Related references
Note: Only part of the references are listed.MRI-Based Quantitative Osteoporosis Imaging at the Spine and Femur
Nico Sollmann et al.
JOURNAL OF MAGNETIC RESONANCE IMAGING (2021)
Single shot echo planar imaging (ssEPI) vs single shot turbo spin echo (ssTSE) DWI of the orbit in patients with ocular melanoma
Ekim Gumeler et al.
BRITISH JOURNAL OF RADIOLOGY (2021)
Magnetic Resonance Imaging of the Brain Using Compressed Sensing - Quality Assessment in Daily Clinical Routine
Sebastian Moench et al.
CLINICAL NEURORADIOLOGY (2020)
Using 3D-Printed Mesh-Like Brain Cortex with Deep Structures for Planning Intracranial EEG Electrode Placement
Ramin Javan et al.
JOURNAL OF DIGITAL IMAGING (2020)
Use of 3-Dimensional Printing Technology in Complex Spine Surgeries
Ran Lador et al.
WORLD NEUROSURGERY (2020)
A three-dimensional color-printed system allowing complete modeling of arteriovenous malformations for surgical simulations
Xun Ye et al.
JOURNAL OF CLINICAL NEUROSCIENCE (2020)
Quantitative Ultrashort Echo Time (UTE) Magnetic Resonance Imaging of Bone: An Update
Ya-Jun Ma et al.
FRONTIERS IN ENDOCRINOLOGY (2020)
Clinical situations for which 3D printing is considered an appropriate representation or extension of data contained in a medical imaging examination: adult cardiac conditions
Arafat Ali et al.
3D PRINTING IN MEDICINE (2020)
Radiological Society of North America (RSNA) 3D Printing Special Interest Group (SIG) clinical situations for which 3D printing is considered an appropriate representation or extension of data contained in a medical imaging examination: abdominal, hepatobiliary, and gastrointestinal conditions
David H. Ballard et al.
3D PRINTING IN MEDICINE (2020)
UTE-mDixon-based thorax synthetic CT generation
Kuan-Hao Su et al.
MEDICAL PHYSICS (2019)
Preoperative breast volume evaluation of one-stage immediate breast reconstruction using three-dimensional surface imaging and a printed mold
Keng Chen et al.
JOURNAL OF THE CHINESE MEDICAL ASSOCIATION (2019)
Black bone MRI with 3D reconstruction for the detection of skull fractures in children with suspected abusive head trauma
Stephen F. Kralik et al.
NEURORADIOLOGY (2019)
CAIPIRINHA-Dixon-TWIST (CDT)-VIBE MR imaging of the liver at 3.0T with gadoxetate disodium: a solution for transient arterial-phase respiratory motion-related artifacts?
Leonhard Gruber et al.
EUROPEAN RADIOLOGY (2018)
Short T-2 imaging using a 3D double adiabatic inversion recovery prepared ultrashort echo time cones (3D DIR-UTE-Cones) sequence
Ya-Jun Ma et al.
MAGNETIC RESONANCE IN MEDICINE (2018)
3D printed phantoms mimicking cortical bone for the assessment of ultrashort echo time magnetic resonance imaging
Robba Rai et al.
MEDICAL PHYSICS (2018)
Development and validation of 3D printed virtual models for robot-assisted radical prostatectomy and partial nephrectomy: urologists' and patients' perception
Francesco Porpiglia et al.
WORLD JOURNAL OF UROLOGY (2018)
Three-Dimensional Radial VIBE Sequence for Contrast-Enhanced Brain Imaging: An Alternative for Reducing Motion Artifacts in Restless Children
Ji Eun Park et al.
AMERICAN JOURNAL OF ROENTGENOLOGY (2018)
Systematic Review of Synthetic Computed Tomography Generation Methodologies for Use in Magnetic Resonance Imaging-Only Radiation Therapy
Emily Johnstone et al.
