Related references
Note: Only part of the references are listed.Paper-based optoelectronic nose for identification of indoor air pollution caused by 3D printing thermoplastic filaments
Naira Dias Pinheiro et al.
ANALYTICA CHIMICA ACTA (2021)
Impact of metal additives on particle emission profiles from a fused filament fabrication 3D printer
Erik Alberts et al.
ATMOSPHERIC ENVIRONMENT (2021)
Characterization of Ultrafine Particles and VOCs Emitted from a 3D Printer
Sarka Bernatikova et al.
INTERNATIONAL JOURNAL OF ENVIRONMENTAL RESEARCH AND PUBLIC HEALTH (2021)
Three-Dimensional (3D) Printing: Implications for Risk Assessment and Management in Occupational Settings
Veruscka Leso et al.
ANNALS OF WORK EXPOSURES AND HEALTH (2021)
3D printer as a potential source of indoor air pollution
S. Wojtyla et al.
INTERNATIONAL JOURNAL OF ENVIRONMENTAL SCIENCE AND TECHNOLOGY (2020)
Chemical and Physical Characterization of 3D Printer Aerosol Emissions with and without a Filter Attachment
Erin F. Katz et al.
ENVIRONMENTAL SCIENCE & TECHNOLOGY (2020)
Three-dimensional printer emissions and employee exposures to ultrafine particles during the printing of thermoplastic filaments containing carbon nanotubes or carbon nanofibers
Kevin L. Dunn et al.
JOURNAL OF NANOPARTICLE RESEARCH (2020)
Characterizing particle emissions from a direct energy deposition additive manufacturing process and associated occupational exposure to airborne particles
Sebastien Bau et al.
JOURNAL OF OCCUPATIONAL AND ENVIRONMENTAL HYGIENE (2020)
Characterization of AISI 304L stainless steel powder recycled in the laser powder-bed fusion process
Austin T. Sutton et al.
ADDITIVE MANUFACTURING (2020)
Two-Dimensional Cellular and Three-Dimensional Bio-Printed Skin Models to Screen Topical-Use Compounds for Irritation Potential
Zhengxi Wei et al.
FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2020)
Reducing ultrafine particulate emission from multiple 3D printers in an office environment using a prototype engineering control
Kevin L. Dunn et al.
JOURNAL OF NANOPARTICLE RESEARCH (2020)
Emissions and health risks from the use of 3D printers in an occupational setting
Felix L. Chan et al.
JOURNAL OF TOXICOLOGY AND ENVIRONMENTAL HEALTH-PART A-CURRENT ISSUES (2020)
Recent developments in polymers/polymer nanocomposites for additive manufacturing
H. Wu et al.
PROGRESS IN MATERIALS SCIENCE (2020)
Emissions associated with operations of four different additive manufacturing or 3D printing technologies
Rachel E. Zisook et al.
JOURNAL OF OCCUPATIONAL AND ENVIRONMENTAL HYGIENE (2020)
Nanoparticle Exposure and Workplace Measurements During Processes Related to 3D Printing of a Metal Object
Alexander C. o. Jensen et al.
FRONTIERS IN PUBLIC HEALTH (2020)
Dynamic Analysis of Particle Emissions from FDM 3D Printers through a Comparative Study of Chamber and Flow Tunnel Measurements
Shirun Ding et al.
ENVIRONMENTAL SCIENCE & TECHNOLOGY (2020)
Exposure, assessment and health hazards of particulate matter in metal additive manufacturing: A review
Rui Chen et al.
CHEMOSPHERE (2020)
Characterization of particulate and gaseous pollutants emitted during operation of a desktop 3D printer
Jianwei Gu et al.
ENVIRONMENT INTERNATIONAL (2019)
VOC Emissions and Formation Mechanisms from Carbon Nanotube Composites during 3D Printing
Phillip M. Potter et al.
ENVIRONMENTAL SCIENCE & TECHNOLOGY (2019)
Potential occupational hazards of additive manufacturing
Gary A. Roth et al.
JOURNAL OF OCCUPATIONAL AND ENVIRONMENTAL HYGIENE (2019)
ExCeL: combining extrusion printing on cellulose scaffolds with lamination to create in vitro biological models
Alireza Shahin-Shamsabadi et al.
