Related references
Note: Only part of the references are listed.New modified Nafion-bisphosphonic acid composite membranes for enhanced proton conductivity and PEMFC performance
Fatima C. Teixeira et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)
Electrochemical and characterisation study of corrosion of reinforcing steel embedded in kaolinite: two-year exposure study (Publication with Expression of Concern. See JAN, 2023)
Miloud Baghdad et al.
CORROSION ENGINEERING SCIENCE AND TECHNOLOGY (2021)
Low-temperature carburized high-alloyed austenitic stainless steels in PEMFC cathodic environment
Giulio Maistro et al.
SURFACES AND INTERFACES (2021)
Bipolar plate design and fabrication using graphite reinforced composite laminate for proton exchange membrane fuel cells
Yean-Der Kuan et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)
Corrosion resistance and electrical conductivity of plasma nitrided titanium
Hongyu Shen et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)
Development and evaluation of nitride coated titanium bipolar plates for PEM fuel cells
Jun Bi et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)
Modeling, design, materials and fabrication of bipolar plates for proton exchange membrane fuel cell: A review
Kangning Xiong et al.
APPLIED ENERGY (2021)
Influences of plastic strain and strain rate on corrosion behavior of 316L stainless steel in simulated cathodic environment of proton exchange membrane fuel cell
D. G. Li et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)
Carbon corrosion mechanism and mitigation strategies in a proton exchange membrane fuel cell (PEMFC): A review
Junjie Zhao et al.
JOURNAL OF POWER SOURCES (2021)
Evaluation of vacuum heat-treated α-C films for surface protection of metal bipolar plates used in polymer electrolyte membrane fuel cells
Wei Li et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)
Influence of temperature on corrosion behavior, wettability, and surface conductivity of 304 stainless steel in simulated cathode environment of proton exchange membrane fuel cells
Junji Xuan et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)
Influence of oxygen content on the corrosion behaviour of 316 L stainless steel in the simulated cathodic environment of proton exchange membrane fuel cell
D. G. Li et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
Enhancing corrosion resistance, hardness, and crack resistance in magnetron sputtered high entropy CoCrFeMnNi coatings by adding carbon
Leon Zendejas Medina et al.
MATERIALS & DESIGN (2021)
Numerical simulation study on operation characteristics of PEMFC in low temperature environment
Penghui Yang et al.
JOURNAL OF RENEWABLE AND SUSTAINABLE ENERGY (2021)
The effects of driving patterns and PEM fuel cell degradation on the lifecycle assessment of hydrogen fuel cell vehicles
Pouria Ahmadi et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)
Improved polymer electrolyte fuel cell performance with membrane electrode assemblies using modified metallic plate: Comparative study on impact of various coatings
Harshal Agarwal et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)
A reactive-sputter-deposited TiSiN nanocomposite coating for the protection of metallic bipolar plates in proton exchange membrane fuel cells
Shuang Peng et al.
CERAMICS INTERNATIONAL (2020)
Review on current research of materials, fabrication and application for bipolar plate in proton exchange membrane fuel cell
Yuxi Song et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)
Fabrication and characterization of novel p-Phenylamine-N(4-chloro salicylaldenemine) ligand and its metal complexes and evaluation their anti-corrosion and chemical resistance properties in epoxy/SiO2 nanocomposite for steel surface coating
A. M. Fadl et al.
CHEMICAL ENGINEERING JOURNAL (2020)
Mathematical model for iron corrosion that eliminates chemical potential parameters
Hadi Seddiqi et al.
CHINESE JOURNAL OF CHEMICAL ENGINEERING (2020)
Corrosion behaviour of 13Cr stainless steel under stress and crevice in 3.5 wt.% NaCl solution
Y. Z. Li et al.
CORROSION SCIENCE (2020)
Effect of nitrogen-doping on the surface chemistry and corrosion stability of TiO2 films
Edvan Almeida de Souza Filho et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Refill friction stir spot welded AA5754-H22/Ti-6Al-4V joints: Microstructural characterization and electrochemical corrosion behavior of aluminum surfaces
G. S. Vacchi et al.
MATERIALS TODAY COMMUNICATIONS (2020)
Active protection of Mg alloy by composite PEO coating loaded with corrosion inhibitors
Yan Chen et al.