INTERNATIONAL JOURNAL OF RADIATION ONCOLOGY BIOLOGY PHYSICS (2018)
Virtual surgical planning, flow simulation, and 3-dimensional electrospinning of patient-specific grafts to optimize Fontan hemodynamics
Dominik Siallagan et al.
JOURNAL OF THORACIC AND CARDIOVASCULAR SURGERY (2018)
A comparison of readout segmented EPI and interleaved EPI in high resolution diffusion weighted imaging
Yishi Wang et al.
MAGNETIC RESONANCE IMAGING (2018)
Feasibility of using an inversion-recovery ultrashort echo time (UTE) sequence for quantification of glenoid bone loss
Ya-jun Ma et al.
SKELETAL RADIOLOGY (2018)
Three-dimensional Printing and Augmented Reality: Enhanced Precision for Robotic Assisted Partial Nephrectomy
Nicole Wake et al.
UROLOGY (2018)
Using Three-Dimensional Printing to Create Individualized Cranial Nerve Models for Skull Base Tumor Surgery
Jiye Lin et al.
WORLD NEUROSURGERY (2018)
Deep learning for undersampled MRI reconstruction
Chang Min Hyun et al.
PHYSICS IN MEDICINE AND BIOLOGY (2018)
Susceptibility weighted imaging: Clinical applications and future directions
Ahmet Mesrur Halefoglu et al.
WORLD JOURNAL OF RADIOLOGY (2018)
Innovation in the imaging of perianal fistula: a step towards personalised medicine
Kapil Sahnan et al.
THERAPEUTIC ADVANCES IN GASTROENTEROLOGY (2018)
Three-Dimensional Printed Model and Virtual Reconstruction: An Extra Tool for Pediatric Solid Tumors Surgery
Angela Sanchez-Sanchez et al.
EUROPEAN JOURNAL OF PEDIATRIC SURGERY REPORTS (2018)
Multimaterial 3D printing preoperative planning for frontoethmoidal meningoencephalocele surgery
Giselle Coelho et al.
CHILDS NERVOUS SYSTEM (2018)
MRI-only treatment planning: benefits and challenges
Amir M. Owrangi et al.
PHYSICS IN MEDICINE AND BIOLOGY (2018)
Three-dimensional printing of MRI-visible phantoms and MR image-guided therapy simulation
Dimitris Mitsouras et al.
MAGNETIC RESONANCE IN MEDICINE (2017)
Utility and Scope of Rapid Prototyping in Patients with Complex Muscular Ventricular Septal Defects or Double-Outlet Right Ventricle: Does it Alter Management Decisions?
Puneet Bhatla et al.
PEDIATRIC CARDIOLOGY (2017)
Three-dimensional printed models for surgical planning of complex congenital heart defects: an international multicentre study
Israel Valverde et al.
EUROPEAN JOURNAL OF CARDIO-THORACIC SURGERY (2017)
Free-breathing dynamic liver examination using a radial 3D T1-weighted gradient echo sequence with moderate undersampling for patients with limited breath-holding capacity
Benjamin Kaltenbach et al.
EUROPEAN JOURNAL OF RADIOLOGY (2017)
Development of a Patient-Specific 3D-Printed Liver Model for Preoperative Planning
Marta J. Madurska et al.
SURGICAL INNOVATION (2017)
Three-Dimensional Liver Surgery Simulation: Computer-Assisted Surgical Planning with Three-Dimensional Simulation Software and Three-Dimensional Printing
Yukio Oshiro et al.
TISSUE ENGINEERING PART A (2017)
New Directions in 3D Medical Modeling: 3D-Printing Anatomy and Functions in Neurosurgical Planning
Paolo Gargiulo et al.
JOURNAL OF HEALTHCARE ENGINEERING (2017)
3D printed renal cancer models derived from MRI data: application in pre-surgical planning
Nicole Wake et al.
ABDOMINAL RADIOLOGY (2017)
Conjoined twins - role of imaging and recent advances
Rishi Philip Mathew et al.
JOURNAL OF ULTRASONOGRAPHY (2017)
Evaluation of pre-surgical models for uterine surgery by use of three-dimensional printing and mold casting
Sayed Ahmad Zikri Bin Sayed Aluwee et al.
