Related references
Note: Only part of the references are listed.Mechanistic models for additive manufacturing of metallic components
H. L. Wei et al.
PROGRESS IN MATERIALS SCIENCE (2021)
Influence of gas atmosphere (Ar or He) on the laser powder bed fusion of a Ni-based alloy
S. Traore et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)
Physical mechanisms in hybrid additive manufacturing: A process design framework
Samantha Webster et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)
Multi-laser scan strategies for enhancing creep performance in LPBF
Salome Sanchez et al.
ADDITIVE MANUFACTURING (2021)
The creep behaviour of nickel alloy 718 manufactured by laser powder bed fusion
S. Sanchez et al.
MATERIALS & DESIGN (2021)
Microstructure modelling for metallic additive manufacturing: a review
Joel Heang Kuan Tan et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2020)
On the Dwell-Fatigue Crack Propagation Behavior of a High-Strength Ni-Base Superalloy Manufactured by Selective Laser Melting
Dunyong Deng et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2020)
Experimental Investigation on the LCF Behavior Affected by Manufacturing Defects and Creep Damage of One Selective Laser Melting Nickel-Based Superalloy at 815 °C
Xiao-An Hu et al.
ACTA METALLURGICA SINICA-ENGLISH LETTERS (2020)
Investigation of dissolution behavior of laves phase in inconel 718 fabricated by laser directed energy deposition
Shang Sui et al.
ADDITIVE MANUFACTURING (2020)
Investigation of the IN-738 superalloy microstructure and mechanical properties for the manufacturing of gas turbine engine nozzle guide vane by selective laser melting
A. V. Sotov et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
A Review on Laser Powder Bed Fusion of Inconel 625 Nickel-Based Alloy
Zhihua Tian et al.
APPLIED SCIENCES-BASEL (2020)
Development of processing strategies for multigraded selective laser melting of Ti6Al4V and IN718
Marco Giuseppe Scaramuccia et al.
POWDER TECHNOLOGY (2020)
Multi-physics continuum modelling approaches for metal powder additive manufacturing: a review
Shekhar Srivastava et al.
RAPID PROTOTYPING JOURNAL (2020)
Torsional behavior of additively manufactured nickel alloy 718 under monotonic loading and low cycle fatigue
Volodymyr P. Sabelkin et al.
MATERIALS TODAY COMMUNICATIONS (2020)
Effects of surface roughness and build thickness on fatigue properties of selective laser melted Inconel 718 at 650 °C
H. Y. Wan et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
Effect of heat treatment on the modification of microstructure of selective laser melted (SLM) IN718 and its consequences on mechanical behavior
Rj Vikram et al.
JOURNAL OF MATERIALS RESEARCH (2020)
Developing very strong texture in a nickel-based superalloy by selective laser melting with an ultra-high power and flat-top laser beam
Yachao Wang et al.
MATERIALS CHARACTERIZATION (2020)
Effect of yttrium addition on creep properties of a Ni-base superalloy built up by selective laser melting
Koji Kakehi et al.
SCRIPTA MATERIALIA (2020)
Assessment of grain structure evolution with resonant ultrasound spectroscopy in additively manufactured nickel alloys
Jeff Rossin et al.
MATERIALS CHARACTERIZATION (2020)
Response of different electron beam melting produced Alloy 718 microstructures to thermal post-treatments
Tejas Gundgire et al.
MATERIALS CHARACTERIZATION (2020)
Subsurface grain refinement in electron beam-powder bed fusion of Alloy 718: Surface texture and oxidation performance
Esmaeil Sadeghi et al.
MATERIALS CHARACTERIZATION (2020)
Design and Tailoring of Alloys for Additive Manufacturing
T. M. Pollock et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2020)
In-SituMonitoring for Defect Identification in Nickel Alloy Complex Geometries Fabricated by L-PBF Additive Manufacturing
J. Logan McNeil et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2020)
Neural network based image segmentation for spatter extraction during laser-based powder bed fusion processing
Zhenbiao Tan et al.
OPTICS AND LASER TECHNOLOGY (2020)
Laser Powder-Bed Fusion as an Alloy Development Tool: Parameter Selection for In-Situ Alloying Using Elemental Powders
Leonardo Shoji Aota et al.
MATERIALS (2020)
Influence of Laser Powder Bed Fusion Process Parameters on Voids, Cracks, and Microhardness of Nickel-Based Superalloy Alloy 247LC
Olutayo Adegoke et al.
MATERIALS (2020)
High-temperature tensile and high cycle fatigue properties of inconel 625 alloy manufactured by laser powder bed fusion
Kyu-Sik Kim et al.
ADDITIVE MANUFACTURING (2020)
'Unit cell' type scan strategies for powder bed fusion: The Hilbert fractal
Roshan Sebastian et al.
ADDITIVE MANUFACTURING (2020)
A residual heat compensation based scan strategy for powder bed fusion additive manufacturing
H. Yeung et al.
MANUFACTURING LETTERS (2020)
Combined Thermo-Mechanical Techniques for Post-processing of the SLM-Printed Ni-Cr-Fe Alloy Parts
Dmytro Lesyk et al.
ADVANCES IN DESIGN, SIMULATION AND MANUFACTURING III: MANUFACTURING AND MATERIALS ENGINEERING, VOL 1 (2020)
Monitoring and detection of meltpool and spatter regions in laser powder bed fusion of super alloy Inconel 625
Lihang Yang et al.
PROGRESS IN ADDITIVE MANUFACTURING (2020)
Experimental Studies on Laser Additive Manufacturing of Inconel-625 Structures Using Powder Bed Fusion at 100 μm Layer Thickness
S. K. Nayak et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2020)
Effect of miniaturization and surface roughness on the mechanical properties of the electron beam melted superalloy Inconel®718
D. Kotzem et al.
PROGRESS IN ADDITIVE MANUFACTURING (2020)
CM-220404-5444625 Toward a better understanding of phase transformations in additive manufacturing of Alloy 718
Chamara Kumara et al.