APPLIED SURFACE SCIENCE (2020)
Strongly adherent Al2O3 coating on SS 316L: Optimization of plasma spray parameters and investigation of unique wear resistance behaviour under air and nitrogen environment
Vandana Chaturvedi Misra et al.
CERAMICS INTERNATIONAL (2020)
Superior conducting polypyrrole anti-corrosion coating containing functionalized carbon powders for 304 stainless steel bipolar plates in proton exchange membrane fuel cells
Zhihao Chen et al.
CHEMICAL ENGINEERING JOURNAL (2020)
Comparative study on corrosion behaviour of rusted X100 steel in dry/wet cycle and immersion environments
Ke Gong et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Electrochemical studies of steel rebar corrosion in clay: Application to a raw earth concrete
Joanna Eid et al.
CORROSION SCIENCE (2020)
Corrosion of 304 stainless steel in carbonates melt- a state of enhanced dissolution of corrosion products
Santosh Prasad Sah
CORROSION SCIENCE (2020)
Computational analysis of the impact of a micro porous layer (MPL) on the characteristics of a high temperature PEMFC
Fereshteh Salimi Nanadegani et al.
ELECTROCHIMICA ACTA (2020)
Thermo-economic modeling and analysis of an NG-fueled SOFC-WGS-TSA-PEMFC hybrid energy conversion system for stationary electricity power generation
Zhen Wu et al.
ENERGY (2020)
Adaptive robust control of oxygen excess ratio for PEMFC system based on type-2 fuzzy logic system
H. K. Zhang et al.
INFORMATION SCIENCES (2020)
Planar membrane humidifier for fuel cell application: Numerical and experimental case study
V. Kord Firouzjaei et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)
A systematic approach for matching simulated and experimental polarization curves for a PEM fuel cell
Muhammad Arif et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)
Clean energy production by PEM fuel cells on tourist ships: A time-dependent analysis
M. Rivarolo et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)
Corrosion resistant quaternary Al-Cr-Mo-N coating on type 316L stainless steel bipolar plates for proton exchange membrane fuel cells
Avinash V. Ingle et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)
Corrosion behavior of tantalum coatings on AISI 316L stainless steel substrate for bipolar plates of PEM fuel cells
A. P. Manso et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)
Solid oxide fuel cell: Materials for anode, cathode and electrolyte
Sudhanshu Dwivedi
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)
Transient stainless-steel dissolution and its consequences on ex-situ bipolar plate testing procedures
Xuejie Li et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)
Experimental and modelling studies of low temperature PEMFC performance
Sachin Chugh et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)
Thin film metallic glasses: Properties, applications and future
Pakman Yiu et al.
JOURNAL OF APPLIED PHYSICS (2020)
Glass formation, production and superior properties of Zr-based thin film metallic glasses (TFMGs): A status review
Satiye Korkmaz et al.
JOURNAL OF NON-CRYSTALLINE SOLIDS (2020)
Stainless steel bipolar plates for proton exchange membrane fuel cells: Materials, flow channel design and forming processes
Yu Leng et al.
JOURNAL OF POWER SOURCES (2020)
Carbon electro-catalysis in the direct carbon fuel cell utilising alkali metal molten carbonates: A mechanistic review
Michael J. Glenn et al.
JOURNAL OF POWER SOURCES (2020)
Structural monitoring system for proactive detection of corrosion and coating failure
Jawwad Latif et al.
SENSORS AND ACTUATORS A-PHYSICAL (2020)
Laser surface modifications of Fe-14Cr ferritic alloy for improved corrosion performance
Ali Hemmasian Ettefagh et al.
SURFACE & COATINGS TECHNOLOGY (2020)
Performance of photocatalytic cathodic protection of 20 steel by α-Fe2O3/TiO2 system
Jinbo Xue et al.
SURFACE & COATINGS TECHNOLOGY (2020)
Wear and corrosion resistance enhancement of chromium surfaces through graphene oxide coating
Dogus Ozkan et al.