RADIOLOGICAL PHYSICS AND TECHNOLOGY (2017)
Three-dimensional-printed cardiac prototypes aid surgical decision-making and preoperative planning in selected cases of complex congenital heart diseases: Early experience and proof of concept in a resource-limited environment
Mahesh Kappanayil et al.
ANNALS OF PEDIATRIC CARDIOLOGY (2017)
Black Bone MRI: a novel imaging technique for 3D printing
Karen A. Eley et al.
DENTOMAXILLOFACIAL RADIOLOGY (2017)
Application of Virtual Three-Dimensional Models for Simultaneous Visualization of Intracardiac Anatomic Relationships in Double Outlet Right Ventricle
Kanwal M. Farooqi et al.
PEDIATRIC CARDIOLOGY (2016)
Use of 3D Prototypes for Complex Surgical Oncologic Cases
Lucas Krauel et al.
WORLD JOURNAL OF SURGERY (2016)
Computer-Based Vertebral Tumor Cryoablation Planning and Procedure Simulation Involving Two Cases Using MRI-Visible 3D Printing and Advanced Visualization
Jeffrey P. Guenette et al.
AMERICAN JOURNAL OF ROENTGENOLOGY (2016)
Application of anatomically accurate, patient-specific 3D printed models from MRI data in urological oncology
N. Wake et al.
CLINICAL RADIOLOGY (2016)
The accuracy of ultrashort echo time MRI sequences for medical additive manufacturing
Maureen van Eijnatten et al.
DENTOMAXILLOFACIAL RADIOLOGY (2016)
Use of three-dimensional models to assist in the resection of malignant cardiac tumors
Odeaa Al Jabbari et al.
JOURNAL OF CARDIAC SURGERY (2016)
3D printing based on cardiac CT assists anatomic visualization prior to transcatheter aortic valve replacement
Beth Ripley et al.
JOURNAL OF CARDIOVASCULAR COMPUTED TOMOGRAPHY (2016)
Use of a Three Dimensional Printed Cardiac Model to Assess Suitability for Biventricular Repair
Kanwal M. Farooqi et al.
WORLD JOURNAL FOR PEDIATRIC AND CONGENITAL HEART SURGERY (2016)
Surgical planning and microvascular reconstruction of the mandible with a fibular flap using computer-aided design, rapid prototype modelling, and precontoured titanium reconstruction plates: a prospective study
R. Sieira Gil et al.
BRITISH JOURNAL OF ORAL & MAXILLOFACIAL SURGERY (2015)
3D Printed Models for Planning Endovascular Stenting in Transverse Aortic Arch Hypoplasia
Israel Valverde et al.
CATHETERIZATION AND CARDIOVASCULAR INTERVENTIONS (2015)
Improved operative efficiency of free fibula flap mandible reconstruction with patient-specific, computer-guided preoperative planning
Julia M. Toto et al.
HEAD AND NECK-JOURNAL FOR THE SCIENCES AND SPECIALTIES OF THE HEAD AND NECK (2015)
Implant Positioning in TKA: Comparison Between Conventional and Patient-Specific Instrumentation
Ferdinando Ferrara et al.
ORTHOPEDICS (2015)
Reducing acquisition time in clinical MRI by data undersampling and compressed sensing reconstruction
Kieren Grant Hollingsworth
PHYSICS IN MEDICINE AND BIOLOGY (2015)
Future Image Acquisition Trends for PET/MRI
Andreas Boss et al.
SEMINARS IN NUCLEAR MEDICINE (2015)
Individualized Physical 3-dimensional Kidney Tumor Models Constructed From 3-dimensional Printers Result in Improved Trainee Anatomic Understanding
Margaret Knoedler et al.
UROLOGY (2015)
Fat-suppressed, three-dimensional T1-weighted imaging using high-acceleration parallel acquisition and a dual-echo Dixon technique for gadoxetic acid-enhanced liver MRI at 3T
Jeong Hee Yoon et al.
