☆ 4.7 Article

Synthesis of coatings on SiC fibers and their effects on microstructure and mechanical properties of SiCf/SiBCN composites

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2021)

Related references

Note: Only part of the references are listed.

Review Materials Science, Multidisciplinary

Principles, design, structure and properties of ceramics for microwave absorption or transmission at high-temperatures

Daxin Li et al.

Summary: The multifunctional metastable SiBOCN system ceramics offer unique structure and adjustable dielectric properties for high-temperature applications, requiring rational co-design of multiscale structure and chemical composition. Key research areas include processing routes, microwave transmission and absorption mechanisms, material selection criteria, structure design principles, tunable microwave properties, and future challenges and prospects in this field.

INTERNATIONAL MATERIALS REVIEWS (2022)

Add to Collection

Article Materials Science, Ceramics

Oxidation/corrosion of BN-based coatings as prospective interphases for SiC/SiC composites

Paul Carminati et al.

Summary: The oxidation/corrosion behavior of SiC-based fibres and BN matrices with an interphase coating is crucial in determining the service life of ceramic matrix composites used as structural parts in aircraft engines. The presence of aluminium in the BN coating improves protection at high temperatures by forming alumina combined with borosilicate, whereas thin layers of pure BN exhibit reduced recession due to the formation of a sealing borosilicate phase at lower temperatures.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

Add to Collection

Article Materials Science, Ceramics

Improved ablation resistance of 3D-Cf/SiBCN composites with (PyC/SiC)3 multi-layers as interphase

Qi Ding et al.

Summary: The study found that 3D-Cf/SiBCN composites exhibit improved ablation resistance, with the amorphous SiBCN matrix oxidizing to form a borosilicate glass and SiC and Si3N4 grains precipitating and oxidizing to form a protective coating during ablation. The SiC layers in the (PyC/SiC)3 interphase effectively protect carbon fibers from ablation damage.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

Add to Collection

Article Materials Science, Ceramics

Electrospinning of pure polymer-derived SiBCN nanofibers with high yield

Qingqing Chen et al.

Summary: This paper discusses the synthesis of nanoscale silicoboron carbonitride (SiBCN) nanofibers using novel polyborosilazane precursor solutions by electrospinning, followed by pyrolysis. The influence of processing procedures on the fibers was investigated, with TGA and FT-IR used to analyze polymer-to-ceramic conversion, and SEM to characterize the final materials. The combination of precursor derived ceramics route and electrospinning process enables the production of SiBCN nanofibers for industrial applications.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Materials Science, Ceramics

3D characterization of the SiC nanoparticle distribution in ZrB2-SiC ceramics with synchrotron X-ray nanoscale computed tomography

Zhao He et al.

Summary: This paper reports on the 3D distribution characterization of nanosized SiC additives in ZrB2-SiC ceramics using synchrotron X-ray nano-CT technology and Morisita indexes. The study reveals the presence of SiC agglomerates in the ZrB2 matrix and variations in different regions of interest within the sample, as confirmed by the Morisita index.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Materials Science, Ceramics

Structure and mechanical properties of HNTs/SiBCN ceramic hybrid aerogels

Hongli Liu et al.

Summary: SiBCN ceramic aerogels have excellent properties but low mechanical strength, which hinders their application. Constructing HNTs/SiBCN dual network aerogels can improve their mechanical properties.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Characterization of PyC/SiC Interfaces with FIB-SEM Tomography

Jose David Arregui-Mena et al.

Summary: This study investigates the interface structure characteristics of pyrocarbon and silicon carbide in TRISO fuel, proposing a method for characterizing this interface. High-fidelity images collected using FIB-SEM tomography can provide a more in-depth interpretation of microstructural parameters and pore-shape analysis.

JOURNAL OF NUCLEAR MATERIALS (2021)

Add to Collection

Article Materials Science, Ceramics

Effects of surface roughness on CMAS corrosion behavior for thermal barrier coating applications

Lei Guo et al.

Summary: Reducing the surface roughness of thermal barrier coating materials such as YSZ, GdPO4, and LaPO4 improves their resistance to CMAS corrosion, as observed in this study.

JOURNAL OF ADVANCED CERAMICS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Effects of PyC shell thickness on the microstructure, ablation resistance of SiCnws/PyC-C/C-ZrC-SiC composites

Qinchuan He et al.