SURFACE & COATINGS TECHNOLOGY (2020)
Zr-Based Thin-Film Metallic Glass for Bipolar Plate in Proton Exchange Membrane Fuel Cells
Hae Won Yoon et al.
ADVANCED ENGINEERING MATERIALS (2020)
Stainless steel bipolar plate coated with polyaniline/Zn-Porphyrin composites coatings for proton exchange membrane fuel cell
M. A. Deyab et al.
SCIENTIFIC REPORTS (2020)
Determination of impressed current efficiency during accelerated corrosion of reinforcement
Shuxian Hong et al.
CEMENT & CONCRETE COMPOSITES (2020)
Characterization of the corrosion profiles of reinforcement with different impressed current densities by X-ray micro-computed tomography
Shuxian Hong et al.
CEMENT & CONCRETE COMPOSITES (2020)
Study on the deterioration mechanism of cement-based materials in acid water containing aggressive carbon dioxide
Hao Bao et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Superior resistance to hydrogen damage for selective laser melted 316L stainless steel in a proton exchange membrane fuel cell environment
Decheng Kong et al.
CORROSION SCIENCE (2020)
Corrosion behaviour of nitrided ferritic stainless steels for use in solid oxide fuel cell devices
Manuel Bianco et al.
CORROSION SCIENCE (2020)
Corrosion Behavior of AISI 1045 Steel in Seawater in the Presence of Flavobacterium sp.
Jinyi Wu et al.
FRONTIERS IN MICROBIOLOGY (2020)
Modelling and control of vehicle integrated thermal management system of PEM fuel cell vehicle
Jiamin Xu et al.
ENERGY (2020)
Challenges and Perspectives of Metal-Based Proton Exchange Membrane's Bipolar Plates: Exploring Durability and Longevity
Tomer Stein et al.
ENERGY TECHNOLOGY (2020)
Effect of pH on the Passive Film Characteristics of Lean Duplex Stainless Steel in Chloride-Containing Synthetic Tap Water
Sangwon Cho et al.
INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE (2020)
Thermodynamic Analyses of a Phosphoric Acid Fuel Cell / Thermoelectric Generator Hybrid System with the Thomson Effect
Jing Zhang et al.
INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE (2020)
Corrosion characteristics and fuel cell performance of a cost-effective high Mn-Low Ni austenitic stainless steel as an alternative to SS 316L bipolar plate
Nitish Kumar et al.
INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2020)
Formation of a protective TiN layer by liquid phase plasma electrolytic nitridation on Ti-6Al-4V bipolar plates for PEMFC
Jie Jin et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)
Formable chromium nitride coatings for proton exchange membrane fuel cell stainless steel bipolar plates
Emile Haye et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)
Evaluation of the corrosion resistance of Ni(P)Cr coatings for bipolar plates by electrochemical impedance spectroscopy
F. F. Marzo et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)
Fabrication of multi-filler thermoset-based composite bipolar plates for PEMFCs applications: Molding defects and properties characterizations
Sepehr Simaafrookhteh et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)
Hydrophobic octadecylamine-functionalized graphene/TiO2 hybrid coating for corrosion protection of copper bipolar plates in simulated proton exchange membrane fuel cell environment
Zahra Sadeghian et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)
Electrodeposited Ni-Fe-Cr2O3 nanocomposite coatings: A survey of influences of Cr2O3 nanoparticles loadings in the electrolyte
Ali Rasooli et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Properties of a Plasma-Nitrided Coating and a CrNx Coating on the Stainless Steel Bipolar Plate of PEMFC
Meiling Xu et al.
COATINGS (2020)
Effect of Modified Hexagonal Boron Nitride Nanoparticles on the Emulsion Stability, Viscosity and Electrochemical Behavior of Nanostructured Acrylic Coatings for the Corrosion Protection of AISI 304 Stainless Steel
Alma P. Ysiwata-Rivera et al.
COATINGS (2020)
Effect of Cathode-Anode distance and electrical resistivity on macrocell corrosion currents and cathodic response in cases of chloride induced corrosion in reinforced concrete structures
Chantal Chalhoub et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Kinetic and thermodynamic analysis of high-temperature CO2 corrosion of carbon steel in simulated geothermal NaCl fluids
N. Mundhenk et al.
CORROSION SCIENCE (2020)
Effect of annealing temperature on microstructure, mechanical properties and corrosion behavior of Al-Mg-Mn-Sc-Zr alloy
Zhongqin Tang et al.
