A nonlinear seat suspension with high-static low-dynamic stiffness based on negative stiffness structure for helicopter

One of the most important issues for the helicopter pilots is the health risk due to the vibration transmitted to the pilot through the seat. In this article, a seat suspension based on negative stiffness structure is presented to decrease the vibration transmitted to the pilot in both vertical and lateral directions without losing the loading capacity of the system. Here, an integrated model of the suspension-cushion-occupant is derived. To generalize the results of system analysis and its usability in other applications, the impact of parameters on the system performance is studied in dimensionless form. Despite coupling between the lateral and vertical directions, the design parameters of the seat suspension are determined in such a way that the system responds simultaneously as a negative stiffness structure in both directions. The system efficiency in vibration damping is assessed by seat effective amplitude transmissibility and transmissibility criteria. In addition, the whole body vibration and impact of the vibration on the pilot body are evaluated using ISO-2631. To verify the system efficiency in more realistic situation, the simulations are performed using the measured vibration data of a Bell-412 helicopter. The results indicate that the vibration amplitude is decreased by about 45% and 48% in the lateral and vertical directions, respectively. The frequency spectrum comparison of the seat and cabin floor reveals 80% reduction of amplitude in fundamental frequency in the vertical direction, whereas it is about 93% in the lateral direction. Furthermore, the level of pilot's comfort and perception is improved that demonstrates better riding quality and reduced vibration environment.

Automated summary

This article presents a seat suspension based on negative stiffness structure to reduce vibration transmitted to helicopter pilots. By studying the impact of parameters on system performance, design parameters are determined to make the system respond simultaneously as a negative stiffness structure in both directions.