MATERIALIA (2020)
Notched fatigue testing of Inconel 718 prepared by selective laser melting
D. B. Witkin et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2019)
Microstructural Evolution and Phase Transformation on the X-Y Surface of Inconel 718 Ni-Based Alloys Fabricated by Selective Laser Melting under Different Heat Treatment
Liu Peng et al.
HIGH TEMPERATURE MATERIALS AND PROCESSES (2019)
Grain boundary and microstructure engineering of Inconel 690 cladding on stainless-steel 316L using electron-beam powder bed fusion additive manufacturing
I. A. Segura et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)
On the role of powder flow behavior in fluid thermodynamics and laser processability of Ni-based composites by selective laser melting
Dongdong Gu et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2019)
Fragmentation and refinement behavior and underlying thermodynamic mechanism of WC reinforcement during selective laser melting of Ni-based composites
Mujian Xia et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Characterization of Inconel 625 fabricated using powder-bed-based additive manufacturing technologies
J. A. Gonzalez et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)
Effect of processing parameters on thermal behavior and related density in GH3536 alloy manufactured by selective laser melting
Liang Zhang et al.
JOURNAL OF MATERIALS RESEARCH (2019)
EBM-manufactured single tracks of Alloy 718: Influence of energy input and focus offset on geometrical and microstructural characteristics
Paria Karimi et al.
MATERIALS CHARACTERIZATION (2019)
On the solidification behaviour and cracking origin of a nickel-based superalloy during selective laser melting
Chunlei Qiu et al.
MATERIALS CHARACTERIZATION (2019)
Comparative investigation of small punch creep resistance of Inconel 718 fabricated by selective laser melting
L. Y. Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Laser welding of a selective laser melted Ni-base superalloy: Microstructure and high temperature mechanical property
XiaoAn Hu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Heat treatment of Inconel 718 produced by selective laser melting: Microstructure and mechanical properties
Wenpu Huang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Varied heat treatments and properties of laser powder bed printed Inconel 718
Runbo Jiang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Microstructural evolution and phase transformation of Inconel 718 alloys fabricated by selective laser melting under different heat treatment
Peng Liu et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
Laser additive manufacturing of nano-TiC reinforced Ni-based nanocomposites with tailored microstructure and performance
Dongdong Gu et al.
COMPOSITES PART B-ENGINEERING (2019)
Experimental evaluation on elevated temperature fatigue and tensile properties of one selective laser melted nickel based superalloy
Z. H. Jiao et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
Notch-defect interaction in additively manufactured Inconel 718
K. Solberg et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
Influence of the focus offset on the defects, microstructure, and mechanical properties of an Inconel 718 superalloy fabricated by electron beam additive manufacturing
Hae-Jin Lee et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Multiscale characterization of microstructures and mechanical properties of Inconel 718 fabricated by selective laser melting
Sharniece Holland et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Anomalous Notch Rupture Behavior of Nickel-Based Superalloy Inconel 718 Due to Fabrication by Additive Manufacturing
David B. Witkin et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2019)
Effect of scanning strategy and speed on the microstructure and mechanical properties of selective laser melted IN718 nickel-based superalloy
Mostafa Amirjan et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Assessment of mechanical properties and fatigue performance of a selective laser melted nickel-base superalloy Inconel 718
Changhao Pei et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Effect of Powder Recycling in Electron Beam Melting on the Surface Chemistry of Alloy 718 Powder
Hans Gruber et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2019)
Features of VZhL21 Nickel-Base Superalloy Structure Formation During Selective Laser Melting, Vacuum Heat Treatment, and Hot Isostatic Compaction
D. I. Sukhov et al.
METALLURGIST (2019)
Oxide and spatter powder formation during laser powder bed fusion of Hastelloy X
A. N. D. Gasper et al.
POWDER TECHNOLOGY (2019)
Multi-Laser Powder Bed Fusion Benchmarking-Initial Trials with Inconel 625
H. Wong et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Metal additive manufacturing in the commercial aviation industry: A review
Annamaria Gisario et al.
JOURNAL OF MANUFACTURING SYSTEMS (2019)
Mitigation of anisotropic fatigue in nickel alloy 718 manufactured via selective laser melting
Volodymyr P. Sabelkin et al.
MATERIALS & DESIGN (2019)
Microstructural evolution and mechanical properties of IN718 alloy fabricated by selective laser melting following different heat treatments
Jing Li et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Effect of Different Post-treatments on the Microstructure of EBM-Built Alloy 718
Sneha Goel et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2019)
Microstructural influence on fatigue crack propagation during high cycle fatigue testing of additively manufactured Alloy 718
Arun Ramanathan Balachandramurthi et al.
MATERIALS CHARACTERIZATION (2019)
Modeling and simulation of thermal field and solidification in laser powder bed fusion of nickel alloy IN625
Yigit M. Arisoy et al.
OPTICS AND LASER TECHNOLOGY (2019)
The crystal growth, intercellular spacing and microsegregation of selective laser melted Inconel 718 superalloy
Pan Tao et al.
VACUUM (2019)
Additive Manufacturing of Alloy 718 via Electron Beam Melting: Effect of Post-Treatment on the Microstructure and the Mechanical Properties
Arun Ramanathan Balachandramurthi et al.
MATERIALS (2019)
On the effect of spatter particles distribution on the quality of Hastelloy X parts made by laser powder-bed fusion additive manufacturing
Reza Esmaeilizadeh et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
The influence of Laves phases on the room temperature tensile properties of Inconel 718 fabricated by powder feeding laser additive manufacturing
Shang Sui et al.
ACTA MATERIALIA (2019)
Effect of process parameters on melt pool geometry and microstructure development for electron beam melting of IN718: A systematic single bead analysis study
Xiao Ding et al.
