Journal
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
Volume 172, Issue -, Pages -Publisher
PERGAMON-ELSEVIER SCIENCE LTD
DOI: 10.1016/j.ijheatmasstransfer.2021.121133
Keywords
flow boiling; microchannels; multiphase flow; VOF; conjugate heat transfer; surface wettability
Categories
Funding
- European Union [801604]
- European Space Agency (ESA MAP CORA project TOPDESS)
- UK's Engineering and Physical Science Research Council [EP/P013112/1]
- University of Brighton
- European Space Agency (ESA MAP CORA project ENCOM4)
- EPSRC [EP/P013112/1] Funding Source: UKRI
Ask authors/readers for more resources
This paper conducts an advanced numerical investigation on the effect of surface wettability characteristics on bubble growth within microchannels. The results demonstrate a significant impact of surface wettability on heat transfer coefficients, with hydrophilic and hydrophobic surfaces outperforming single-phase reference simulations by approximately 43.9% and 17.8% respectively.
The process of flow boiling within micro-passages plays a very important role in many industrial applications. However, there is still a lack of understanding of the effect of an important controlling parameter: surface wettability. In this paper, an advanced numerical investigation on the effect of wettability characteristics on single and multiple bubble growth during saturated flow boiling conditions within a microchannel is performed. The 3D numerical simulations are conducted with the open-source Computational Fluid Dynamics (CFD) toolbox OpenFOAM, utilising a custom user-enhanced Volume Of Fluid (VOF) solver. The proposed solver enhancements involve an appropriate treatment for spurious velocities dampening, an improved dynamic contact angle treatment, as well as the implementation of a phase-change model in the fluid domain also accounting for Conjugate Heat Transfer (CHT) with the solid domain. In total, three sets of simulations of hydrophilic and hydrophobic surfaces with constant heat and mass flux were performed. In the first set, a single bubble seed was patched close to the inlet of the microchannel and the Heat Transfer Coefficient (HTC) along the channel interface was measured until the nose of the bubble reaches the outlet. The bubble growth and transport process within the channel were analysed, with a minor effect of the wettability characteristics on the HTC observed. In the second set of simulations, multiple recurring nucleation events at the same position were simulated; observing that in such more realistic cases the effect of wettability in the HTC was more profound. Finally, simulations with multiple nucleation sites and recurring nucleation events were conducted to analyse cases closer to reality. These results show indeed that surface wettability plays a significant role on the HTC, with the hydrophilic and hydrophobic cases performing approximately 43.9% and 17.8% higher respectively, compared to the single-phase reference simulations. Additionally, it is found that the dominant heat transfer mechanisms for the hydrophilic and hydrophobic surface are liquid film evaporation and contact line evaporation, respectively, and that for the proposed simulation parameters liquid film evaporation can be considered as a more efficient heat transfer mechanism compared to contact line evaporation. (C) 2021 Elsevier Ltd. All rights reserved.
Authors
I am an author on this paper
Click your name to claim this paper and add it to your profile.
Reviews
Recommended
No Data Available