BIOFABRICATION (2019)
Particle and vapor emissions from vat polymerization desktop-scale 3-dimensional printers
A. B. Stefaniak et al.
JOURNAL OF OCCUPATIONAL AND ENVIRONMENTAL HYGIENE (2019)
Modeling Particle Emissions from Three-Dimensional Printing with Acrylonitrile-Butadiene-Styrene Polymer Filament
Tracy L. Zontek et al.
ENVIRONMENTAL SCIENCE & TECHNOLOGY (2019)
Considerations for emission monitoring and liner analysis of thermally manufactured sewer cured-in-place-pipes (CIPP)
Kyungyeon Ra et al.
JOURNAL OF HAZARDOUS MATERIALS (2019)
Insights Into Emissions and Exposures From Use of Industrial-Scale Additive Manufacturing Machines
A. B. Stefaniak et al.
SAFETY AND HEALTH AT WORK (2019)
Characterization of volatile organic compound emissions from consumer level material extrusion 3D printers
Aika Y. Davis et al.
BUILDING AND ENVIRONMENT (2019)
3D printing of musculoskeletal tissues: impact on safety and health at work
Mauro Petretta et al.
JOURNAL OF TOXICOLOGY AND ENVIRONMENTAL HEALTH-PART A-CURRENT ISSUES (2019)
Biomonitoring of Metal Exposure During Additive Manufacturing (3D Printing)
Stefan A. Ljunggren et al.
SAFETY AND HEALTH AT WORK (2019)
Fine particle emission during fused deposition modelling and thermogravimetric analysis for various filaments
Radomir Chylek et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Inhalation exposure to various nanoparticles in work environment-contextual information and results of measurements
Przemyslaw Oberbek et al.
JOURNAL OF NANOPARTICLE RESEARCH (2019)
The characteristics and formation mechanisms of emissions from thermal decomposition of 3D printer polymer filaments
Shirun Ding et al.
SCIENCE OF THE TOTAL ENVIRONMENT (2019)
Occupational exposure to gaseous and particulate contaminants originating from additive manufacturing of liquid, powdered, and filament plastic materials and related post-processes
Antti J. K. Vaisanen et al.
JOURNAL OF OCCUPATIONAL AND ENVIRONMENTAL HYGIENE (2019)
On-site three-dimensional printer aerosol hazard assessment: Pilot study of a portable in vitro exposure cassette
Nastassja A. Lewinski et al.
PROCESS SAFETY PROGRESS (2019)
Potential Hazards Not Communicated in Safety Data Sheets of Flavoring Formulations, Including Diacetyl and 2,3-Pentanedione
Ryan F. LeBouf et al.
ANNALS OF WORK EXPOSURES AND HEALTH (2019)
Evaluation of the amount of nanoparticles emitted in LASER additive manufacture/welding
J. F. Gomes et al.
INHALATION TOXICOLOGY (2019)
Characteristics of nanoparticle formation and hazardous air pollutants emitted by 3D printer operations: from emission to inhalation
Jong-Sang Youn et al.
RSC ADVANCES (2019)
Nanomaterials exposure as an occupational risk in metal additive manufacturing
M. Sousa et al.
6TH NANOSAFE INTERNATIONAL CONFERENCE (2019)
Evaluation of emissions and exposures at workplaces using desktop 3-dimensional printers
A. B. Stefaniak et al.
JOURNAL OF CHEMICAL HEALTH & SAFETY (2019)
3D bioprinting of functional tissue models for personalized drug screening and in vitro disease modeling
Xuanyi Ma et al.
ADVANCED DRUG DELIVERY REVIEWS (2018)
Total volatile organic compound emission evaluation and control for stereolithography additive manufacturing process
Yiran Yang et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Exposures during industrial 3-D printing and post-processing tasks
Sonette Du Preez et al.
RAPID PROTOTYPING JOURNAL (2018)
Safety Standards Aim to Rein in 3-D Printer Emissions
Janet Pelley
ACS CENTRAL SCIENCE (2018)
Three-dimensional printing with nano-enabled filaments releases polymer particles containing carbon nanotubes into air
Aleksandr B. Stefaniak et al.