ADDITIVE MANUFACTURING (2019)
Selective laser melting of typical metallic materials: An effective process prediction model developed by energy absorption and consumption analysis
Y. H. Zhou et al.
ADDITIVE MANUFACTURING (2019)
A Framework for Optimizing Process Parameters in Powder Bed Fusion (PBF) Process Using Artificial Neural Network (ANN)
Mallikharjun Marrey et al.
47TH SME NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE (NAMRC 47) (2019)
Machining influence on the fatigue resistance of Inconel 718 fabricated by Selective Laser Melting (SLM)
S. Periane et al.
FATIGUE DESIGN 2019, INTERNATIONAL CONFERENCE ON FATIGUE DESIGN, 8TH EDITION (2019)
Investigation of the interface between SLM processed nickel alloy on a cast iron substrate
Roshan Sebastian et al.
PROGRESS IN ADDITIVE MANUFACTURING (2019)
Microstructure and mechanical properties of the Inconel 718 superalloy manufactured by selective laser melting
K. Sh Mukhtarova et al.
LETTERS ON MATERIALS (2019)
Effect of structural support on microstructure of nickel base superalloy fabricated by laser-powder bed fusion additive manufacturing
Hyeyun Song et al.
ADDITIVE MANUFACTURING (2019)
High-temperature mechanical properties of alloy 718 produced by laser powder bed fusion with different processing parameters
Alexandra Hilaire et al.
ADDITIVE MANUFACTURING (2019)
Common defects and contributing parameters in powder bed fusion AM process and their classification for online monitoring and control: a review
Ehsan Malekipour et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Additive Manufacturing of Nickel-Base Superalloy IN100 Through Scanning Laser Epitaxy
Amrita Basak et al.
JOM (2018)
Effect of heat treatment on the microstructural evolution of a nickel-based superalloy additive-manufactured by laser powder bed fusion
Fan Zhang et al.
ACTA MATERIALIA (2018)
Hot cracking mechanism affecting a non-weldable Ni-based superalloy produced by selective electron Beam Melting
Edouard Chauvet et al.
ACTA MATERIALIA (2018)
Enhancing Fatigue Strength of Selective Laser Melting-Fabricated Inconel 718 by Tailoring Heat Treatment Route
Hong-Yuan Wan et al.
ADVANCED ENGINEERING MATERIALS (2018)
Thermal dynamic behavior during selective laser melting of K418 superalloy: numerical simulation and experimental verification
Zhen Chen et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2018)
Development of WC-Inconel composites using selective laser melting
Q. B. Nguyen et al.
ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2018)
Data-driven multi-scale multi-physics models to derive process-structure-property relationships for additive manufacturing
Wentao Yan et al.
COMPUTATIONAL MECHANICS (2018)
Macroscopic thermal finite element modeling of additive metal manufacturing by selective laser melting process
Yancheng Zhang et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2018)
Fatigue life prediction of additively manufactured material: Effects of surface roughness, defect size, and shape
A. Yadollahi et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2018)
Hot compression behavior and microstructure of selectively laser-melted IN718 alloy
Ahmad Mostafa et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Thermal and molten pool model in selective laser melting process of Inconel 625
Erdem Kundakcioglu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Long fatigue crack propagation behavior of Inconel 625 processed by laser powder bed fusion: Influence of build orientation and post-processing conditions
J. -R. Poulin et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
Microstructure evolution, mechanical response and underlying thermodynamic mechanism of multi-phase strengthening WC/Inconel 718 composites using selective laser melting
Mujian Xia et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Effect of heat treatment on microstructure evolution of Inconel 718 alloy fabricated by selective laser melting
Xing Li et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Measurement of the Melt Pool Length During Single Scan Tracks in a Commercial Laser Powder Bed Fusion Process
J. C. Heigel et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2018)
A modeling study of stress and strain formation induced during melting process in powder-bed electron beam melting for Ni superalloy
Satoshi Tadano et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
Influence of SLM process parameters on the surface finish, porosity rate and fatigue behavior of as-built Inconel 625 parts
Imade Koutiri et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
Creep behaviour of inconel 718 processed by laser powder bed fusion
Zhengkai Xu et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
Defects and 3D structural inhomogeneity in electron beam additively manufactured Inconel 718
Andrew T. Polonsky et al.
MATERIALS CHARACTERIZATION (2018)
Characterization of texture and grain boundary character distributions of selective laser melted Inconel 625 alloy
X. Y. Fang et al.
MATERIALS CHARACTERIZATION (2018)
Identifying strain localization and dislocation processes in fatigued Inconel 718 manufactured from selective laser melting
Yung Suk Jeremy Yoo et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Grain boundary network evolution in Inconel 718 from selective laser melting to heat treatment
Sharniece Holland et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Comparison of microstructures and mechanical properties of Inconel 718 alloy processed by selective laser melting and casting
Dongyun Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Relating porosity to fatigue failure in additively manufactured alloy 718
Luke Sheridan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Laser powder bed fusion of Hastelloy X: Effects of hot isostatic pressing and the hot cracking mechanism
Quanquan Han et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Correlation of mechanical properties to microstructure in Metal Laser Sintering Inconel 718
Bryton Farber et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Influence of heat treatments on microstructure evolution and mechanical properties of Inconel 625 processed by laser powder bed fusion
Giulio Marchese et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Microstructure and mechanical properties of Inconel 718 produced by selective laser melting: Sample orientation dependence and effects of post heat treatments
Dunyong Deng et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Cold spray deposition for additive manufacturing of freeform structural components compared to selective laser melting
Sara Bagherifard et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Modelling of anisotropic elastic properties in alloy 718 built by electron beam melting
Chamara Kumara et al.
MATERIALS SCIENCE AND TECHNOLOGY (2018)
Electron beam melting of Inconel 718: effects of processing and post-processing
Peeyush Nandwana et al.
MATERIALS SCIENCE AND TECHNOLOGY (2018)
The Influence of Annealing Temperature and Time on the Formation of delta-Phase in Additively-Manufactured Inconel 625
M. R. Stoudt et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2018)
Correlation of Microstructure to Creep Response of Hot Isostatically Pressed and Aged Electron Beam Melted Inconel 718
Benjamin Shassere et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2018)
Additive manufacturing of 3D nano-architected metals
Andrey Vyatskikh et al.
