Related references
Note: Only part of the references are listed.Effects of crack orientation and heat treatment on fatigue-crack-growth behavior of AM 17-4 PH stainless steel
Aref Yadollahi et al.
ENGINEERING FRACTURE MECHANICS (2020)
Effect of porosities on brazed martensitic steel tensile properties: 2D and 3D pre-mortem vs post-mortem characterizations
N. Vanderesse et al.
MATERIALS CHARACTERIZATION (2020)
Nano-sized austenite and Cu precipitates formed by using intercritical tempering plus tempering and their effect on the mechanical property in a low carbon Cu bearing 7 Ni steel
Wei Hou et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Selective laser melting and heat treatment of precipitation hardening stainless steel with a refined microstructure and excellent mechanical properties
X. D. Nong et al.
SCRIPTA MATERIALIA (2020)
Characterisation of 17-4PH metallic powder recycling to optimise the performance of the selective laser melting process
Pablo Zapico et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Study of powder recycling and its effect on printed parts during laser powder-bed fusion of 17-4 PH stainless steel
Farid Ahmed et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)
A comparative study of microstructure and hydrogen embrittlement of selective laser melted and wrought 17-4 PH stainless steel
Michella Alnajjar et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Pitting corrosion of 17-4PH stainless steel manufactured by laser beam melting
Adrien Barroux et al.
CORROSION SCIENCE (2020)
The effects of fabrication atmosphere condition on the microstructural and mechanical properties of laser direct manufactured stainless steel 17-4 PH
D. Wang et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)
Effects of aging treatment on the precipitation behavior of ε-Cu phase and mechanical properties of metal injection molding 17-4PH stainless steel
Chen-Yuan Chung et al.
MATERIALS LETTERS (2019)
Identification and characterization of spatter particles and their effect on surface roughness, density and mechanical response of 17-4 PH stainless steel laser powder-bed fusion parts
Usman Ali et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
The role of the austenite grain size in the martensitic transformation in low carbon steels
Carola Celada-Casero et al.
MATERIALS & DESIGN (2019)
Cyclic deformation and fatigue behavior of additively manufactured 17-4 PH stainless steel
Luiz Carneiro et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
Fatigue behavior of additively manufactured 17-4 PH stainless steel: Synergistic effects of surface roughness and heat treatment
P. D. Nezhadfar et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
Fatigue crack growth behavior of additively manufactured 17-4 PH stainless steel: Effects of build orientation and microstructure
P. D. Nezhadfar et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
Microstructure and property of a selective laser melting process induced oxide dispersion strengthened 17-4 PH stainless steel
Tzu-Hou Hsu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Tensile properties of sintered 17-4PH stainless steel fabricated by material extrusion additive manufacturing
Joamin Gonzalez-Gutierrez et al.
MATERIALS LETTERS (2019)
Laser beam melting and heat-treatment of 1.2343 (AISI H11) tool steel - microstructure and mechanical properties
Florian Huber et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Effects of particle characteristics on the microstructure and mechanical properties of 17-4 PH stainless steel fabricated by laser-powder bed fusion
Harish Irrinki et al.
POWDER TECHNOLOGY (2018)
Effect of heat treatments on microstructural evolution of additively manufactured and wrought 17-4PH stainless steel
Yu Sun et al.
MATERIALS & DESIGN (2018)
Impact of composition on the heat treatment response of additively manufactured 17-4 PH grade stainless steel
S. D. Meredith et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Effects of building orientation and heat treatment on fatigue behavior of selective laser melted 17-4 PH stainless steel
Aref Yadollahi et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Effect of scan strategy on density and metallurgical properties of 17-4PH parts printed by Selective Laser Melting (SLM)
R. Rashid et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
Experimental investigation on selective laser melting of 17-4PH stainless steel
Zhiheng Hu et al.
OPTICS AND LASER TECHNOLOGY (2017)
Mechanical properties and microstructural characterization of selective laser melted 17-4 PH stainless steel
Mohamad Mahmoudi et al.
RAPID PROTOTYPING JOURNAL (2017)
Sequential nucleation of phases in a 17-4PH steel: Microstructural characterisation and mechanical properties
Guma Yeli et al.
ACTA MATERIALIA (2017)
Additive Manufacturing of 17-4 PH Stainless Steel: Post-processing Heat Treatment to Achieve Uniform Reproducible Microstructure
Sudha Cheruvathur et al.
JOM (2016)
Additive manufacturing of metals
Dirk Herzog et al.
ACTA MATERIALIA (2016)
Effect of Prior Austenite Grain Size Refinement by Thermal Cycling on the Microstructural Features of As-Quenched Lath Martensite
Javier Hidalgo et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2016)
Effect of retained austenite on subsequent thermal processing and resultant mechanical properties of selective laser melted 17-4 PH stainless steel
Tyler LeBrun et al.
MATERIALS & DESIGN (2015)
Investigation into the effect of process parameters on microstructural and physical properties of 316L stainless steel parts by selective laser melting
J. A. Cherry et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
Microstructure and Mechanical Behavior of 17-4 Precipitation Hardenable Steel Processed by Selective Laser Melting
H. Khalid Rafi et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2014)
Strain rate sensitivity and mechanical anisotropy of selective laser melted 17-4 PH stainless steel
Tyler Lebrun et al.
MECHANICAL ENGINEERING JOURNAL (2014)
Effect of Austenite Grain Size on Transformation Behavior, Microstructure and Mechanical Properties of 0.1C-5Mn Martensitic Steel
Toshihiro Hanamura et al.
ISIJ INTERNATIONAL (2013)
Microstructures and Properties of 17-4 PH Stainless Steel Fabricated by Selective Laser Melting
Lawrence E. Murr et al.
Journal of Materials Research and Technology-JMR&T (2013)
Comparison of density measurement techniques for additive manufactured metallic parts
A. B. Spierings et al.
RAPID PROTOTYPING JOURNAL (2011)
Metastable Austenite in 17-4 Precipitation-Hardening Stainless Steel Produced by Selective Laser Melting
Luca Facchini et al.
ADVANCED ENGINEERING MATERIALS (2010)
Martensite start temperature and the austenite grain-size
J. R. C. Guimaraes et al.
JOURNAL OF MATERIALS SCIENCE (2010)
Aging kinetics of 17-4 PH stainless steel
H. Mirzadeh et al.
MATERIALS CHEMISTRY AND PHYSICS (2009)
Austenite grain size and the martensite-start temperature
Hong-Seok Yang et al.
SCRIPTA MATERIALIA (2009)
Crystallographic model for bcc-to-9R martensitic transformation of Cu precipitates in ferritic steel
T. -H. Lee et al.
PHILOSOPHICAL MAGAZINE (2007)
On the α′ to γ transformation in maraging (grade 350), PH 13-8 Mo and 17-4 PH steels
R Kapoor et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Effect of grain refinement on thermal stability of metastable austenitic steel
S Takaki et al.
MATERIALS TRANSACTIONS (2004)
Influence of high temperature exposure on the mechanical behavior and microstructure of 17-4 PH stainless steel
JH Wu et al.
JOURNAL OF MATERIALS SCIENCE (2003)
Aging reactions in a 17-4 PH stainless steel
CN Hsiao et al.
MATERIALS CHEMISTRY AND PHYSICS (2002)
Atomistic study of the coherency loss during the b.c.c.-9R transformation of small copper precipitates in ferritic steels
Y Le Bouar
ACTA MATERIALIA (2001)
Share Paper
