4.7 Article

Shortened processing duration of high-performance Sm-Co-Fe-Cu-Zr magnets by stress-aging

Related references

Note: Only part of the references are listed.
Article Materials Science, Multidisciplinary

Influences of stress-aging on the precipitation behavior of δ phase (Ni3Nb) in a nickel-based superalloy

Hao Cheng et al.

Summary: The precipitation behaviors of delta phases in a nickel-based superalloy are investigated under stress-free and stress aging tests. It is found that extra stress can accelerate the uniform precipitation of delta phase and increase dislocation substructures. Basket-weave delta phases precipitate regularly and densely within grains during stress aging, enhancing subgrain formation and resulting in uniform microstructures.

MATERIALS & DESIGN (2021)

Article Materials Science, Multidisciplinary

Atomic scale understanding of the defects process in concurrent recrystallization and precipitation of Sm-Co-Fe-Cu-Zr alloys

Xin Song et al.

Summary: The study investigated the process of concurrent recrystallization and precipitation in a supersaturated hexagonal Sm(Co, Fe, Cu, Zr)(7.5) alloy using transmission electron microscopy. It found that the formation and dissociation of defects play a crucial role in the transformation of the matrix and formation of precipitates. The growth velocities of recrystallized cells and precipitates are closely related to defects density, with faster growth at early stages and slower growth at later stages.

ACTA MATERIALIA (2021)

Article Materials Science, Multidisciplinary

Microstructure refinement assisted by α-recrystallization in a peritectic TiAl alloy

Jieren Yang et al.

Summary: Fine-grained nearly-lamellar (FGNL) microstructures and ultrafine alpha(2)/gamma lamellar microstructures were successfully obtained by means of alpha-recrystallization in a Tie48Ale2Nb e2Cr alloy. The microstructure refinement is governed by small-strain alpha-deformation, with dominating continuous dynamic recrystallization (CDRX) responsible for lamellar grain refinement.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

Article Chemistry, Applied

Revisiting the pinning sites in 2:17-type Sm-Co-Fe-Cu-Zr permanent magnets

Xianglong Zhou et al.

Summary: The study shows that tuning the second-step aging time can effectively enlarge the volume fraction of Zr-enriched 1:3R platelets without changing the volume fraction of CBs, which helps to provide important insights into understanding the hard magnetism of pinning-controlled permanent magnets.

JOURNAL OF RARE EARTHS (2021)

Article Materials Science, Multidisciplinary

Grain boundary optimization induced substantial squareness enhancement and high performance in iron-rich Sm-Co-Fe-Cu-Zr magnets

Jun Cao et al.

Summary: By optimizing the grain boundary and adjusting the solution process, significant improvement in squareness was achieved in iron-rich Sm-Co-Fe-Cu-Zr magnets, resulting in an excellent maximum energy product. It was revealed that the grain boundary phases and micro-twins' density in grain interiors can be controlled to interpret the enhancement mechanism of squareness.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Article Materials Science, Multidisciplinary

The formation mechanism of 1:5H phase in Sm(Co, Fe, Cu, Zr)z melt-spun ribbons with high iron content

Cheng Xu et al.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2020)

Article Materials Science, Multidisciplinary

Defects-aggregated cell boundaries induced domain wall curvature change in Fe-rich Sm-Co-Fe-Cu-Zr permanent magnets

Wentao Jia et al.

JOURNAL OF MATERIALS SCIENCE (2020)

Article Nanoscience & Nanotechnology

Identifications of SmCo5 and Smn+1Co5n-1-type phases in 2:17-type Sm-Co-Fe-Cu-Zr permanent magnets

Xianglong Zhou et al.