NATURE COMMUNICATIONS (2018)
Surface tension-assisted additive manufacturing
Heloise Ragelle et al.
NATURE COMMUNICATIONS (2018)
Study of the Microstructure and Cracking Mechanisms of Hastelloy X Produced by Laser Powder Bed Fusion
Giulio Marchese et al.
MATERIALS (2018)
The Effect of Post-Processes on the Microstructure and Creep Properties of Alloy718 Built Up by Selective Laser Melting
Yen-Ling Kuo et al.
MATERIALS (2018)
Inconel 625 lattice structures manufactured by selective laser melting (SLM): Mechanical properties, deformation and failure modes
Martin Leary et al.
MATERIALS & DESIGN (2018)
The effect of laser focus shift on microstructural variation of Inconel 718 produced by selective laser melting
Tait D. McLouth et al.
MATERIALS & DESIGN (2018)
The printability, microstructure, crystallographic features and microhardness of selective laser melted Inconel 718 thin wall
Huihui Yang et al.
MATERIALS & DESIGN (2018)
Solution Treatment Study of Inconel 718 Produced by SLM Additive Technique in View of the Oxidation Resistance
Michele Calandri et al.
ADVANCED ENGINEERING MATERIALS (2018)
Effect of manufacturing parameters on the microstructure and mechanical properties of metal laser sintering parts of precipitate hardenable metals
Ala'aldin Alafaghani et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Defect analysis and fatigue design basis for Ni-based superalloy 718 manufactured by selective laser melting
Yoichi Yamashita et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
Influence of defects and as-built surface roughness on fatigue properties of additively manufactured Alloy 718
Arun Ramanathan Balachandramurthi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Effects of Selective Laser Melting additive manufacturing parameters of Inconel 718 on porosity, microstructure and mechanical properties
K. Moussaoui et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Process-Defect-Structure-Property Correlations During Laser Powder Bed Fusion of Alloy 718: Role of In Situ and Ex Situ Characterizations
S. J. Foster et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2018)
On the Tensile Properties of Inconel 718 Fabricated by EBM for As-Built and Heat-Treated Components
Laith Abdullah Al-Juboori et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2018)
COMPARISON OF FATIGUE PROPERTIES FOR ALLOY EP708 SPECIMENS PREPARED BY SELECTIVE LASER MELTING AND HOT ROLLING
M. G. Khomutov et al.
METALLURGIST (2018)
Anisotropy of nickel-based superalloy K418 fabricated by selective laser melting
Zhen Chen et al.
PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2018)
On the formation of microstructural gradients in a nickel-base superalloy during electron beam melting
Dunyong Deng et al.
MATERIALS & DESIGN (2018)
Effects of heat treatment on microstructure and creep properties of a laser powder bed fused nickel superalloy
S. J. Davies et al.
MATERIALS & DESIGN (2018)
Microstructure, mechanical properties and cracking behaviour in gamma '-precipitation strengthened nickel-base superalloy fabricated by electron beam melting
H. Peng et al.
MATERIALS & DESIGN (2018)
Influence of successive thermal cycling on microstructure evolution of EBM-manufactured alloy 718 in track-by-track and layer-by-layer design
Paria Karimi et al.
MATERIALS & DESIGN (2018)
Determination of Anisotropic Mechanical Properties for Materials Processed by Laser Powder Bed Fusion
Even W. Hovig et al.
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2018)
Superior Mechanical Behavior and Fretting Wear Resistance of 3D-Printed Inconel 625 Superalloy
Yong Gao et al.
APPLIED SCIENCES-BASEL (2018)
Microstructural and Microhardness Evolution from Homogenization and Hot Isostatic Pressing on Selective Laser Melted Inconel 718: Structure, Texture, and Phases
Raiyan Seede et al.
JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING (2018)
Thermofluid field of molten pool and its effects during selective laser melting (SLM) of Inconel 718 alloy
Dongyun Zhang et al.
ADDITIVE MANUFACTURING (2018)
Fatigue Behaviour of Additively Manufactured Inconel 718 Produced by Selective Laser Melting.
K. Solberg et al.
ECF22 - LOADING AND ENVIRONMENTAL EFFECTS ON STRUCTURAL INTEGRITY (2018)
Influence of powder characteristics and additive manufacturing process parameters on the microstructure and mechanical behaviour of Inconel 625 fabricated by Selective Laser Melting
Christopher Pleass et al.
ADDITIVE MANUFACTURING (2018)
Spatter and oxide formation in laser powder bed fusion of Inconel 718
A. N. D. Gasper et al.
ADDITIVE MANUFACTURING (2018)
Electron beam additive manufacturing of Inconel 718 alloy rods: Impact of build direction on microstructure and high-temperature tensile properties
Shi-Hai Sun et al.
ADDITIVE MANUFACTURING (2018)
Impact of Powder Variability on the Microstructure and Mechanical Behavior of Selective Laser Melted Alloy 718
Chantal K. Sudbrack et al.
PROCEEDINGS OF THE 9TH INTERNATIONAL SYMPOSIUM ON SUPERALLOY 718 & DERIVATIVES: ENERGY, AEROSPACE, AND INDUSTRIAL APPLICATIONS (2018)
Effect of heat treatment variations on the mechanical properties of Inconel 718 selective laser melted specimens
Judy Schneider et al.
ADDITIVE MANUFACTURING (2018)
Role of heat treatment and build orientation in the microstructure sensitive deformation characteristics of IN718 produced via SLM additive manufacturing
Michael D. Sangid et al.
ADDITIVE MANUFACTURING (2018)
Microstructure and performance evolution and underlying thermal mechanisms of Ni-based parts fabricated by selective laser melting
Dongdong Gu et al.
