4.4 Article

Theory for designing mechanically stable single- and double-walled SiGe nanopeapods

Related references

Note: Only part of the references are listed.
Article Materials Science, Multidisciplinary

A theoretical scenario for the mechanical failure of boron carbide nanotubes

Azam Salmankhani et al.

Summary: The article investigates the mechanical properties of BC3NTs using molecular dynamics simulation, focusing on the effects of chirality, wall number, diameter, and temperature, as well as different types of defects. The results show that the mechanical properties of BC3NTs are limited by diameter and temperature, and adding additional walls can significantly improve their mechanical properties.

COMPUTATIONAL MATERIALS SCIENCE (2021)

Article Chemistry, Physical

Effect of homonuclear boron bonds in the adsorption of DNA nucleobases on boron nitride nanosheets

Alma Delia Ocotitla Munoz et al.

Summary: Quantum-mechanics calculations were performed within the density functional theory (DFT) scheme to analyze the interaction between DNA nucleobases and hexagonal boron nitride nanosheets. The results showed that pristine nanosheets exhibited a strong adsorption preference, while nanosheets with homonuclear boron bonds had even stronger interactions.

JOURNAL OF MOLECULAR LIQUIDS (2021)

Article Mechanics

Fracture mechanics of polycrystalline beryllium oxide nanosheets: A theoretical basis

Maryam Zarghami Dehaghani et al.

Summary: This study utilized Molecular Dynamics Simulation to investigate the mechanical properties of polycrystalline beryllium-oxide nanosheets, revealing that parameters such as grain number, temperature, and defects significantly affect their performance, with smaller cracks exhibiting lower fracture toughness.

ENGINEERING FRACTURE MECHANICS (2021)

Article Nanoscience & Nanotechnology

Boron Nitride Nanotube as an Antimicrobial Peptide Carrier: A Theoretical Insight

Maryam Zarghami Dehaghani et al.

Summary: Nanotube-based drug delivery systems are highly promising for drug encapsulation due to their strong penetration capability and large internal volume. Molecular dynamics simulation revealed that cationic antimicrobial peptide cRW3 was encapsulated in biocompatible boron nitride nanotube through van der Waals interaction, with a decrease in vdW interaction strength over time. This study provides valuable insights into the encapsulation behavior of drugs in nanotubes and their potential applications in drug delivery.

INTERNATIONAL JOURNAL OF NANOMEDICINE (2021)

Article Chemistry, Multidisciplinary

Quantum-mechanical assessment of the adsorption of nitric oxide molecules on the magnetic carbon nitride (C36N24)- fullerene

Heber Nicolas Vergara-Reyes et al.

Summary: By using calculations based on density functional theory, we analyzed the adsorption of nitric oxide molecules on carbon nitride fullerene. The saturation point was found to be when ten molecules are adsorbed, and the systems exhibit high intrinsic magnetism and metallic behavior.

STRUCTURAL CHEMISTRY (2021)

Article Materials Science, Multidisciplinary

A theoretical insight into the fracture behavior of the edge-cracked polycrystalline BC3 nanosheets

Ali Dadrasi et al.

Summary: The study found that the mechanical properties of monocrystalline BC3 nanosheets decreased with increasing temperature or crack length, with higher properties achieved in the armchair direction. Stress intensity followed a similar trend with temperature but increased with crack length. For polycrystalline BC3 nanosheets, their properties were lower than the corresponding monocrystalline BC3 nanosheets at 300K.

COMPUTATIONAL MATERIALS SCIENCE (2021)

Article Mechanics

Fracture behavior of SiGe nanosheets: Mechanics of monocrystalline vs. polycrystalline structure

Maryam Zarghami Dehaghani et al.

Summary: The study on the mechanical properties of silicon-germanium nanosheets at high temperatures reveals that the material performance decreases as the temperature rises, while the increase in grain size and randomness also reduce the elastic modulus and failure strength. Furthermore, the increase in crack and notch size, as well as temperature, have a detrimental effect on the material's properties.

ENGINEERING FRACTURE MECHANICS (2021)

Article Biochemical Research Methods

Fracture fingerprint of polycrystalline C3N nanosheets: Theoretical basis

Babak Bagheri et al.

Summary: The fracture behavior of polycrystalline carbon nanosheets, modeled using heterogeneous graphitic carbon nitride, was studied through molecular dynamics simulations. It was found that increasing the number of grain boundaries and crack length resulted in a significant decrease in Young's modulus, while small cracks exhibited higher fracture toughness. This theoretical approach can be generalized to capture the unique fracture fingerprint of different types of polycrystalline carbon structures.

JOURNAL OF MOLECULAR GRAPHICS & MODELLING (2021)

Article Materials Science, Multidisciplinary

Effect of point defects and low-density carbon-doped on mechanical properties of BNNTs: A molecular dynamics study

A. R. Aibooyeh et al.

MATERIALS CHEMISTRY AND PHYSICS (2020)

Article Materials Science, Multidisciplinary

Conductive biomaterials as nerve conduits: Recent advances and future challenges

Payam Zarrintaj et al.