APPLIED SURFACE SCIENCE (2020)
A novel ammonia molten alkaline fuel cell based integrated powering system for clean rail transportation
K. H. M. Al-Hamed et al.
ENERGY (2020)
Mechanical degradation of proton exchange membrane during assembly and running processes in proton exchange membrane fuel cells with metallic bipolar plates
Wenqing Liu et al.
INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2020)
Thermal characteristics of anair-cooled open-cathodeproton exchange membrane fuel cell stack via numerical investigation
Calvin D'Souza et al.
INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2020)
Impact of pressure on carbon films by PECVD toward high deposition rates and high stability as metallic bipolar plate for PEMFCs
Ju Che et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)
Development of highly efficient methanol steam reforming system for hydrogen production and supply for a low temperature proton exchange membrane fuel cell
Yancheng Wang et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)
Active direct methanol fuel cell: An overview
M. S. Alias et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)
Effect of N+Implantation on Surface Characteristics of 316L Stainless Steels for Bipolar Plate in PEMFC
Yu-Sung Kim et al.
COATINGS (2020)
Assessment of fuel cell types for ships: Based on multi-criteria decision analysis
Omer Berkehan Inal et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Recent developments in catalyst -related PEM fuel cell durability
Rodney L. Borup et al.
CURRENT OPINION IN ELECTROCHEMISTRY (2020)
Experimental and numerical study on catalyst layer of polymer electrolyte membrane fuel cell prepared with diverse drying methods
Krishan Talukdar et al.
JOURNAL OF POWER SOURCES (2020)
Electrochemistry, past, present, and future: energy conversion, sensors, and beyond
Jose H. Zagal
JOURNAL OF SOLID STATE ELECTROCHEMISTRY (2020)
Corrosion protection coating of three-dimensional metal structure by electrophoretic deposition of graphene oxide
Seungwan Ryu et al.
MATERIALS CHEMISTRY AND PHYSICS (2020)
Corrosion characteristics of vanadium micro-alloyed steel reinforcement bars exposed in concrete environments and industrially polluted atmosphere
Raja Rizwan Hussain et al.
CEMENT & CONCRETE COMPOSITES (2020)
Growth of nanocrystalline β-Nb2N coating on 430 ferritic stainless steel bipolar plates of PEMFCs by disproportionation reaction of Nb(IV) ions in molten salt
Ling Xu Yang et al.
CORROSION SCIENCE (2020)
Hot corrosion behavior of electrodeposited SiO2 coating on TiAl alloy
Lian-Kui Wu et al.
CORROSION SCIENCE (2020)
Design and modeling of PEM fuel cell based on different flow fields
Mingzhang Pan et al.
ENERGY (2020)
Initial steps of corrosion and oxide characteristics
Carmen Andrade
STRUCTURAL CONCRETE (2020)
Investigation of incorporating oxygen into TiN coating to resist high potential effects on PEMFC bipolar plates in vehicle applications
Jie Jin et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)
Synthesis of Ag-Cr thin film metallic glasses with enhanced sulfide-resistance
Peng Jia et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)
Interface-induced degradation of amorphous carbon films/stainless steel bipolar plates in proton exchange membrane fuel cells
Hao Li et al.
JOURNAL OF POWER SOURCES (2020)
Degradation mechanisms of proton exchange membrane fuel cell under typical automotive operating conditions
Peng Ren et al.
PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2020)
Quantifying operating uncertainties of a PEMFC - Monte Carlo-machine learning based approach
Vishvak Kannan et al.
RENEWABLE ENERGY (2020)
Improved catalytic performance and corrosion resistance of selective laser melted 316L SS in a direct methanol fuel cell by surface anodization
Ruixue Li et al.
SURFACE & COATINGS TECHNOLOGY (2020)
Electrochemical behavior and surface conductivity of NbC modified Ti bipolar plate for proton exchange membrane fuel cell
Pengchao Zhang et al.
