Related references
Note: Only part of the references are listed.Parameter effects and process modeling of FFF-TPU mechanical response
J. D. Kechagias et al.
MATERIALS AND MANUFACTURING PROCESSES (2023)
Advanced robotics and additive manufacturing of composites: towards a new era in Industry 4.0
Hetal Parmar et al.
MATERIALS AND MANUFACTURING PROCESSES (2022)
Use of additive manufacturing for the fabrication of cellular and lattice materials: a review
Esmeralda Uribe-Lam et al.
MATERIALS AND MANUFACTURING PROCESSES (2021)
Optimization of 3D printing process parameters to minimize surface roughness with hybrid artificial neural network model and particle swarm algorithm
Mohammad Shirmohammadi et al.
PROGRESS IN ADDITIVE MANUFACTURING (2021)
Current surface issues in additive manufacturing
Julien Magnien et al.
PLASMA PROCESSES AND POLYMERS (2020)
Review on effect of Ti-alloy processing techniques on surface-integrity for biomedical application
S. P. Leo Kumar et al.
MATERIALS AND MANUFACTURING PROCESSES (2020)
The Influence of Selected Selective Laser Sintering Technology Process Parameters on Stress Relaxation, Mass of Models, and Their Surface Texture Quality
Tomasz Kozior
3D PRINTING AND ADDITIVE MANUFACTURING (2020)
Automatic generation of alternative build orientations for laser powder bed fusion based on facet clustering
Yuchu Qin et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2020)
A comprehensive evaluation for different post-curing methods used in stereolithography additive manufacturing
Jing Zhao et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Additively manufactured three dimensional reference porous media for the calibration of permeability measurement set-ups
M. Bodaghi et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)
A hybrid PSO-BFO evolutionary algorithm for optimization of fused deposition modelling process parameters
Maraboina Raju et al.
JOURNAL OF INTELLIGENT MANUFACTURING (2019)
Nanofinishing of FDM-fabricated components using ball end magnetorheological finishing process
Aman Kumar et al.
MATERIALS AND MANUFACTURING PROCESSES (2019)
On the variability of permeability induced by reinforcement distortions and dual scale flow in liquid composite moulding: A review
M. Bodaghi et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
In-plane permeability characterization of engineering textiles based on radial flow experiments: A benchmark exercise
D. May et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
Selective laser sintering and multi jet fusion: Process-induced modification of the raw materials and analyses of parts performance
Francesco Sillani et al.
ADDITIVE MANUFACTURING (2019)
Optimization of surface roughness in FDM 3D printer using response surface methodology, particle swarm optimization, and symbiotic organism search algorithms
Mohd Sazli Saad et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Influence of processing parameters on microstructure and roughness of electron beam melted Ti-6Al-4V titanium alloy
U. Prisco et al.
MATERIALS AND MANUFACTURING PROCESSES (2019)
The process and performance comparison of polyamide 12 manufactured by multi jet fusion and selective laser sintering
Zhiyao Xu et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
Improving Surface Roughness of Additively Manufactured Parts Using a Photopolymerization Model and Multi-Objective Particle Swarm Optimization
Namjung Kim et al.
APPLIED SCIENCES-BASEL (2019)
Investigation on the effect of surface modification of 3D printed parts by nanoclay and dimethyl ketone
Vishal Francis et al.
MATERIALS AND MANUFACTURING PROCESSES (2018)
A more accurate analytical formulation of surface roughness in layer-based additive manufacturing to enhance the product's precision
Amirali Lalehpour et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Fabrication of polymeric lattice structures for optimum energy absorption using Multi Jet Fusion technology
F. N. Habib et al.
MATERIALS & DESIGN (2018)
Influence of PLA Filament Conditions on Characteristics of FDM Parts
Ana Pilar Valerga et al.
MATERIALS (2018)
Surface Quality Enhancement of Fused Deposition Modeling (FDM) Printed Samples Based on the Selection of Critical Printing Parameters
Mercedes Perez et al.
MATERIALS (2018)
Build orientation optimization for multi-part production in additive manufacturing
Yicha Zhang et al.