ADDITIVE MANUFACTURING (2018)
Effect of laser focus shift on surface quality and density of Inconel 718 parts produced via selective laser melting
Glenn E. Bean et al.
ADDITIVE MANUFACTURING (2018)
Selective Laser Melting of Graphene-Reinforced Inconel 718 Superalloy: Evaluation of Microstructure and Tensile Performance
Yachao Wang et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2017)
Effect of different heat treatments on the microstructure and mechanical properties in selective laser melted INCONEL 718 alloy
S. Raghavan et al.
MATERIALS AND MANUFACTURING PROCESSES (2017)
Review on powder-bed laser additive manufacturing of Inconel 718 parts
Xiaoqing Wang et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2017)
Laser powder-bed fusion of Inconel 718 to manufacture turbine blades
Fabrizia Caiazzo et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Effect of anisotropy and texture on the low cycle fatigue behavior of Inconel 718 processed via electron beam melting
M. M. Kirka et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Additive manufacturing of fatigue resistant materials: Challenges and opportunities
Aref Yadollahi et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Laser powder bed fusion of nickel alloy 625: Experimental investigations of effects of process parameters on melt pool size and shape with spatter analysis
Luis E. Criales et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2017)
Porosity evolution and its thermodynamic mechanism of randomly packed powder-bed during selective laser melting of Inconel 718 alloy
Mujian Xia et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2017)
Laser powder bed fusion of Ti-6Al-4V parts: Thermal modeling and mechanical implications
Mohammad Masoomi et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2017)
Strategy for Texture Management in Metals Additive Manufacturing
M. M. Kirka et al.
JOM (2017)
Microstructure of nickel-base superalloy MAR-M247 additively manufactured through scanning laser epitaxy (SLE)
Amrita Basak et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Interfacial phenomena and characteristics between the deposited material and substrate in selective laser melting Inconel 625
C. Li et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
Nickel-based superalloy microstructure obtained by pulsed laser powder bed fusion
Y. Tian et al.
MATERIALS CHARACTERIZATION (2017)
Fatigue crack growth rate and tensile strength of Re modified Inconel 718 produced by means of selective laser melting
Tomasz Brynk et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Anisotropic tensile behavior of in situ precipitation strengthened Inconel 718 fabricated by additive manufacturing
Mang Ni et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Microstructure and anisotropic manufactured Inconel 718 and effects of post heat treatments
Dunyong Deng et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Microstructure and hardness studies of Inconel 718 manufactured by selective laser melting before and after solution heat treatment
Wakshum M. Tucho et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Elevated temperature mechanical behavior of IN625 alloy processed by laser powder-bed fusion
Alena Kreitcberg et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Mechanical behavior of post-processed Inconel 718 manufactured through the electron beam melting process
Michael M. Kirka et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Effect of heat treatment and hot isostatic pressing on the microstructure and mechanical properties of Inconel 625 alloy processed by laser powder bed fusion
Alena Kreitcberg et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Process defects and in situ monitoring methods in metal powder bed fusion: a review
Marco Grasso et al.
MEASUREMENT SCIENCE AND TECHNOLOGY (2017)
Formation of the Ni3Nb δ-Phase in Stress-Relieved Inconel 625 Produced via Laser Powder-Bed Fusion Additive Manufacturing
Eric A. Lass et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2017)
Selective laser melting of aluminum alloys
Nesma T. Aboulkhair et al.
MRS BULLETIN (2017)
Densification and microstructural investigation of Inconel 718 parts fabricated by selective laser melting
Joon-Phil Choi et al.
POWDER TECHNOLOGY (2017)
Selective laser melting of nickel powder
Chor Yen Yap et al.
RAPID PROTOTYPING JOURNAL (2017)
The microstructure and mechanical properties of deposited-IN625 by laser additive manufacturing
Lanlan Qin et al.
RAPID PROTOTYPING JOURNAL (2017)
Optimisation of selective laser melting parameters for the Ni-based superalloy IN-738 LC using Doehlert's design
Nataliya Perevoshchikova et al.
RAPID PROTOTYPING JOURNAL (2017)
Anisotropy of mechanical properties of products manufactured using selective laser melting of powdered materials
A. A. Popovich et al.
RUSSIAN JOURNAL OF NON-FERROUS METALS (2017)
Additive manufacturing of metals: a brief review of the characteristic microstructures and properties of steels, Ti-6Al-4V and high-entropy alloys
Stephane Gorsse et al.
SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS (2017)
Effects of build direction and heat treatment on creep properties of Ni-base superalloy built up by additive manufacturing
Yen-Ling Kuo et al.
SCRIPTA MATERIALIA (2017)
Microstructure and phase transformation on the surface of Inconel 718 alloys fabricated by SLM under 1050°C solid solution plus double ageing
Ke-yun Feng et al.
VACUUM (2017)
Influence of Powder Surface Contamination in the Ni-Based Superalloy Alloy718 Fabricated by Selective Laser Melting and Hot Isostatic Pressing
Yen-Ling Kuo et al.
METALS (2017)
Structure, Texture and Phases in 3D Printed IN718 Alloy Subjected to Homogenization and HIP Treatments
Ahmad Mostafa et al.
METALS (2017)
Neutron residual stress measurement and numerical modeling in a curved thin-walled structure by laser powder bed fusion additive manufacturing
Ke An et al.
MATERIALS & DESIGN (2017)
The effect of interdendritic δ phase on the mechanical properties of Alloy 718 built up by additive manufacturing
Yen-Ling Kuo et al.
MATERIALS & DESIGN (2017)
Staged thermomechanical testing of nickel superalloys produced by selective laser melting
Zhengkai Xu et al.
MATERIALS & DESIGN (2017)
Functionally graded Inconel 718 processed by additive manufacturing: Crystallographic texture, anisotropy of microstructure and mechanical properties
V. A. Popovich et al.
MATERIALS & DESIGN (2017)
Laves phase control of Inconel 718 alloy using quasi-continuous-wave laser additive manufacturing
Hui Xiao et al.