SURFACE & COATINGS TECHNOLOGY (2020)
An overview on corrosion of iron and steel components in reclaimed water supply systems and the mechanisms involved
Xiyan Xu et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Detection of corrosion on steel structures using automated image processing
M. Khayatazad et al.
DEVELOPMENTS IN THE BUILT ENVIRONMENT (2020)
An efficient terminal voltage control for PEMFC based on an improved version of whale optimization algorithm
Yan Cao et al.
ENERGY REPORTS (2020)
Influence of different carbon materials on electrical properties of epoxy-based composite for bipolar plate applications
Andres F. Rigail-Cedeno et al.
MATERIALS TODAY-PROCEEDINGS (2020)
Corrosion protection of steel elements in facade systems - A review
Leila Soufeiani et al.
JOURNAL OF BUILDING ENGINEERING (2020)
Highly filled graphite/graphene/carbon nanotube in polybenzoxazine composites for bipolar plate in PEMFC
Sirawit Witpathomwong et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)
Corrosion inhibition of methanol towards stainless steel bipolar plate for direct formic acid fuel cell
Haibang Zhang et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)
Catastrophe Theory Predicts International Concern for Global Warming
Mohamed M. Mostafa
JOURNAL OF QUANTITATIVE ECONOMICS (2020)
Electrochemical and Structural Property of TiSiNb TFSOC on Affordable Interconnects in Proton Exchange Membrane Fuel Cell Applications
Saman Khosravi H. et al.
NANOMATERIALS (2020)
Surface roughness profile and its effect on coating adhesion and corrosion protection: A review
S. G. Croll
PROGRESS IN ORGANIC COATINGS (2020)
Electrochemical Performance of Recycled Cathode Active Materials Using Froth Flotation-based Separation Process
Hosop Shin et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)
Studies on surface modification of polypropylene composite bipolar plates using an electroless deposition technique
Rungsima Yeetsorn et al.
RSC ADVANCES (2020)
Corrosion behaviour of thermally sprayed Mo added AlCoCrNi high entropy alloy coating
A. Vallimanalan et al.
MATERIALS TODAY-PROCEEDINGS (2020)
Mechanism analysis, anti-corrosion techniques and numerical modeling of corrosion in energy industry
Hua Bai
OIL & GAS SCIENCE AND TECHNOLOGY-REVUE D IFP ENERGIES NOUVELLES (2020)
Electropolymerization and corrosion resistance of polypyrrole on nickel bipolar plate for PEM fuel cell application
S. Ben Jadi et al.
MATERIALS TODAY-PROCEEDINGS (2020)
Carbon-based coatings for metallic bipolar plates used in proton exchange membrane fuel cells
Peiyun Yi et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)
Heat treatment effect on the microstructure and corrosion behavior of Al-6061 alloy with influence of α-nanoalumina reinforcement in 3.5% NaCl solution
Vikas Shrivastava et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Characterization of Highly Filled PP/Graphite Composites for Adhesive Joining in Fuel Cell Applications
Piotr Rzeczkowski et al.
POLYMERS (2019)
Effect of the alkyl chain of quaternary ammonium cationic surfactants on corrosion inhibition in hydrochloric acid solution
Minlan Gao et al.
COMPTES RENDUS CHIMIE (2019)
Performance of surface chromizing layer on 316L stainless steel for proton exchange membrane fuel cell bipolar plates
Zhihao Dong et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)
A review on the approaches applied for cooling fuel cells
Mandi Ramezanizadeh et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)
A comprehensive study of the effect of bipolar plate (BP) geometry design on the performance of proton exchange membrane (PEM) fuel cells
Tabbi Wilberforce et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2019)
Advances in proton exchange membrane fuel cell with dead-end anode operation: A review
Jundika C. Kurnia et al.
APPLIED ENERGY (2019)
Comparison of performance degradation of high temperature PEM fuel cells with different bipolar plates
Wei-Mon Yan et al.
