Related references
Note: Only part of the references are listed.Effect of fiber content on mechanical performance and cracking characteristics of ultra-high-performance seawater sea-sand concrete (UHP-SSC)
Bo-Tao Huang et al.
ADVANCES IN STRUCTURAL ENGINEERING (2021)
Effect of mixing method on the performance of alkali-activated fly ash/slag pastes along with polycarboxylate admixture
Yazan Alrefaei et al.
CEMENT & CONCRETE COMPOSITES (2021)
Seawater sea-sand engineered/strain-hardening cementitious composites (ECC/SHCC): Assessment and modeling of crack characteristics
Bo-Tao Huang et al.
CEMENT AND CONCRETE RESEARCH (2021)
Recent advances in molecular dynamics simulation of the N-A-S-H geopolymer system: modeling, structural analysis, and dynamics
Ling-Yu Xu et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Engineered/strain-hardening cementitious composites (ECC/SHCC) with an ultra-high compressive strength over 210 MPa
Bo-Tao Huang et al.
COMPOSITES COMMUNICATIONS (2021)
Influence of coal fly ash on the early performance enhancement and formation mechanisms of silico-aluminophosphate geopolymer
Yan-Shuai Wang et al.
CEMENT AND CONCRETE RESEARCH (2020)
Strength and Microstructure of Class-C Fly Ash and GGBS Blend Geopolymer Activated in NaOH & NaOH + Na2SiO3
Sasui Sasui et al.
MATERIALS (2020)
Shear behavior of captive- and short- column effects using different basalt aggregate contents
Norhan Shahrour et al.
JOURNAL OF BUILDING ENGINEERING (2020)
Effect of old mortar pore structure on relative humidity response of recycled aggregate concrete
Chao Liu et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
High-strength seawater sea-sand Engineered Cementitious Composites (SS-ECC): Mechanical performance and probabilistic modeling
Bo-Tao Huang et al.
CEMENT & CONCRETE COMPOSITES (2020)
Reinforcement corrosion in limestone flash calcined clay cement-based concrete
Quang Dieu Nguyen et al.
CEMENT AND CONCRETE RESEARCH (2020)
Experimental study on full-volume fly ash geopolymer mortars: Sintered fly ash versus sand as fine aggregates
Lan-Ping Qian et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Seawater sea-sand Engineered Cementitious Composites (SS-ECC) for marine and coastal applications
Bo-Tao Huang et al.
COMPOSITES COMMUNICATIONS (2020)
Use of Coal Bottom Ash and CaO-CaCl2-Activated GGBFS Binder in the Manufacturing of Artificial Fine Aggregates through Cold-Bonded Pelletization
Dongho Jeon et al.
MATERIALS (2020)
Effect of sodium carbonate/sodium silicate activator on the rheology, geopolymerization and strength of fly ash/slag geopolymer pastes
G. Ishwarya et al.
CEMENT & CONCRETE COMPOSITES (2019)
The effectiveness of different superplasticizers in ambient cured one-part alkali activated pastes
Yazan Alrefaei et al.
CEMENT & CONCRETE COMPOSITES (2019)
The Influence of Heat and Mechanical Treatment of Concrete Rubble on the Properties of Recycled Aggregate Concrete
Edyta Pawluczuk et al.
MATERIALS (2019)
Silico-Aluminophosphate and Alkali-Aluminosilicate Geopolymers: A Comparative Review
Yan-Shuai Wang et al.
FRONTIERS IN MATERIALS (2019)
Life cycle assessment of autoclaved aerated fly ash and concrete block production: a case study in China
Yifei Shi et al.
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2019)
Development of Strain-Induced Stresses in Early Age Concrete Composed of Recycled Gravel or Sand
Brice Delsaute et al.
JOURNAL OF ADVANCED CONCRETE TECHNOLOGY (2019)
Nanoscale Ordering and Depolymerization of Calcium Silicate Hydrates in the Presence of Alkalis
Nishant Garg et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2019)
Fresh and Hardened Properties of Fly Ash-Slag Blended Geopolymer Paste and Mortar
Subhashree Samantasinghar et al.
INTERNATIONAL JOURNAL OF CONCRETE STRUCTURES AND MATERIALS (2019)
The production and properties of cold-bonded aggregate and its applications in concrete: A review
Feras Tajra et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Waste ceramic powder-based geopolymer mortars: Effect of curing temperature and alkaline solution-to-binder ratio
Parham Shoaei et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Effect of synthesis parameters on compressive strength of fly ash-slag blended geopolymer
Subhashree Samantasinghar et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Impact of use of steel slag as coarse aggregate and wastewater on fresh and hardened properties of concrete
Shekhar Saxena et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Enhancing mechanical and durability properties of recycled aggregate concrete
George Dimitriou et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Tensile behavior and microstructure of hybrid fiber ambient cured one-part engineered geopolymer composites
Yazan Alrefaei et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Determination of optimized geopolymerization factors on the properties of pelletized fly ash aggregates
K. N. Shivaprasad et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Construction and demolition waste generation and properties of recycled aggregate concrete: A global perspective
Ali Akhtar et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Phase characterizations, physical properties and strength of environment-friendly cold-bonded fly ash lightweight aggregates
Chalermphan Narattha et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Preparation of cleaner one-part geopolymer by investigating different types of commercial sodium metasilicate in China
Cong Ma et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Alternation of traditional cement mortars using fly ash-based geopolymer mortars modified by slag
Jun Shang et al.
