-induced plasticity-twinning-induced plasticity steel with dynamic strain partitioning and enhanced damage resistance
M. -M. Wang et al.
ACTA MATERIALIA (2015)
New ultrahigh-strength Mn-alloyed TRIP steels with improved formability manufactured by intercritical annealing
Haiwen Luo et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Current opinion in medium manganese steel
Y. -K. Lee et al.
MATERIALS SCIENCE AND TECHNOLOGY (2015)
Retained Austenite Stabilization Through Solute Partitioning During Intercritical Annealing in C-, Mn-, Al-, Si-, and Cr-Alloyed Steels
Singon Kang et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2015)
The effects of the initial martensite microstructure on the microstructure and tensile properties of intercritically annealed Fe-9Mn-0.05C steel
Jeongho Han et al.
ACTA MATERIALIA (2014)
The effects of the heating rate on the reverse transformation mechanism and the phase stability of reverted austenite in medium Mn steels
Jeongho Han et al.
ACTA MATERIALIA (2014)
Stability of retained austenite in multi-phase microstructure during austempering and its effect on the ductility of a low carbon steel
Z. J. Xie et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Phase transformation of Cu precipitates from bcc to fcc in Fe-3Si-2Cu alloy
Y. -U. Heo et al.
ACTA MATERIALIA (2013)
Microstructure, tensile and toughness properties after quenching and partitioning treatments of a medium-carbon steel
E. Paravicini Bagliani et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
The effect of morphology on the stability of retained austenite in a quenched and partitioned steel
X. C. Xiong et al.
SCRIPTA MATERIALIA (2013)
Experimental and numerical analysis on formation of stable austenite during the intercritical annealing of 5Mn steel
Haiwen Luo et al.
ACTA MATERIALIA (2011)
Microstructure and mechanical properties of Fe-0.2C-5Mn steel processed by ART-annealing
W. Q. Cao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Strengthening mechanisms of a new 700 MPa hot rolled Ti-microalloyed steel produced by compact strip production
Xinping Mao et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2010)
Enhanced work-hardening behavior and mechanical properties in ultrafine-grained steels with large-fractioned metastable austenite
Jie Shi et al.
SCRIPTA MATERIALIA (2010)
Effect of composition on kinetics of athermal martensite formation in plain carbon steels
S. M. C. van Bohemen et al.
MATERIALS SCIENCE AND TECHNOLOGY (2009)
Austenite grain size and the martensite-start temperature
Hong-Seok Yang et al.
SCRIPTA MATERIALIA (2009)
Simultaneously increasing the ductility and strength of nanostructured alloys
Yong-Hao Zhao et al.
ADVANCED MATERIALS (2006)
Effect of internal stress on autocatalytic nucleation of martensitic transformation
QP Meng et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2006)
Origin of copper precipitation strengthening in steel revisite
ME Fine et al.
SCRIPTA MATERIALIA (2005)
Precipitation strengthening at ambient and elevated temperatures of heat-treatable Al(Sc) alloys
DN Seidman et al.
ACTA MATERIALIA (2002)
Share Paper