ENERGY (2019)
Corrosion behavior and mechanism of Cr-Mo alloyed steel: Role of ferrite/bainite duplex microstructure
Dan Song et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Anti-corrosion and conductivity of the electrodeposited graphene/polypyrrole composite coating for metallic bipolar plates
S. Liu et al.
PROGRESS IN ORGANIC COATINGS (2019)
Technical evaluation of proton exchange membrane (PEM) fuel cell performance - A review of the effects of bipolar plates coating
Tabbi Wilberforce et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2019)
Molybdenum carbide coated 316L stainless steel for bipolar plates of proton exchange membrane fuel cells
Lun Wang et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)
Niobium doped amorphous carbon film on metallic bipolar plates for PEMFCs: First principle calculation, microstructure and performance
Kun Hou et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)
In-situ electrodeposition of conductive polypyrrole-graphene oxide composite coating for corrosion protection of 304SS bipolar plates
Li Jiang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Thin metallic wave-like channel bipolar plates for proton exchange membrane fuel cells: Deformation behavior, formability analysis and process design
Xia'nan Li et al.
JOURNAL OF POWER SOURCES (2019)
Investigation on physical and electrochemical properties of TiN-coated Monel alloy used for bipolar plates of proton exchange membrane fuel cell
Mohammad Matboo Ghorbani et al.
MATERIALS CHEMISTRY AND PHYSICS (2019)
CORROSION PROTECTION OF AMORPHOUS CARBON COATING FOR THE BIPOLAR PLATES OF PEMFCs
Gang Chen et al.
SURFACE REVIEW AND LETTERS (2019)
Fabrication, Corrosion, and Mechanical Properties of Magnetron Sputtered Cu-Zr-Al Metallic Glass Thin Film
Xianshun Wei et al.
MATERIALS (2019)
Datasets on the corrosion behaviour of nanostructured AISI 316 stainless steel treated by SMAT
Temitope Olugbade
DATA IN BRIEF (2019)
Proton exchange membrane (PEM) fuel cell bipolar plates prepared from a physical vapor deposition (PVD) titanium nitride (TiN) coated AISI416 stainless-steel
Tomer Stein et al.
SN APPLIED SCIENCES (2019)
Synthesis and characterization of epoxy/graphite/nano-copper nanocomposite for the fabrication of bipolar plate for PEMFCs
Mahdi Soleimani Alavijeh et al.
JOURNAL OF NANOSTRUCTURE IN CHEMISTRY (2019)
The Electrochemical Performance and Reaction Mechanism of Coated Titanium Anodes for Manganese Electrowinning
Shuliang Luo et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)
Degradation of iridium oxides via oxygen evolution from the lattice: correlating atomic scale structure with reaction mechanisms
Olga Kasian et al.
ENERGY & ENVIRONMENTAL SCIENCE (2019)
The effect of pulse-reverse electroplating bath temperature on the wear/corrosion response of Ni-Co/tungsten carbide nanocomposite coating during layer deposition
M. Sabzi et al.
CERAMICS INTERNATIONAL (2018)
Special issue on Recent advances in corrosion science: celebrating the 90th birthday of Professor Norio Sato
Masahiro Seo
CORROSION REVIEWS (2018)
Energy and exergy analyze of PEM fuel cell: A case study of modeling and simulations
Tolga Taner
ENERGY (2018)
Corrosion Behaviour of 316L Stainless Steel in Boric Acid Solutions
Shenghan Zhang et al.
INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE (2018)
Performance investigation of proton exchange membrane fuel cell with intersectant flow field
Wen Dong-hui et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)
Soldering a gas diffusion layer to a stainless steel bipolar plate using metallic tin
Katie McCay et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)
Non-active area water mitigation in PEM fuel cells via bipolar plate surface energy modification
Xuan Liu et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)
The effect of sol-gel boehmite coatings on the corrosion and decarburization of C45 steel
Ales Nagode et al.
JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY (2018)
Ultra-thin carbon/silicon carbide composite bipolar plate for advanced fuel cells
T. S. K. Raunija et al.
MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK (2018)
Formation of 3D graphene-Ni foam heterostructures with enhanced performance and durability for bipolar plates in a polymer electrolyte membrane fuel cell
Yeoseon Sim et al.
JOURNAL OF MATERIALS CHEMISTRY A (2018)
Preparation and performances of electrically conductive Nb-doped TiO2 coatings for 316 stainless steel bipolar plates of proton-exchange membrane fuel cells
Yanli Wang et al.