MATERIALS & DESIGN (2017)
Impact of heat treatment on mechanical behaviour of Inconel 718 processed with tailored microstructure by selective laser melting
V. A. Popovich et al.
MATERIALS & DESIGN (2017)
A Multiscale Understanding of the Thermodynamic and Kinetic Mechanisms of Laser Additive Manufacturing
Dongdong Gu et al.
ENGINEERING (2017)
Characteristics of Inconel Powders for Powder-Bed Additive Manufacturing
Quy Bau Nguyen et al.
ENGINEERING (2017)
Thermo-mechanical improvement of Inconel 718 using ex situ boron nitride-reinforced composites processed by laser powder bed fusion
Sang Hoon Kim et al.
SCIENTIFIC REPORTS (2017)
Evolution of structure and properties of the nickel-based alloy EP718 after the SLM growth and after different types of heat and mechanical treatment
D. Ivanov et al.
ADDITIVE MANUFACTURING (2017)
Feasibility of in situ controlled heat treatment (ISHT) of Inconel 718 during electron beam melting additive manufacturing
W. J. Sames et al.
ADDITIVE MANUFACTURING (2017)
Effects of heat treatment on microstructures and tensile properties of IN718/TiC nanocomposite fabricated by selective laser melting
Xiling Yao et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2017)
Influences of processing parameters on surface roughness of Hastelloy X produced by selective laser melting
Yang Tian et al.
ADDITIVE MANUFACTURING (2017)
The effect of layer thickness at selective laser melting
V. S. Sufiiarov et al.
13TH GLOBAL CONGRESS ON MANUFACTURING AND MANAGEMENT (2017)
Powder characterisation techniques and effects of powder characteristics on part properties in powder-bed fusion processes
Austin T. Sutton et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2017)
Hot isostatic pressing of IN718 components manufactured by selective laser melting
W. Tillmann et al.
ADDITIVE MANUFACTURING (2017)
An overview of powder granulometry on feedstock and part performance in the selective laser melting process
Jun Hao Tan et al.
ADDITIVE MANUFACTURING (2017)
Effect of minor alloying elements on crack-formation characteristics of Hastelloy-X manufactured by selective laser melting
Dacian Tomus et al.
ADDITIVE MANUFACTURING (2017)
Microstructure and physical properties of a Ni/Fe-based superalloy processed by Selective Laser Melting
Alexey Domashenkov et al.
ADDITIVE MANUFACTURING (2017)
Fractal scan strategies for selective laser melting of 'unweldable' nickel superalloys
S. Catchpole-Smith et al.
ADDITIVE MANUFACTURING (2017)
Microstructure and yield strength of SLM-fabricated CM247LC Ni-Superalloy
Xiqian Wang et al.
ACTA MATERIALIA (2017)
Prediction of microstructure in laser powder bed fusion process
Ranadip Acharya et al.
ACTA MATERIALIA (2017)
Mechanical properties of additive manufactured nickel alloy 625
Harvey Hack et al.
ADDITIVE MANUFACTURING (2017)
Materials for additive manufacturing
David Bourell et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2017)
Selective Laser Melting of Titanium Alloys and Titanium Matrix Composites for Biomedical Applications: A Review
Lai-Chang Zhang et al.
ADVANCED ENGINEERING MATERIALS (2016)
Laser and electron-beam powder-bed additive manufacturing of metallic implants: A review on processes, materials and designs
Swee Leong Sing et al.
JOURNAL OF ORTHOPAEDIC RESEARCH (2016)
Recyclability Study on Inconel 718 and Ti-6Al-4V Powders for Use in Electron Beam Melting
Peeyush Nandwana et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2016)
Selective laser melting of Invar 36: Microstructure and properties
Chunlei Qiu et al.
ACTA MATERIALIA (2016)
Additive manufacturing of metals
Dirk Herzog et al.
ACTA MATERIALIA (2016)
Numerical modeling of heat-transfer and the influence of process parameters on tailoring the grain morphology of IN718 in electron beam additive manufacturing
Narendran Raghavan et al.
ACTA MATERIALIA (2016)
Multiscale Modeling of Powder Bed-Based Additive Manufacturing
Matthias Markl et al.
ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 46 (2016)
Metal Additive Manufacturing: A Review of Mechanical Properties
John J. Lewandowski et al.
ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 46 (2016)
Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: A review
Xiaojian Wang et al.
BIOMATERIALS (2016)
Sensitivity analysis of material and process parameters in finite element modeling of selective laser melting of Inconel 625
Luis E. Criales et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Low cycle fatigue behavior of direct metal laser sintered Inconel alloy 718
Sean Gribbin et al.
INTERNATIONAL JOURNAL OF FATIGUE (2016)
Long fatigue crack growth in Inconel 718 produced by selective laser melting
R. Konecna et al.
INTERNATIONAL JOURNAL OF FATIGUE (2016)
Influence of hatch spacing on heat and mass transfer, thermodynamics and laser processability during additive manufacturing of Inconel 718 alloy
Mujian Xia et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2016)
Hybrid additive and subtractive machine tools - Research and industrial developments
Joseph M. Flynn et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2016)
Additive manufacturing of metallic components by selective electron beam melting - a review
C. Koerner
INTERNATIONAL MATERIALS REVIEWS (2016)
Formation of novel graded interface and its function on mechanical properties of WC1-x reinforced Inconel 718 composites processed by selective laser melting
Ting Rong et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Interlaboratory Study for Nickel Alloy 625 Made by Laser Powder Bed Fusion to Quantify Mechanical Property Variability
Christopher U. Brown et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2016)
Processability of different IN738LC powder batches by selective laser melting
Roman Engeli et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)
Sintering phenomena and mechanical strength of nickel based materials in direct metal laser sintering process-a molecular dynamics study
Yi Zhang et al.
