Journal
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
Volume 46, Issue 63, Pages 32215-32225Publisher
PERGAMON-ELSEVIER SCIENCE LTD
DOI: 10.1016/j.ijhydene.2021.06.216
Keywords
Proton exchange membrane fuel cell (PEMFC); Catalyst inks; Mechanical shear mixing; High-pressure homogenization; Catalyst layer (CL); Permeability
Categories
Funding
- Program of Ministry of Science & Technology of China [2020YFB0106601]
Ask authors/readers for more resources
This study investigates the impact of catalyst agglomerates on CL morphology and MEA performance, finding that high-pressure homogenization is more effective. However, excessive homogenization pressure results in larger agglomerates, decreased secondary pores, poor water permeability, and lower performance.
Since agglomerates in catalyst inks affect the catalyst layers (CL) and membrane electrode assemblies (MEA) of proton exchange membrane fuel cell (PEMFC), it is important to study the connection among catalyst agglomerates, CL structure, and MEA performance. This study investigates the effect of Pt/GC catalyst agglomerates on the morphology and permeability of the CL by modulating the properties of the catalyst ink in two different ways. Additionally, MEA was further electrochemically tested to understand the relationship between the catalyst agglomerates and MEA performance. The result shows that High-pressure homogenization is more effective than mechanical shear mixing in dispersing the agglomerates in catalyst inks. However, the excessive homogenization pressure produced larger agglomerated particles, probably because more effective dispersion caused by higher homogenization pressure supplies new chain carriers for polymerization and higher temperature caused by higher homogenization pressure. Moreover, the surface of the CL fabricated in inks prepared by a homogenizer is more uniform, neat, and hydrophilic. But the number of secondary pores in the catalyst layer decreases at excessive homogeneous pressure, and the water permeability becomes poor, which in turn result in lower performance and higher mass transfer resistance. The electrochemical performance test results showed that the MEA with a relatively hydrophobic CL had a performance of 0.707 V at 1000 mA cm(-2), which was 30 mV higher than that with a relatively hydrophilic CL. This study provides insights for better tuning the properties of catalyst ink, CL morphology, and permeability to obtain better performance of MEA. (C) 2021 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.
Authors
I am an author on this paper
Click your name to claim this paper and add it to your profile.
Reviews
Recommended
No Data Available