APPLIED MATERIALS TODAY (2020)

Article Materials Science, Multidisciplinary

Li containing endohedral SWCNT: DFT study of the structural and electronic properties

F. A. Zubieta-Lopez et al.

DIAMOND AND RELATED MATERIALS (2020)

Article Chemistry, Multidisciplinary

Insight into the Self-Insertion of a Protein Inside the Boron Nitride Nanotube

Maryam Zarghami Dehaghani et al.

ACS OMEGA (2020)

Article Materials Science, Coatings & Films

Electrical and mechanical properties of polyimide composite films reinforced by ultralong titanate nanotubes

He Zhao et al.

SURFACE & COATINGS TECHNOLOGY (2019)

Review Materials Science, Multidisciplinary

One-dimensional SiC nanostructures: Designed growth, properties, and applications

Shanliang Chen et al.

PROGRESS IN MATERIALS SCIENCE (2019)

Article Chemistry, Physical

Silicon-Germanium bilayer sputtered onto a carbon nanotube sheet as anode material for lithium-ion batteries

Nasr Bensalah et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Article Chemistry, Physical

Mechanical properties of silicon-germanium nanotubes: A molecular dynamics study

A. Dadrasi et al.

APPLIED SURFACE SCIENCE (2019)

Article Chemistry, Inorganic & Nuclear

Computational simulations of ZnO@GaN and GaN@ZnO core@shell nanotubes

N. L. Marana et al.

JOURNAL OF SOLID STATE CHEMISTRY (2018)

Article Materials Science, Multidisciplinary

DFT study of Ni, Cu, Cd and Ag heavy metal atom adsorption onto the surface of the zinc-oxide nanotube and zinc-oxide graphene-like structure

A. Hamed Mashhadzadeh et al.

MATERIALS CHEMISTRY AND PHYSICS (2018)

Article Engineering, Mechanical

Using Taguchi approach for optimizing mechanical properties of hybrid laminates nanocomposite

Amin Hamed Mashhadzadeh et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING (2017)

Article Polymer Science

Cure kinetics of epoxy/MWCNTs nanocomposites: Nonisothermal calorimetric and rheokinetic techniques

Mohammad Reza Saeb et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2017)

Article Chemistry, Multidisciplinary

A Low-Cost, Self-Standing NiCo2O4@CNT/CNT Multilayer Electrode for Flexible Asymmetric Solid-State Supercapacitors

Peng Wu et al.

ADVANCED FUNCTIONAL MATERIALS (2017)

Article Materials Science, Multidisciplinary

Influence of interwall interaction in double -walled aluminogermanate nanotubes on mechanical properties

Chih-Han Liu et al.

COMPUTATIONAL MATERIALS SCIENCE (2017)

Article Engineering, Environmental

Highly curable epoxy/MWCNTs nanocomposites: An effective approach to functionalization of carbon nanotubes

Mohammad Reza Saeb et al.

CHEMICAL ENGINEERING JOURNAL (2015)

Review Engineering, Multidisciplinary

On the modeling of carbon nanotubes: A critical review

Roham Rafiee et al.

COMPOSITES PART B-ENGINEERING (2014)

Article Nanoscience & Nanotechnology

Small scale effects on the stability of carbon nano-peapods under radial pressure

M. Asghari et al.

PHYSICA E-LOW-DIMENSIONAL SYSTEMS & NANOSTRUCTURES (2011)

Article Nanoscience & Nanotechnology

The structure, energetics and thermal evolution of SiGe nanotubes

Xin Liu et al.

NANOTECHNOLOGY (2009)

Article Materials Science, Multidisciplinary

Stability of single-wall silicon carbide nanotubes - molecular dynamics simulations

Yongfeng Zhang et al.

COMPUTATIONAL MATERIALS SCIENCE (2008)

Article Crystallography

Investigation of the thermal conductivity of a fullerene peapod by molecular dynamics simulation

Takahiro Kawamura et al.

JOURNAL OF CRYSTAL GROWTH (2008)

Article Materials Science, Multidisciplinary

Compressive and tensile properties of Ar filled carbon nano-peapods

Haijun Shen

MATERIALS LETTERS (2007)

Article Multidisciplinary Sciences

Large-scale molecular dynamics simulation of DNA: implementation and validation of the AMBER98 force field in LAMMPS

C Grindon et al.

PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2004)

Article Multidisciplinary Sciences

Nanotechnology - Thin solid films roll up into nanotubes

OG Schmidt et al.

NATURE (2001)

Article Chemistry, Physical

Formation mechanism of fullerene peapods and coaxial tubes: a path to large scale synthesis

BW Smith et al.

CHEMICAL PHYSICS LETTERS (2000)

Article Chemistry, Physical

Mass-production of boron nitride double-wall nanotubes and nanococoons

J Cumings et al.

CHEMICAL PHYSICS LETTERS (2000)

Article Chemistry, Physical

Mechanical properties, defects and electronic behavior of carbon nanotubes

MB Nardelli et al.

CARBON (2000)