ACTA RADIOLOGICA (2015)
Three-dimensional patient-specific cardiac model for surgical planning in Nikaidoh procedure
Israel Valverde et al.
CARDIOLOGY IN THE YOUNG (2015)
Streamlined, Inexpensive 3D Printing of the Brain and Skull
Jason S. Naftulin et al.
PLOS ONE (2015)
Physical Models of Renal Malignancies Using Standard Cross-sectional Imaging and 3-Dimensional Printers: A Pilot Study
Jonathan L. Silberstein et al.
UROLOGY (2014)
Computer-assisted design and rapid prototype modeling in microvascular mandible reconstruction
Matthew M. Hanasono et al.
LARYNGOSCOPE (2013)
Three-Dimensional Print of a Liver for Preoperative Planning in Living Donor Liver Transplantation
Nizar N. Zein et al.
LIVER TRANSPLANTATION (2013)
Preoperative Three-Dimensional Model Creation of Magnetic Resonance Brain Images as a Tool to Assist Neurosurgical Planning
B. S. Spottiswoode et al.
STEREOTACTIC AND FUNCTIONAL NEUROSURGERY (2013)
Detection of Microhemorrhage in Posterior Reversible Encephalopathy Syndrome Using Susceptibility-Weighted Imaging
A. M. McKinney et al.
AMERICAN JOURNAL OF NEURORADIOLOGY (2012)
Three-Dimensional Printing of Models for Preoperative Planning and Simulation of Transcatheter Valve Replacement
Daniel Schmauss et al.
ANNALS OF THORACIC SURGERY (2012)
Comparison of optimized soft-tissue suppression schemes for ultrashort echo time MRI
Cheng Li et al.
MAGNETIC RESONANCE IN MEDICINE (2012)
Clinical Applications of Physical 3D Models Derived From MDCT Data and Created by Rapid Prototyping
Steven J. Esses et al.
AMERICAN JOURNAL OF ROENTGENOLOGY (2011)
Preliminary application of computer-assisted patient-specific acetabular navigational template for total hip arthroplasty in adult single development dysplasia of the hip
Yuan Z. Zhang et al.
INTERNATIONAL JOURNAL OF MEDICAL ROBOTICS AND COMPUTER ASSISTED SURGERY (2011)
MRI with Zero Echo Time: Hard versus Sweep Pulse Excitation
Markus Weiger et al.
MAGNETIC RESONANCE IN MEDICINE (2011)
High Resolution Diffusion-Weighted Imaging Using Readout-Segmented Echo-Planar Imaging, Parallel Imaging and a Two-Dimensional Navigator-Based Reacquisition
David A. Porter et al.
MAGNETIC RESONANCE IN MEDICINE (2009)
Three-dimensional printing creates models for surgical planning of aortic valve replacement after previous coronary bypass grafting
Ralf Sodian et al.
ANNALS OF THORACIC SURGERY (2008)
Clinical Application of Rapid Prototype Model in Pediatric Proximal Femoral Corrective Osteotomy
Shuo-Suei Hung et al.
ORTHOPEDICS (2008)
3D-Imaging of cardiac structures using 3D heart models for planning in heart surgery: a preliminary study
S. Jacobs et al.
Interactive Cardiovascular and Thoracic Surgery (2007)
Sparse MRI: The application of compressed sensing for rapid MR imaging
Michael Lustig et al.
MAGNETIC RESONANCE IN MEDICINE (2007)
Stereolithographic models for surgical planning in congenital heart surgery
Ralf Sodian et al.
ANNALS OF THORACIC SURGERY (2007)
Mapping complex tissue architecture with diffusion spectrum magnetic resonance imaging
VJ Wedeen et al.
MAGNETIC RESONANCE IN MEDICINE (2005)
Magnetic resonance: An introduction to ultrashort TE (UTE) imaging
MD Robson et al.
JOURNAL OF COMPUTER ASSISTED TOMOGRAPHY (2003)
Share Paper