JOURNAL OF INTELLIGENT MANUFACTURING (2017)
On the surface quality of additive manufactured parts
A. Barari et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Surface quality prediction in FDM additive manufacturing
L. Di Angelo et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Laser assisted finishing process for improved surface finish of fused deposition modelled parts
Mohammad Taufik et al.
JOURNAL OF MANUFACTURING PROCESSES (2017)
Modeling flow in porous media with rough surfaces: Effective slip boundary conditions and application to structured packings
Sylvain Pasquier et al.
CHEMICAL ENGINEERING SCIENCE (2017)
Effect of Process Parameters on Dynamic Mechanical Performance of FDM PC/ABS Printed Parts Through Design of Experiment
Omar Ahmed Mohamed et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2016)
Development of a Precision Surface Polishing System for Parts Fabricated by Fused Deposition Modeling
Chil-Chyuan Kuo et al.
MATERIALS AND MANUFACTURING PROCESSES (2016)
The adaptive slicing algorithm and its impact on the mechanical property and surface roughness of freeform extrusion parts
Hongbin Li et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2016)
On Surface Finish and Dimensional Accuracy of FDM Parts after Cold Vapor Treatment
Ashu Garg et al.
MATERIALS AND MANUFACTURING PROCESSES (2016)
Experimental Investigations of Process Parameters Influence on Rheological Behavior and Dynamic Mechanical Properties of FDM Manufactured Parts
Omar Ahmed Mohamed et al.
MATERIALS AND MANUFACTURING PROCESSES (2016)
Adaptive Slicing in Additive Manufacturing Process Using a Modified Boundary Octree Data Structure
Nandkumar Siraskar et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2015)
Experimental determination of the permeability of engineering textiles: Benchmark II
N. Vernet et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)
Establishment of Process model for rapid prototyping technique (Stereolithography) to enhance the part quality by Taguchi method
B. S. Raju et al.
2ND INTERNATIONAL CONFERENCE ON INNOVATIONS IN AUTOMATION AND MECHATRONICS ENGINEERING, ICIAME 2014 (2014)
Surface roughness prediction in fused deposition modelling by neural networks
A. Boschetto et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
Turbine Blade Manufacturing Through Rapid Tooling (RT) Process and Its Quality Inspection
Aamir Iftikhar et al.
MATERIALS AND MANUFACTURING PROCESSES (2013)
Improving part quality and process efficiency in layered manufacturing by adaptive slicing
Stephane Danjou et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2010)
Representation of surface roughness in fused deposition modeling
Daekeon Ahn et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
A benchmark study on rapid prototyping processes and machines: quantitative comparisons of mechanical properties, accuracy, roughness, speed, and material cost
G. D. Kim et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2008)
Use of parameter estimation for stereolithography surface finish improvement
Benay Sager et al.
RAPID PROTOTYPING JOURNAL (2008)
Effect of processing conditions on the bonding quality of FDM polymer filaments
Q. Sun et al.
RAPID PROTOTYPING JOURNAL (2008)
Fabrication direction optimization to minimize post-machining in layered manufacturing
Daekeon Ahn et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2007)
Influence of process parameters on part shrinkage in SLS
Rong-Ji Wang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2007)
Using response surface methodology to optimize the stereolithography process
Gamal Weheba et al.
RAPID PROTOTYPING JOURNAL (2006)
Determination of process parameters in stereo lithography using neural network
ED Lee et al.
KSME INTERNATIONAL JOURNAL (2004)
The rapid prototyping technologies
S Upcraft et al.
ASSEMBLY AUTOMATION (2003)
Integrated genetic programming and genetic algorithm approach to predict surface roughness
M Brezocnik et al.
MATERIALS AND MANUFACTURING PROCESSES (2003)
Surface roughness visualisation for rapid prototyping models
RI Campbell et al.
COMPUTER-AIDED DESIGN (2002)
Critical parameters influencing the quality of prototypes in fused deposition modelling
R Anitha et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2001)
Effect of layer orientation on mechanical properties of rapid prototyped samples
OS Es-Said et al.
MATERIALS AND MANUFACTURING PROCESSES (2000)