Summary: By increasing the PyC shell thickness in SiC nanowires/pyrocarbon core-shell structured composites, the density and thermal conductivity of the composites can be improved while reducing the coefficient of thermal expansion, ultimately enhancing the anti-ablation properties. However, there is an optimal PyC thickness where further increases can lead to an increase in ablation rates.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Enhanced ablation resistance of HfB2-HfC/SiBCN ceramics under an oxyacetylene torch environment

Qishuai Zhu et al.

Summary: By introducing nanosized HfB2, HfB2-HfC/SiBCN multiphase ceramics were fabricated with lower ablation rates and no cracks under combustion conditions, governed by oxidation of ceramic matrix, denudation of oxides, erosion by combustion flow, and re-oxidation of exposed matrix.

CORROSION SCIENCE (2021)

Add to Collection

Article Materials Science, Ceramics

Enhancement of the microwave absorption properties of PyC-SiCf/SiC composites by electrophoretic deposition of SiC nanowires on SiC fibers

Ben Huang et al.

CERAMICS INTERNATIONAL (2020)

Add to Collection

Article Materials Science, Ceramics

Effect of HfC addition on ablation behavior of SiBCN ceramics

Yuquan Wei et al.

CERAMICS INTERNATIONAL (2020)

Add to Collection

Review Materials Science, Multidisciplinary

Oxidation resistance of SiCf/SiC composites with a PyC/SiC multilayer interface at 500 °C to 1100°C

Lian-Yi Wang et al.

CORROSION SCIENCE (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Oxidation mechanism and kinetics of SiBCN/HfC ceramic composites at high temperatures

Yuquan Wei et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

Add to Collection

Article Materials Science, Ceramics

Incorporation of BN-coated carbon fibers into ZrB2/SiBCN ceramic composites and their ablation behavior

Yang Miao et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)

Add to Collection

Article Materials Science, Ceramics

Direct ink writing of continuous SiO2 fiber reinforced wave-transparent ceramics

Zhe Zhao et al.

JOURNAL OF ADVANCED CERAMICS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructure, mechanical properties and fracture mechanisms of ZrB2 ceramic reinforced A7075 composites fabricated by stir casting

Durga N. Vithal et al.

MATERIALS TODAY COMMUNICATIONS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Thermal damage and microstructure evolution mechanisms of Cf/SiBCN composites during plasma ablation

Qi Ding et al.

CORROSION SCIENCE (2020)

Add to Collection

Article Materials Science, Ceramics

Effect of BN/SiC interfacial coatings on the tensile properties of SiC/SiC minicomposites fabricated by PIP

Jianwei Dai et al.

CERAMICS INTERNATIONAL (2020)

Add to Collection

Article Materials Science, Ceramics

Self-healing enhancing tensile creep of 2D-satin weave SiC/(SiC-SiBCN)x composites in wet oxygen environment

Xingang Luan et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)

Add to Collection

Article Engineering, Mechanical

Tribological and mechanical behaviors of engine bearing with CuSn10 layer and h-BN/graphite coating prepared by spraying under different temperatures

Jun Cao et al.

TRIBOLOGY INTERNATIONAL (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Kinetics and dynamics of surface thermal oxidation in Al-ZrB2 nanocomposites

Shuaihang Pan et al.

CORROSION SCIENCE (2020)

Add to Collection

Article Materials Science, Ceramics

In situ Y2Si2O7 coatings on Hi-Nicalon-S SiC fibers: Phase formation and fiber strength

Emmanuel E. Boakye et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2019)

Add to Collection

Article Materials Science, Ceramics

Mechanical properties and thermal stability of carbon fiber cloth reinforced sol-derived mullite composites

Wei Zhang et al.

JOURNAL OF ADVANCED CERAMICS (2019)

Add to Collection

Article Materials Science, Ceramics

Fabrication of nearly stoichiometric polycrystalline SiC fibers with excellent high-temperature stability up to 1900 degrees C

Yanzi Gou et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Ablation behavior of functional gradient ceramic coating for porous carbon-bonded carbon fiber composites

Lin Xu et al.

CORROSION SCIENCE (2018)

Add to Collection

Article Materials Science, Ceramics

Effect of boron doping on fracture behavior of carbon fiber reinforced lithium aluminosilicate glass ceramics matrix composites

Long Xia et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2016)

Add to Collection

© Peeref 2019-2024. All rights reserved.