CORROSION SCIENCE (2018)
Strategy of alternating bias voltage on corrosion resistance and interfacial conductivity enhancement of TiCx/a-C coatings on metallic bipolar plates in PEMFCs
Weixin Zhang et al.
ENERGY (2018)
A Review of Corrosion Resistance Method on Stainless Steel Bipolar plate
Pramod Mandal et al.
MATERIALS TODAY-PROCEEDINGS (2018)
Fabrication of metallic bipolar plates in PEM fuel cell using semi-stamp rubber forming process
Majid Elyasi et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Corrosion Protection of 304 Stainless Steel Bipolar Plates of PEMFC by Coating SnO2 Film
Linghui Yang et al.
INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE (2017)
Graphene as corrosion protection for metal foam flow distributor in proton exchange membrane fuel cells
Yi-Husan Lee et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)
Two-stage forming approach for manufacturing ferritic stainless steel bipolar plates in PEM fuel cell: Experiments and, numerical simulations
Hyuk Jong Bong et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)
Coating of stainless steel and titanium bipolar plates for anticorrosion in PEMFC: A review
Nur Fawwaz Asri et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)
Durable graphene-coated bipolar plates for polymer electrolyte fuel cells
Yoon Ho Lee et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)
Electropolymerization of camphorsulfonic acid doped conductive polypyrrole anti-corrosive coating for 304SS bipolar plates
Li Jiang et al.
APPLIED SURFACE SCIENCE (2017)
Self-passivating carbon film as bipolar plate protective coating in polymer electrolyte membrane fuel cell
Zhiyuan Wang et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)
Investigation of bipolar plate materials for proton exchange membrane fuel cells
S. Shimpalee et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)
Materials for Bipolar Plates in Polymer Electrolyte Membrane Fuel Cell: Performance Criteria and Current Benchmarks
O. A. Alo et al.
INTERNATIONAL CONFERENCE ON SUSTAINABLE MATERIALS PROCESSING AND MANUFACTURING (SMPM 2017) (2016)
An Improved Empirical Fuel Cell Polarization Curve Model Based on Review Analysis
Dong Hao et al.
INTERNATIONAL JOURNAL OF CHEMICAL ENGINEERING (2016)
Low-nickel austenitic stainless steel as an alternative to 316L bipolar plate for proton exchange membrane fuel cells
Subash Rajasekar et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2015)
Effect of grain refinement and electrochemical nitridation on corrosion resistance of the 316L stainless steel for bipolar plates in PEMFCs environment
Lv Jinlong et al.
JOURNAL OF POWER SOURCES (2015)
Preparation of corrosion-resistant and conductive trivalent Cr-C coatings on 304 stainless steel for use as bipolar plates in proton exchange membrane fuel cells by electrodeposition
Hsiang-Cheng Wang et al.
JOURNAL OF POWER SOURCES (2015)
Electrochemical characteristics of fluorine-doped tin oxide film coated on stainless steel bipolar plates
Ji Hun Park et al.
SURFACE & COATINGS TECHNOLOGY (2015)
Carbon-polymer composite coatings for PEM fuel cell bipolar plates
Hans Husby et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2014)
Design and manufacturing of stainless steel bipolar plates for proton exchange membrane fuel cells
Linfa Peng et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2014)
Application of Carbon Coated Stainless Steel for Bipolar Plate in Proton Exchange Membrane Fuel Cell
H. Y. Hsieh et al.
POLYMER ELECTROLYTE FUEL CELLS 14 (2014)
In situ measurement of temperature distribution in proton exchange membrane fuel cell I a hydrogen-air stack
Houchang Pei et al.
JOURNAL OF POWER SOURCES (2013)
Protective graphite coating on metallic bipolar plates for PEMFC applications
Wen-Lin Wang et al.
ELECTROCHIMICA ACTA (2012)
Improvement of PEMFC performance with Nafion/inorganic nanocomposite membrane electrode assembly prepared by ultrasonic coating technique
Yilser Devrim et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2012)
Effect of pH value on corrosion resistance and surface conductivity of plasma-nitrided 304L bipolar plate for PEMFC
Rujin Tian et al.
INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2011)
The characteristics and performance of AISI 1045 steel bipolar plates with chromized coatings for proton exchange membrane fuel cells
Ching-Yuan Bai et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2011)
Corrosion characteristics of SS316L as bipolar plate material in PEMFC cathode environments with different acidities
Ying Yang et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2011)
Preparation of Cr-based multilayer coating on stainless steel as bipolar plate for PEMFCs by magnetron sputtering
Dongming Zhang et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2011)
Corrosion behavior of SS316L in simulated and accelerated PEMFC environments
Kai Feng et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2011)
A finite strain model of stress, diffusion, plastic flow, and electrochemical reactions in a lithium-ion half-cell
A. F. Bower et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2011)
Analytical modeling of PEM fuel cell i-V curve
Shaker Haji
RENEWABLE ENERGY (2011)
Nanostructured Pt-alloy electrocatalysts for PEM fuel cell oxygen reduction reaction
Yonghong Bing et al.
CHEMICAL SOCIETY REVIEWS (2010)
Effect of Grain Size on Corrosion: A Review
K. D. Ralston et al.
CORROSION (2010)
Design of experiment study of the parameters that affect performance of three flow plate configurations of a proton exchange membrane fuel cell
J. G. Carton et al.
ENERGY (2010)
The bipolar plate of AISI 1045 steel with chromized coatings prepared by low-temperature pack cementation for proton exchange membrane fuel cell
Ching-Yuan Bai et al.
JOURNAL OF POWER SOURCES (2010)
Ex situ evaluation of nanometer range gold coating on stainless steel substrate for automotive polymer electrolyte membrane fuel cell bipolar plate
A. Kumar et al.
JOURNAL OF POWER SOURCES (2010)
A review of metal separator plate materials suitable for automotive PEM fuel cells
N. de las Heras et al.
ENERGY & ENVIRONMENTAL SCIENCE (2009)
Corrosion behaviors and contact resistances of the low-carbon steel bipolar plate with a chromized coating containing carbides and nitrides
Ching-Yuan Bai et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2009)
Carbon-based films coated 316L stainless steel as bipolar plate for proton exchange membrane fuel cells
Yu Fu et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2009)
Improved corrosion resistance and interfacial contact resistance of 316L stainless-steel for proton exchange membrane fuel cell bipolar plates by chromizing surface treatment
S. B. Lee et al.
JOURNAL OF POWER SOURCES (2009)
Stainless steel bipolar plate coated with carbon nanotube (CNT)/polytetrafluoroethylene (PTFE) composite film for proton exchange membrane fuel cell (PEMFC)
Yoshiyuki Show et al.
JOURNAL OF POWER SOURCES (2009)
Investigation of α to γ transformation in the production of a nanostructured high-nitrogen austenitic stainless steel powder via mechanical alloying
T. Haghir et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
The role of rusts in corrosion and corrosion protection of iron and steel
Hiroki Tamura
CORROSION SCIENCE (2008)
Process modification for coating SnO2:F on stainless steels for PEM fuel cell bipolar plates
Heli Wang et al.
JOURNAL OF POWER SOURCES (2008)
Bipolar plate materials for PEMFCs: A conductivity and stability study
A. Pozio et al.
JOURNAL OF POWER SOURCES (2008)
Development of a niobium clad PEM fuel cell bipolar plate material
K. Scott Weil et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2007)
Effects of O2 and H2 on the corrosion of SS316L metallic bipolar plate materials in simulated anode and cathode environments of PEM fuel cells
Yan Wang et al.
ELECTROCHIMICA ACTA (2007)
SnO2:F coated ferritic stainless steels for PEM fuel cell bipolar plates
Heli Wang et al.
JOURNAL OF POWER SOURCES (2007)
Metal bipolar plates for PEM fuel cell - A review
H. Tawfik et al.
JOURNAL OF POWER SOURCES (2007)
Behavior of intergranular corrosion of ⟨011⟩ tilt grain boundaries of pure copper bicrystals
H Miyamoto et al.
CORROSION SCIENCE (2002)
Share Paper