INDOOR AIR (2018)
TITANIUM POWDERS USED IN POWDER BED FUSION: THEIR RELEVANCE TO RESPIRATORY HEALTH
S. Du Preez et al.
SOUTH AFRICAN JOURNAL OF INDUSTRIAL ENGINEERING (2018)
Airborne particle emission of a commercial 3D printer: the effect of filament material and printing temperature
L. Stabile et al.
INDOOR AIR (2017)
Evaluating Measuring Techniques for Occupational Exposure during Additive Manufacturing of Metals: A Pilot Study
Pal Graff et al.
JOURNAL OF INDUSTRIAL ECOLOGY (2017)
Aerosol Emissions from Fuse-Deposition Modeling 3D Printers in a Chamber and in Real Indoor Environments
Marina E. Vance et al.
ENVIRONMENTAL SCIENCE & TECHNOLOGY (2017)
Three-Dimensional (3D) Printers in Libraries: Perspective and Preliminary Safety Analysis
Neelam Bharti et al.
JOURNAL OF CHEMICAL EDUCATION (2017)
Addressing Hazardous Implications of Additive Manufacturing Complementing Life Cycle Assessment with a Framework for Evaluating Direct Human Health and Environmental Impacts
Justin Bours et al.
JOURNAL OF INDUSTRIAL ECOLOGY (2017)
Characterization of Emissions from a Desktop 3D Printer
Luis Mendes et al.
JOURNAL OF INDUSTRIAL ECOLOGY (2017)
Inter-comparison of personal monitors for nanoparticles exposure at workplaces and in the environment
Ana Maria Todea et al.
SCIENCE OF THE TOTAL ENVIRONMENT (2017)
An exposure assessment of desktop 3D printing
Tracy L. Zontek et al.
JOURNAL OF CHEMICAL HEALTH & SAFETY (2017)
Perspectives on Additive Manufacturing
David L. Bourell
ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 46 (2016)
The impact of manufacturing parameters on submicron particle emissions from a desktop 3D printer in the perspective of emission reduction
Yelin Deng et al.
BUILDING AND ENVIRONMENT (2016)
Nano-sized by-products from metal 3D printing, composite manufacturing and fabric production
Pelle Mellin et al.
JOURNAL OF CLEANER PRODUCTION (2016)
Characterization of emissions from a desktop 3D printer and indoor air measurements in office settings
Patrick Steinle
JOURNAL OF OCCUPATIONAL AND ENVIRONMENTAL HYGIENE (2016)
Emission of particulate matter from a desktop three-dimensional (3D) printer
Jinghai Yi et al.
JOURNAL OF TOXICOLOGY AND ENVIRONMENTAL HEALTH-PART A-CURRENT ISSUES (2016)
Characterization of particulate matters and total VOC emissions from a binder jetting 3D printer
Nima Afshar-Mohajer et al.
BUILDING AND ENVIRONMENT (2015)
Environmental, health, and safety issues in rapid prototyping
D. B. Short et al.
RAPID PROTOTYPING JOURNAL (2015)
Investigation of Ultrafine Particle Emissions of Desktop 3D Printers in the Clean Room
Yu Zhou et al.
9TH INTERNATIONAL SYMPOSIUM ON HEATING, VENTILATION AND AIR CONDITIONING (ISHVAC) JOINT WITH THE 3RD INTERNATIONAL CONFERENCE ON BUILDING ENERGY AND ENVIRONMENT (COBEE) (2015)
Ultrafine particle emissions from desktop 3D printers
Brent Stephens et al.
ATMOSPHERIC ENVIRONMENT (2013)
Additive manufacturing (AM) and nanotechnology: promises and challenges
Olga Ivanova et al.
RAPID PROTOTYPING JOURNAL (2013)
Charge-based personal aerosol samplers
Martin Fierz et al.
INHALATION TOXICOLOGY (2009)
Design and performance of an optimized electrical diffusion battery
Martin Fierz et al.
JOURNAL OF AEROSOL SCIENCE (2009)
Particle emission characteristics of office printers
Congrong He et al.
ENVIRONMENTAL SCIENCE & TECHNOLOGY (2007)
Occupational risk assessment on allergic contact dermatitis in a resin model making process
TY Chang et al.
JOURNAL OF OCCUPATIONAL HEALTH (2004)
Share Paper