JOURNAL OF CLEANER PRODUCTION (2018)
A comparison study of the fresh and hardened properties of normal weight and lightweight aggregate concretes
Payam Shafigh et al.
JOURNAL OF BUILDING ENGINEERING (2018)
Structural concrete using sintered flyash lightweight aggregate: A review
Manu S. Nadesan et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Effect of aggregate saturation degree on the freeze-thaw resistance of high performance polypropylene fiber lightweight aggregate concrete
Cong Zhu et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Creep and drying shrinkage of a blended slag and low calcium fly ash geopolymer Concrete
A. Castel et al.
MATERIALS AND STRUCTURES (2016)
Lightweight aggregates produced by granulation of peat-wood fly ash with alkali activator
Juho Yliniemi et al.
INTERNATIONAL JOURNAL OF MINERAL PROCESSING (2016)
High performance of treated and washed MSWI bottom ash granulates as natural aggregate replacement within earth-moist concrete
A. Keulen et al.
WASTE MANAGEMENT (2016)
Use of OPC to improve setting and early strength properties of low calcium fly ash geopolymer concrete cured at room temperature
Pradip Nath et al.
CEMENT & CONCRETE COMPOSITES (2015)
Effects of sodium hydroxide and sodium silicate solutions on compressive and shear bond strengths of FA-GBFS geopolymer
Tanakorn Phoo-ngernkham et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Accelerated curing effects on the mechanical performance of cold bonded and sintered fly ash aggregate concrete
P. Gomathi et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
High calcium fly ash geopolymer mortar containing Portland cement for use as repair material
Tanakorn Phoo-ngernkham et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Recycling of MSWI fly ash by means of cementitious double step cold bonding pelletization: Technological assessment for the production of lightweight artificial aggregates
Francesco Colangelo et al.
JOURNAL OF HAZARDOUS MATERIALS (2015)
Grey Forecasting of Construction Demand in Hong Kong over the Next Ten Years
Yongtao Tan et al.
INTERNATIONAL JOURNAL OF CONSTRUCTION MANAGEMENT (2015)
Effect of GGBFS on setting, workability and early strength properties of fly ash geopolymer concrete cured in ambient condition
Pradip Nath et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Influence of curing conditions on properties of high calcium fly ash geopolymer containing Portland cement as additive
Saengsuree Pangdaeng et al.
MATERIALS & DESIGN (2014)
Variation in hybrid cements over time. Alkaline activation of fly ash-portland cement blends
I. Garcia-Lodeiro et al.
CEMENT AND CONCRETE RESEARCH (2013)
Properties of high calcium fly ash geopolymer pastes with Portland cement as an additive
Tanakorn Phoo-ngernkham et al.
INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2013)
Manufacture and performance of cold bonded lightweight aggregate using alkaline activators for high performance concrete
Le Anh-tuan Bui et al.
CONSTRUCTION AND BUILDING MATERIALS (2012)
The effect of sodium silicate and sodium hydroxide on the strength of aggregates made from coal fly ash using the geopolymerisation method
Hamzah Fansuri et al.
ASIA-PACIFIC JOURNAL OF CHEMICAL ENGINEERING (2012)
Durability of lightweight concretes with lightweight fly ash aggregates
Niyazi Ugur Kockal et al.
CONSTRUCTION AND BUILDING MATERIALS (2011)
Manufacture of artificial aggregate using MSWI bottom ash
R. Cioffi et al.
WASTE MANAGEMENT (2011)
Water absorption in internally cured mortar made with water-filled lightweight aggregate
Ryan Henkensiefken et al.
CEMENT AND CONCRETE RESEARCH (2009)
Workability and strength behaviour of concrete with cold-bonded fly ash aggregate
Glory Joseph et al.
MATERIALS AND STRUCTURES (2009)
The role of inorganic polymer technology in the development of 'green concrete'
Peter Duxson et al.
CEMENT AND CONCRETE RESEARCH (2007)
Influence of fineness of fly ash on the aggregate pelletization process
R. Manikandan et al.
CEMENT & CONCRETE COMPOSITES (2007)
Influence of binders on properties of sintered fly ash aggregate
K Ramamurthy et al.
CEMENT & CONCRETE COMPOSITES (2006)
Mechanical properties of recycled aggregate concrete under uniaxial loading
JZ Xiao et al.
CEMENT AND CONCRETE RESEARCH (2005)
Utilization of fly ash by pelletization process;: theory, application areas and research results
G Baykal et al.
RESOURCES CONSERVATION AND RECYCLING (2000)
Share Paper