SCRIPTA MATERIALIA (2020)

Article Chemistry, Physical

Internal structure evolution of L12 variants in aged Fe-Ga alloys

Junming Gou et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Article Materials Science, Multidisciplinary

Role of primary Zr-rich particles on microstructure and magnetic properties of 2:17-type Sm-Co-Fe-Cu-Zr permanent magnets

Tao Yuan et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)

Article Materials Science, Multidisciplinary

Nanoscale short-range ordering induced cellular structure and microchemistry evolution in Sm2Co17-type magnets

Haichen Wu et al.

ACTA MATERIALIA (2020)

Article Chemistry, Physical

Material and magnetic properties of Sm2(Co, Fe, Cu, Zr)17 permanent magnets processed by Spark Plasma Sintering

Alexander J. Mackie et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Article Materials Science, Multidisciplinary

Attractive-domain-wall-pinning controlled Sm-Co magnets overcome the coercivity-remanence trade-off

Hansheng Chen et al.

ACTA MATERIALIA (2019)

Article Chemistry, Physical

Influence of stress on γ precipitation behavior in Inconel 718 during aging

Hailong Qin et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

Article Materials Science, Multidisciplinary

Crystalline and magnetic microstructures of iron-rich Sm (Co0.65Fe0.26Cu0.07Zr0.02)(7.8) sintered magnets: Isothermal aging effect

Kuikui Song et al.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2018)

Article Multidisciplinary Sciences

Atomic structure and domain wall pinning in samarium-cobalt-based permanent magnets

M. Duerrschnabel et al.

NATURE COMMUNICATIONS (2017)

Article Nanoscience & Nanotechnology

The precipitation behavior of Al-Cu-Mg-Ag single crystal during aging under elevated compression stresses

Zhiguo Chen et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

Article Materials Science, Multidisciplinary

Magnetic properties and microstructures of high-performance Sm2Co17 based alloy

Wei Sun et al.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2015)

Article Materials Science, Multidisciplinary

Evaluation of microstructure anisotropy on room and medium temperature ECAP deformed F138 steel

N. S. De Vincentis et al.

MATERIALS CHARACTERIZATION (2015)

Article Materials Science, Multidisciplinary

Effects of stress-aging on the microstructure and properties of an aging forming Al-Cu-Mg-Ag alloy

Xiao Yan Liu et al.

MATERIALS & DESIGN (2014)

Article Nanoscience & Nanotechnology

Microstructures and mechanical properties of high performance Mg-6Gd-3Y-2Nd-0.4Zr alloy by indirect extrusion and aging treatment

Xuan Liu et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)

Article Chemistry, Physical

Mechanism and kinetics of static globularization in TA15 titanium alloy with transformed structure

X. G. Fan et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2012)

Article Physics, Multidisciplinary

Novel Mixed-Mode Phase Transition Involving a Composition-Dependent Displacive Component

S. Nag et al.

PHYSICAL REVIEW LETTERS (2011)

Article Materials Science, Multidisciplinary

Evolution of magnetic domain structures and coercivity in high-performance SmCo 2:17-type permanent magnets

O Gutfleisch et al.

ACTA MATERIALIA (2006)

Article Materials Science, Multidisciplinary

The microstructure of sintered Sm(Co0.72Fe0.20Cu0.055Zr0.025)7.5 permanent magnet studied by atom probe

XY Xiong et al.

ACTA MATERIALIA (2004)

Article Materials Science, Multidisciplinary

A concise model for mixed-mode phase transformations in the solid state

J Sietsma et al.

ACTA MATERIALIA (2004)

Article Materials Science, Multidisciplinary

Stress aging of Al-xCu alloys:: Experiments

AW Zhu et al.

ACTA MATERIALIA (2001)

Article Physics, Applied

Domain wall pinning in high temperature SM(Co, Fe, Cu, Zr)7-8 magnets

B Streibl et al.

JOURNAL OF APPLIED PHYSICS (2000)

Article Engineering, Electrical & Electronic

High temperature 2 : 17 magnets: Relationship of magnetic properties to microstructure and processing

GC Hadjipanayis et al.

IEEE TRANSACTIONS ON MAGNETICS (2000)