JOURNAL OF MATERIALS RESEARCH (2016)
Microstructure of selective laser melted CM247LC nickel-based superalloy and its evolution through heat treatment
V. D. Divya et al.
MATERIALS CHARACTERIZATION (2016)
Microstructure and mechanical behavior of direct metal laser sintered Inconel alloy 718
Derek H. Smith et al.
MATERIALS CHARACTERIZATION (2016)
Microstructure and mechanical properties of selective laser melted Inconel 718 compared to forging and casting
Tanja Trosch et al.
MATERIALS LETTERS (2016)
Superior creep strength of a nickel-based superalloy produced by selective laser melting
M. Proebstle et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
On the microstructural and mechanical properties of post-treated additively manufactured Inconel 718 superalloy under quasi-static and cyclic loading
M. E. Aydinoez et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Effect of heat treatment on the microstructure, texture and elastic anisotropy of the nickel-based superalloy CM247LC processed by selective laser melting
R. Munoz-Moreno et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Grain structure evolution in Inconel 718 during selective electron beam melting
H. Helmer et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Tailoring the texture of IN738LC processed by selective laser melting (SLM) by specific scanning strategies
Fabian Geiger et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Dynamic recrystallization mechanisms and twining evolution during hot deformation of Inconel 718
M. Azarbarmas et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Effect of anisotropic microstructure of a 12Cr-ODS steel on the fracture behaviour in the small punch test
E. Altstadt et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Microstructural characteristics of the nickel-based alloy IN738LC and the cobalt-based alloy Mar-M509 produced by selective laser melting
Michael Cloots et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Influence of post heat treatments on anisotropy of mechanical behaviour and microstructure of Hastelloy-X parts produced by selective laser melting
Dacian Tomus et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Additive Manufacturing of Single-Crystal Superalloy CMSX-4 Through Scanning Laser Epitaxy: Computational Modeling, Experimental Process Development, and Process Parameter Optimization
Amrita Basak et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2016)
Empirical Approach to Understanding the Fatigue Behavior of Metals Made Using Additive Manufacturing
David B. Witkin et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2016)
Additive manufacturing and postprocessing of Ti-6Al-4V for superior mechanical properties
M. Qian et al.
MRS BULLETIN (2016)
Microhardness and microstructure evolution of TiB2 reinforced Inconel 625/TiB2 composite produced by selective laser melting
Baicheng Zhang et al.
OPTICS AND LASER TECHNOLOGY (2016)
Effects of tailored gradient interface on wear properties of WC/Inconel 718 composites using selective laser melting
Ting Rong et al.
SURFACE & COATINGS TECHNOLOGY (2016)
A Lightweight Structure Redesign Method Based on Selective Laser Melting
Li Tang et al.
METALS (2016)
Microstructural characteristics and mechanical properties of carbon nanotube reinforced Inconel 625 parts fabricated by selective laser melting
Pei Wang et al.
MATERIALS & DESIGN (2016)
Fatigue behavior of IN718 microtrusses produced via additive manufacturing
Lena Huynh et al.
MATERIALS & DESIGN (2016)
Investigations on the microstructure and crack formation of IN738LC samples processed by selective laser melting using Gaussian and doughnut profiles
Michael Cloots et al.
MATERIALS & DESIGN (2016)
Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing
Sarah K. Everton et al.
MATERIALS & DESIGN (2016)
COMPARATIVE ANALYSIS OF PROPERTIES AND MICROSTRUCTURE OF THE PLASTICALLY DEFORMED ALLOY INCONEL®718, MANUFACTURED BY PLASTIC WORKING AND DIRECT METAL LASER SINTERING
K. Zaba et al.
ARCHIVES OF METALLURGY AND MATERIALS (2016)
Microstructure and directional fatigue behavior of Inconel 718 produced by selective laser melting
Radomila Konecna et al.
21ST EUROPEAN CONFERENCE ON FRACTURE, (ECF21) (2016)
Modeling of heat transfer, fluid flow and solidification microstructure of nickel-base superalloy fabricated by laser powder bed fusion
Y. S. Lee et al.
ADDITIVE MANUFACTURING (2016)
Phase-field modeling of microstructure formation during rapid solidification in Inconel 718 superalloy
Julia Kundin et al.
ACTA MATERIALIA (2015)
Reduction of micro-cracking in nickel superalloys processed by Selective Laser Melting: A fundamental alloy design approach
Neil J. Harrison et al.
ACTA MATERIALIA (2015)
Mechanical and Microstructural Investigation of Nickel-Based Superalloy IN718 Manufactured by Selective Laser Melting (SLM)
Johannes Stroessner et al.
ADVANCED ENGINEERING MATERIALS (2015)
Bending fatigue life characterisation of direct metal laser sintering nickel alloy 718
O. Scott-Emuakpor et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2015)
Microstructure Characteristics of Inconel 625 Superalloy Manufactured by Selective Laser Melting
Shuai Li et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2015)
XCT analysis of the influence of melt strategies on defect population in Ti-6Al-4V components manufactured by Selective Electron Beam Melting
S. Tammas-Williams et al.
MATERIALS CHARACTERIZATION (2015)
Effect of standard heat treatment on the microstructure and mechanical properties of selective laser melting manufactured Inconel 718 superalloy
Dongyun Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Additive manufacturing of a high niobium-containing titanium aluminide alloy by selective electron beam melting
H. P. Tang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Effect of heat treatment on the microstructure and mechanical properties of Inconel 718 processed by selective laser melting
E. Chlebus et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Texture, anisotropy in microstructure and mechanical properties of IN738LC alloy processed by selective laser melting (SLM)
Karsten Kunze et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Comparison of Residual Stresses in Inconel 718 Simple Parts Made by Electron Beam Melting and Direct Laser Metal Sintering
L. M. Sochalski-Kolbus et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2015)
Materials considerations for aerospace applications
R. R. Boyer et al.
MRS BULLETIN (2015)
Study on the microstructure, mechanical property and residual stress of SLM Inconel-718 alloy manufactured by differing island scanning strategy
Yanjin Lu et al.
