Related references
Note: Only part of the references are listed.Investigation of Portevin-Le Chatelier effect during Erichsen test
L. Z. Mansouri et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2020)
Determination of the Forming-Limit Diagram from Deformations within Necking Instability: A Digital Image Correlation-Based Approach
A. Roatta et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2020)
Continuous dynamic recrystallization in a Zn-Cu-Ti sheet subjected to bilinear tensile strain
M. Leonard et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
A general and unified theory of the kinematic relationships in bulge tests
Kelin Chen
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2020)
On mechanical response of Zircaloy-4 under a wider range of stress states: From uniaxial tension to uniaxial compression
Marcelo Paredes et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2020)
Characterization of the Elastoplastic Response of Low Zn-Cu-Ti Alloy Sheets Using the CPB-06 Criterion
Francisco Alister et al.
MATERIALS (2019)
Creep behaviour of eutectic Zn-Al-Cu-Mg alloys
Zhicheng Wu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Prediction of earing defect and deep drawing behavior of commercially pure titanium sheets using CPB06 anisotropy yield theory
Anubhav Singh et al.
JOURNAL OF MANUFACTURING PROCESSES (2018)
On the benefits of a stress criterion for the simulation of cup drawing process
Yann Jansen et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2017)
Effect of yield criteria on the formability prediction of dual-phase steel sheets
C. Cheng et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2017)
Crystallographic Texture Evolution of a Zinc Sheet Subjected to Different Strain Paths
Fernando Schlosser et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2017)
Modeling of tension-compression asymmetry and orthotropy on metallic materials: Numerical implementation and validation
P. D. Barros et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2016)
Effects of anisotropy on material hardening and burst in the bulge test
Kelin Chen et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2016)
Research on a Zn-Cu alloy as a biodegradable material for potential vascular stents application
Jialin Niu et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)
Prediction of forming limit curves for nonlinear loading paths using quadratic and non-quadratic yield criteria and variable imperfection factor
Morteza Nurcheshmeh et al.
MATERIALS & DESIGN (2016)
Ncorr: Open-Source 2D Digital Image Correlation Matlab Software
J. Blaber et al.
EXPERIMENTAL MECHANICS (2015)
An elasto-plastic constitutive model for evolving asymmetric/anisotropic hardening behavior of AZ31B and ZEK100 magnesium alloy sheets considering monotonic and reverse loading paths
Waqas Muhammad et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2015)
Experimental and Visco-Plastic Self-Consistent evaluation of forming limit diagrams for anisotropic sheet metals: An efficient and robust implementation of the M-K model
C. Schwindt et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2015)
Anisotropy and tension-compression asymmetry modeling of the room temperature plastic response of Ti-6Al-4V
V. Tuninetti et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2015)
Combined effects of anisotropy and tension-compression asymmetry on the torsional response of AZ31 Mg
Nitin Chandola et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2015)
Modeling of the mechanical behavior and texture evolution in Zn alloys during reverse shear loading
Marina Borodachenkova et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)
An experimental and numerical investigation of different shear test configurations for sheet metal characterization
Qing Yin et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2014)
Anisotropic mechanical behavior and formability criterion for zinc sheets
Marc Milesi et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2014)
Correlation between swift effects and tension-compression asymmetry in various polycrystalline materials
Benoit Revil-Baudard et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2014)
Impact of anisotropy and viscosity to model the mechanical behavior of Ti-6Al-4V alloy
V. Tuninetti et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
An anisotropic stress based criterion to predict the formability and the fracture mechanism of textured zinc sheets
Yann Jansen et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2013)
Constitutive modeling of AZ31 sheet alloy with application to axial crushing
Jonghun Yoon et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
The effects of anisotropic yield functions and their material parameters on prediction of forming limit diagrams
Prasad Dasappa et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2012)
Numerical simulation and experimental validation of the microindentation test applied to bulk elastoplastic materials
Diego J. Celentano et al.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2012)
Compression test for metal characterization using digital image correlation and inverse modeling
V. Tuninetti et al.
IUTAM SYMPOSIUM ON FULL-FIELD MEASUREMENTS AND IDENTIFICATION IN SOLID MECHANICS, 2011 (2012)
Orthotropic strain rate potential for the description of anisotropy in tension and compression of metals
Oana Cazacu et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2010)
A multi-scale approach for high cycle anisotropic fatigue resistance: Application to forged components
M. Milesi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Comparison of the work-hardening of metallic sheets using tensile and shear strain paths
S. Thuillier et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2009)
Development of simple shear test for the measurement of work hardening
Y. G. An et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
Orthotropic yield criteria for description of the anisotropy in tension and compression of sheet metals
B. Plunkett et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2008)
Elastic-viscoplastic anisotropic modeling of textured metals and validation using the Taylor cylinder impact test
B. Plunkett et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2007)
Calculation of the slip system activity in deformed zinc single crystals using digital 3-D image correlation data
J. N. Florando et al.
PHILOSOPHICAL MAGAZINE LETTERS (2006)
Anisotropic yield function of hexagonal materials taking into account texture development and anisotropic hardening
B. Plunkett et al.
ACTA MATERIALIA (2006)
Orthotropic yield criterion for hexagonal closed packed metals
O Cazacu et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2006)
Experimental and simulation textures in an asymmetrically rolled zinc alloy sheet
F Zhang et al.
SCRIPTA MATERIALIA (2004)
Share Paper
