Related references
Note: Only part of the references are listed.Effects of curved vortex generators on the air-side performance of fin-and-tube heat exchangers
Gaofeng Lu et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2019)
Numerical study on the natural convection from horizontal finned tubes with small and large fin temperature variations
Shwin-Chung Wong et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2019)
Numerical study on heat transfer enhancement of thermal energy storage systems considering radiation of molten salt
Yanlong Zhu et al.
SOLAR ENERGY (2019)
An experimental investigation on the air-side heat transfer and flow resistance of finned short oval tubes at different tube tilt angles
Sebastian Unger et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2019)
Comparative study of heat transfer enhancement and pressure drop for fin-and-circular tube compact heat exchangers with sinusoidal wavy and elliptical curved rectangular winglet vortex generator
Ashish J. Modi et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)
Parametric design exploration of fin-and-oval tube compact heat exchangers performance with a new type of corrugated fin patterns
Ahmadali Gholami et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2019)
Large Eddy Simulation of transitional flows in an elliptical finned-tube heat exchanger
Ephraim Toubiana et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2019)
Analysis on heat transfer and pressure drop of fin-and-oval-tube heat exchangers with tear-drop delta vortex generators
Gaofeng Lu et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)
Experimental and numerical investigation of the cross-flow PCM heat exchanger for the energy saving of building HVAC
Patcharapit Promoppatum et al.
ENERGY AND BUILDINGS (2017)
Thermal-hydraulic performance of fin-and-oval tube compact heat exchangers with innovative design of corrugated fin patterns
Ahmadali Gholami et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)
Experimental study on the effects of fin pitches and tube diameters on the heat transfer and fluid flow characteristics of a fin punched with curved delta-winglet vortex generators
Xiang Wu et al.
APPLIED THERMAL ENGINEERING (2017)
Experimental and numerical study on the thermal performance of ground source heat pump with a set of designed buried pipes
Xiang-Ri Kong et al.
APPLIED THERMAL ENGINEERING (2017)
Numerical investigation for finding the appropriate design parameters of a fin-and-tube heat exchanger with delta-winglet vortex generators
M. Behfard et al.
HEAT AND MASS TRANSFER (2016)
The fluid flow and heat transfer characteristics in the channel formed by flat tube and dimpled fin
Xiu-Qin Wei et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2016)
Thermal energy charging behaviour of a heat exchange device with a zigzag plate configuration containing multi-phase-change-materials (m-PCMs)
Peilun Wang et al.
APPLIED ENERGY (2015)
CFD analysis of the impact of physical parameters on evaporative cooling by a mist spray system
Hamid Montazeri et al.
APPLIED THERMAL ENGINEERING (2015)
Evaporative cooling by water spray systems: CFD simulation, experimental validation and sensitivity analysis
H. Montazeri et al.
BUILDING AND ENVIRONMENT (2015)
Determination of heat transfer formulas for gas flow in fin-and-tube heat exchanger with oval tubes using CFD simulations
Dawid Taler et al.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2014)
Thermal contact resistance in plate fin-and-tube heat exchangers, determined by experimental data and CFD simulations
Dawid Taler et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2014)
Three-dimensional performance analysis of plain fin tube heat exchangers in transitional regime
Arafat A. Bhuiyan et al.
APPLIED THERMAL ENGINEERING (2013)
Parametric study and multiple correlations on air-side heat transfer and friction characteristics of fin-and-tube heat exchangers with large number of large-diameter tube rows
Gongnan Xie et al.
APPLIED THERMAL ENGINEERING (2009)
COMPARISONS OF PERFORMANCES OF A FLAT TUBE BANK FIN MODEL MOUNTED VORTEX GENERATORS AND THE REAL HEAT EXCHANGER
L. B. Wang et al.
EXPERIMENTAL HEAT TRANSFER (2009)
A comparative study on the air-side performance of wavy fin-and-tube heat exchanger with punched delta winglets in staggered and in-line arrangements
Liting Tian et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2009)
A study on heat transfer characteristics for staggered tube banks in cross-flow
Seong-Yeon Yoo et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2007)
Effect of geometrical parameters on heat transfer and pressure drop characteristics of plate fin and tube heat exchangers
A Erek et al.
APPLIED THERMAL ENGINEERING (2005)
Numerical study of fin-spacing effects in annular-finned tube heat exchangers
MS Mon et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2004)
Experimental study on heat transfer enhancement of a helically baffled heat exchanger combined with three-dimensional finned tubes
ZG Zhang et al.
APPLIED THERMAL ENGINEERING (2004)
The effect of the number of tube rows on heat, mass and momentum transfer in flat-plate finned tube heat exchangers
F Halici et al.
ENERGY (2001)
Heat transfer and friction characteristics of plain fin-and-tube heat exchangers, part I: new experimental data
CC Wang et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2000)
Heat transfer and friction characteristics of plain fin-and-tube heat exchangers, part II: Correlation
CC Wang et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2000)
Heat transfer and friction characteristics of fin-and-tube heat exchangers
WM Yan et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2000)
Effect of fin spacing on convection in a plate fin and tube heat exchanger
R Romero-Mendez et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2000)