OPTICS AND LASER TECHNOLOGY (2015)
The use of high-entropy alloys in additive manufacturing
Yevgeni Brif et al.
SCRIPTA MATERIALIA (2015)
Computational modeling of residual stress formation during the electron beam melting process for Inconel 718
P. Prabhakar et al.
ADDITIVE MANUFACTURING (2015)
Differences in microstructure and properties between selective laser melting and traditional manufacturing for fabrication of metal parts: A review
Bo Song et al.
FRONTIERS OF MECHANICAL ENGINEERING (2015)
The influence of the laser scan strategy on grain structure and cracking behaviour in SLM powder-bed fabricated nickel superalloy
Luke N. Carter et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
Selective laser melting additive manufacturing of Inconel 718 superalloy parts: Densification, microstructure and properties
Qingbo Jia et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
Effect of weld cooling rate on Laves phase formation in Inconel 718 fusion zone
S. G. K. Manikandan et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2014)
Thermal effects on microstructural heterogeneity of Inconel 718 materials fabricated by electron beam melting
William J. Sames et al.
JOURNAL OF MATERIALS RESEARCH (2014)
Microstructure and tensile properties of superalloy IN100 fabricated by micro-laser aided additive manufacturing
Guijun Bi et al.
MATERIALS & DESIGN (2014)
Properties of Inconel 625 mesh structures grown by electron beam additive manufacturing
F. A. List et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Selective laser melting additive manufactured Inconel 718 superalloy parts: High-temperature oxidation property and its mechanisms
Qingbo Jia et al.
OPTICS AND LASER TECHNOLOGY (2014)
STATE-OF-THE-ART REVIEW ON SELECTIVE LASER MELTING OF NON-FERROUS METALS
C. Y. Yap et al.
PROCEEDINGS OF THE 1ST INTERNATIONAL CONFERENCE ON PROGRESS IN ADDITIVE MANUFACTURING (2014)
Effect of IN718 recycled powder reuse on properties of parts manufactured by means of Selective Laser Melting
L. C. Ardila et al.
8TH INTERNATIONAL CONFERENCE ON LASER ASSISTED NET SHAPE ENGINEERING (LANE 2014) (2014)
Microstructures of Rene 142 nickel-based superalloy fabricated by electron beam melting
L. E. Murr et al.
ACTA MATERIALIA (2013)
Additive manufacturing and its societal impact: a literature review
Samuel H. Huang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
Structural integrity of direct metal laser sintered parts subjected to thermal and finishing treatments
C. Sanz et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2013)
Inconel 939 processed by selective laser melting: Effect of microstructure and temperature on the mechanical properties under static and cyclic loading
P. Kanagarajah et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Parametric optimization of selective laser melting for forming Ti6Al4V samples by Taguchi method
Jianfeng Sun et al.
OPTICS AND LASER TECHNOLOGY (2013)
High temperature material properties of IN738LC processed by selective laser melting (SLM) technology
L. Rickenbacher et al.
RAPID PROTOTYPING JOURNAL (2013)
Metal additive manufacturing of a high-pressure micro-pump
Wessel W. Wits et al.
FORTY SIXTH CIRP CONFERENCE ON MANUFACTURING SYSTEMS 2013 (2013)
Additive manufacturing: technology, applications and research needs
Nannan Guo et al.
FRONTIERS OF MECHANICAL ENGINEERING (2013)
Fatigue cracking at twin boundaries: Effects of crystallographic orientation and stacking fault energy
Z. J. Zhang et al.
ACTA MATERIALIA (2012)
Microstructures and mechanical behavior of Inconel 718 fabricated by selective laser melting
K. N. Amato et al.
ACTA MATERIALIA (2012)
Mechanical property study on rapid additive layer manufacture Hastelloy® X alloy by selective laser melting technology
Fude Wang
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2012)
Laser additive manufacturing of metallic components: materials, processes and mechanisms
D. D. Gu et al.
INTERNATIONAL MATERIALS REVIEWS (2012)
The microstructure and mechanical properties of deposited-IN718 by selective laser melting
Zemin Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2012)
Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies
Lawrence E. Murr et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2012)
Microstructural and mechanical approaches of the selective laser melting process applied to a nickel-base superalloy
T. Vilaro et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Microstructure and mechanical properties of nickel based superalloy IN718 produced by rapid prototyping with electron beam melting (EBM)
A. Strondl et al.
MATERIALS SCIENCE AND TECHNOLOGY (2011)
Microstructural Architecture, Microstructures, and Mechanical Properties for a Nickel-Base Superalloy Fabricated by Electron Beam Melting
L. E. Murr et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2011)
Open-Cellular Co-Base and Ni-Base Superalloys Fabricated by Electron Beam Melting
Lawrence Murr et al.
MATERIALS (2011)
Manufacturing of fine-structured 3D porous filter elements by selective laser melting
I. Yadroitsev et al.
APPLIED SURFACE SCIENCE (2009)
Statistical evaluation of anisotropic fracture behavior of ODS ferritic steels by using small punch tests
Naoyuki Okuda et al.
JOURNAL OF NUCLEAR MATERIALS (2009)
Strategy of manufacturing components with designed internal structure by selective laser melting of metallic powder
I. Yadroitsev et al.
APPLIED SURFACE SCIENCE (2007)
Nickel-based superalloys for advanced turbine engines: Chemistry, microstructure, and properties
TM Pollock et al.
JOURNAL OF PROPULSION AND POWER (2006)
Sequential laser and EDM micro-drilling for next generation fuel injection nozzle manufacture
Lin Li et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2006)
Use of Taguchi methods and multiple regression analysis for optimal process development of high energy electron beam case hardening of castiron
MD Jean et al.
SURFACE ENGINEERING (2003)
An overview of the machinability of aeroengine alloys
EO Ezugwu et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)
Development and application of nickel alloys in aerospace engineering
RJ Smith et al.
AIRCRAFT ENGINEERING AND AEROSPACE TECHNOLOGY (2001)
Share Paper
